From mboxrd@z Thu Jan 1 00:00:00 1970 From: linux@roeck-us.net (Guenter Roeck) Date: Sun, 14 Jun 2015 11:23:21 -0700 Subject: [PATCH] ARM: debug: Remove unsupported operand from Kconfig.debug Message-ID: <1434306201-21840-1-git-send-email-linux@roeck-us.net> To: linux-arm-kernel@lists.infradead.org List-Id: linux-arm-kernel.lists.infradead.org arm builds show the following warning. arch/arm/Kconfig.debug:1576:warning: ignoring unsupported character '>' This is due to config DEBUG_UART_8250_WORD bool "Use 32-bit accesses for 8250 UART" depends on DEBUG_LL_UART_8250 || DEBUG_UART_8250 depends on DEBUG_UART_8250_SHIFT >= 2 This may create the false expectation that DEBUG_UART_8250_WORD is enabled if DEBUG_UART_8250_SHIFT is larger than 2, so drop the '>'. Fixes: 0b4cccbec606 ("ARM: debug: add support for word accesses to debug/8250.S") Cc: Russell King Signed-off-by: Guenter Roeck --- arch/arm/Kconfig.debug | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/arm/Kconfig.debug b/arch/arm/Kconfig.debug index f1b157971366..f0655c9350bf 100644 --- a/arch/arm/Kconfig.debug +++ b/arch/arm/Kconfig.debug @@ -1573,7 +1573,7 @@ config DEBUG_UART_8250_SHIFT config DEBUG_UART_8250_WORD bool "Use 32-bit accesses for 8250 UART" depends on DEBUG_LL_UART_8250 || DEBUG_UART_8250 - depends on DEBUG_UART_8250_SHIFT >= 2 + depends on DEBUG_UART_8250_SHIFT = 2 default y if DEBUG_PICOXCELL_UART || DEBUG_SOCFPGA_UART0 || \ DEBUG_SOCFPGA_UART1 || ARCH_KEYSTONE || \ DEBUG_ALPINE_UART0 || \ -- 2.1.0