linux-arm-kernel.lists.infradead.org archive mirror
 help / color / mirror / Atom feed
From: vaibhav.hiremath@linaro.org (Vaibhav Hiremath)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH-V2 07/12] i2c:pxa: Use devm_ variants in probe function
Date: Mon, 15 Jun 2015 21:19:54 +0530	[thread overview]
Message-ID: <1434383399-2370-8-git-send-email-vaibhav.hiremath@linaro.org> (raw)
In-Reply-To: <1434383399-2370-1-git-send-email-vaibhav.hiremath@linaro.org>

This patch cleans up i2c_pxa_probe() function,

 - Use devm_ variants wherever
   This will clean both probe exit and i2c_pxa_remove() functions

 - Check platform resource before parsing any other data from DT/platform

 - Use dev_err on failure from i2c_add_numbered_adapter()

 - Use pr_info instead of printk for KERN_INFO

Signed-off-by: Vaibhav Hiremath <vaibhav.hiremath@linaro.org>
---
 drivers/i2c/busses/i2c-pxa.c | 81 ++++++++++++++++++--------------------------
 1 file changed, 33 insertions(+), 48 deletions(-)

diff --git a/drivers/i2c/busses/i2c-pxa.c b/drivers/i2c/busses/i2c-pxa.c
index b8b3856..0a8b3bb 100644
--- a/drivers/i2c/busses/i2c-pxa.c
+++ b/drivers/i2c/busses/i2c-pxa.c
@@ -1166,10 +1166,22 @@ static int i2c_pxa_probe(struct platform_device *dev)
 	struct resource *res = NULL;
 	int ret, irq;
 
-	i2c = kzalloc(sizeof(struct pxa_i2c), GFP_KERNEL);
+	i2c = devm_kzalloc(&dev->dev, sizeof(struct pxa_i2c), GFP_KERNEL);
 	if (!i2c) {
-		ret = -ENOMEM;
-		goto emalloc;
+		dev_err(&dev->dev, "memory allocation failed\n");
+		return -ENOMEM;
+	}
+
+	res = platform_get_resource(dev, IORESOURCE_MEM, 0);
+	if (!res) {
+		dev_err(&dev->dev, "no mem resource\n");
+		return -ENODEV;
+	}
+
+	irq = platform_get_irq(dev, 0);
+	if (irq < 0) {
+		dev_err(&dev->dev, "no irq resource: %d\n", irq);
+		return irq;
 	}
 
 	/* Default adapter num to device id; i2c_pxa_probe_dt can override. */
@@ -1179,19 +1191,7 @@ static int i2c_pxa_probe(struct platform_device *dev)
 	if (ret > 0)
 		ret = i2c_pxa_probe_pdata(dev, i2c, &i2c_type);
 	if (ret < 0)
-		goto eclk;
-
-	res = platform_get_resource(dev, IORESOURCE_MEM, 0);
-	irq = platform_get_irq(dev, 0);
-	if (res == NULL || irq < 0) {
-		ret = -ENODEV;
-		goto eclk;
-	}
-
-	if (!request_mem_region(res->start, resource_size(res), res->name)) {
-		ret = -ENOMEM;
-		goto eclk;
-	}
+		return ret;
 
 	i2c->adap.owner   = THIS_MODULE;
 	i2c->adap.retries = 5;
@@ -1201,16 +1201,17 @@ static int i2c_pxa_probe(struct platform_device *dev)
 
 	strlcpy(i2c->adap.name, "pxa_i2c-i2c", sizeof(i2c->adap.name));
 
-	i2c->clk = clk_get(&dev->dev, NULL);
+	i2c->clk = devm_clk_get(&dev->dev, NULL);
 	if (IS_ERR(i2c->clk)) {
-		ret = PTR_ERR(i2c->clk);
-		goto eclk;
+		dev_err(&dev->dev, "failed to get the clk\n");
+		return PTR_ERR(i2c->clk);
 	}
 
-	i2c->reg_base = ioremap(res->start, resource_size(res));
-	if (!i2c->reg_base) {
-		ret = -EIO;
-		goto eremap;
+	i2c->reg_base = devm_ioremap_resource(&dev->dev, res);
+	if (IS_ERR(i2c->reg_base)) {
+		dev_err(&dev->dev, "failed to map resource: %ld\n",
+			PTR_ERR(i2c->reg_base));
+		return PTR_ERR(i2c->reg_base);
 	}
 
 	i2c->reg_ibmr = i2c->reg_base + pxa_reg_layout[i2c_type].ibmr;
@@ -1252,11 +1253,13 @@ static int i2c_pxa_probe(struct platform_device *dev)
 		i2c->adap.algo = &i2c_pxa_pio_algorithm;
 	} else {
 		i2c->adap.algo = &i2c_pxa_algorithm;
-		ret = request_irq(irq, i2c_pxa_handler,
+		ret = devm_request_irq(&dev->dev, irq, i2c_pxa_handler,
 				IRQF_SHARED | IRQF_NO_SUSPEND,
 				dev_name(&dev->dev), i2c);
-		if (ret)
+		if (ret) {
+			dev_err(&dev->dev, "failed to request irq: %d\n", ret);
 			goto ereqirq;
+		}
 	}
 
 	i2c_pxa_reset(i2c);
@@ -1269,33 +1272,22 @@ static int i2c_pxa_probe(struct platform_device *dev)
 
 	ret = i2c_add_numbered_adapter(&i2c->adap);
 	if (ret < 0) {
-		printk(KERN_INFO "I2C: Failed to add bus\n");
-		goto eadapt;
+		dev_err(&dev->dev, "failed to add bus: %d\n", ret);
+		goto ereqirq;
 	}
 
 	platform_set_drvdata(dev, i2c);
 
 #ifdef CONFIG_I2C_PXA_SLAVE
-	printk(KERN_INFO "I2C: %s: PXA I2C adapter, slave address %d\n",
-	       dev_name(&i2c->adap.dev), i2c->slave_addr);
+	dev_info(&i2c->adap.dev, " PXA I2C adapter, slave address %d\n",
+		i2c->slave_addr);
 #else
-	printk(KERN_INFO "I2C: %s: PXA I2C adapter\n",
-	       dev_name(&i2c->adap.dev));
+	dev_info(&i2c->adap.dev, " PXA I2C adapter\n");
 #endif
 	return 0;
 
-eadapt:
-	if (!i2c->use_pio)
-		free_irq(irq, i2c);
 ereqirq:
 	clk_disable_unprepare(i2c->clk);
-	iounmap(i2c->reg_base);
-eremap:
-	clk_put(i2c->clk);
-eclk:
-	kfree(i2c);
-emalloc:
-	release_mem_region(res->start, resource_size(res));
 	return ret;
 }
 
@@ -1304,15 +1296,8 @@ static int i2c_pxa_remove(struct platform_device *dev)
 	struct pxa_i2c *i2c = platform_get_drvdata(dev);
 
 	i2c_del_adapter(&i2c->adap);
-	if (!i2c->use_pio)
-		free_irq(i2c->irq, i2c);
 
 	clk_disable_unprepare(i2c->clk);
-	clk_put(i2c->clk);
-
-	iounmap(i2c->reg_base);
-	release_mem_region(i2c->iobase, i2c->iosize);
-	kfree(i2c);
 
 	return 0;
 }
-- 
1.9.1

  parent reply	other threads:[~2015-06-15 15:49 UTC|newest]

Thread overview: 51+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
     [not found] <vaibhav.hiremath@linaro.org>
2015-06-02 18:45 ` [PATCH-RESEND 0/3] i2c: core/pxa: Add support for hardware lock Vaibhav Hiremath
2015-06-02 18:45   ` [PATCH-RESEND 1/3] i2c: core: append hardware lock with bus lock Vaibhav Hiremath
2015-06-02 18:45   ` [PATCH-RESEND 2/3] i2c: pxa: Add support for hardware lock Vaibhav Hiremath
2015-06-02 18:45   ` [PATCH-RESEND 3/3] i2c: pxa: Add pin ctrl support for CP core access Vaibhav Hiremath
2015-06-16  8:28   ` [PATCH-RESEND 0/3] i2c: core/pxa: Add support for hardware lock Vaibhav Hiremath
2015-07-07  6:43     ` Vaibhav Hiremath
2015-10-25  9:52   ` Wolfram Sang
2015-06-15 15:49 ` [PATCH-V2 00/12] i2c: pxa: Fixes, cleanup and support for pxa910 family Vaibhav Hiremath
2015-06-15 15:49   ` [PATCH-V2 01/12] i2c: pxa: keep i2c irq ON in suspend Vaibhav Hiremath
2015-06-15 15:49   ` [PATCH-V2 02/12] i2c: pxa: No need to set slave addr for i2c master mode reset Vaibhav Hiremath
2015-07-03 20:58     ` Robert Jarzmik
2015-06-15 15:49   ` [PATCH-V2 03/12] i2c: pxa: Return I2C_RETRY when timeout in pio mode Vaibhav Hiremath
2015-06-16  5:31     ` Shubhrajyoti Datta
2015-06-16  7:41       ` Vaibhav Hiremath
2015-07-03 21:07     ` Robert Jarzmik
2015-06-15 15:49   ` [PATCH-V2 04/12] i2c: pxa: Reset i2c controller on timeout in interrupt and " Vaibhav Hiremath
2015-07-03 15:27     ` Robert Jarzmik
2015-07-03 18:13       ` Vaibhav Hiremath
2015-06-15 15:49   ` [PATCH-V2 05/12] i2c: pxa: Remove compile warnning in 64bit mode Vaibhav Hiremath
2015-06-15 15:49   ` [PATCH-V2 06/12] i2c: pxa: Update debug function to dump more info on error Vaibhav Hiremath
2015-06-15 15:49   ` Vaibhav Hiremath [this message]
2015-07-03 15:28     ` [PATCH-V2 07/12] i2c:pxa: Use devm_ variants in probe function Robert Jarzmik
2015-07-03 18:14       ` Vaibhav Hiremath
2015-06-15 15:49   ` [PATCH-V2 08/12] i2c: pxa: enable/disable i2c module across msg xfer Vaibhav Hiremath
2015-07-03 15:28     ` Robert Jarzmik
2015-07-03 18:23       ` Vaibhav Hiremath
2015-07-03 18:48         ` Vaibhav Hiremath
2015-07-03 19:44           ` Robert Jarzmik
2015-06-15 15:49   ` [PATCH-V2 09/12] Documentation: binding: add new property 'disable_after_xfer' to i2c-pxa Vaibhav Hiremath
2015-06-15 15:49   ` [PATCH-V2 10/12] i2c: pxa: Add support for pxa910/988 & new configuration features Vaibhav Hiremath
2015-06-15 15:49   ` [PATCH-V2 11/12] i2c: pxa: Add ILCR (tLow & tHigh) configuration support Vaibhav Hiremath
2015-07-03 15:28     ` Robert Jarzmik
2015-07-03 18:17       ` Vaibhav Hiremath
2015-06-15 15:49   ` [PATCH-V2 12/12] Documentation: binding: add sclk adjustment properties to i2c-pxa Vaibhav Hiremath
2015-06-16 13:22     ` Rob Herring
2015-06-16 14:25       ` Vaibhav Hiremath
2015-06-29  8:52   ` [PATCH-V2 00/12] i2c: pxa: Fixes, cleanup and support for pxa910 family Vaibhav Hiremath
2015-07-02 16:54     ` Vaibhav Hiremath
2015-06-17 18:58 ` [PATCH-v2 0/3] mfd: 88pm800: Add Device tree support Vaibhav Hiremath
2015-06-17 18:58   ` [PATCH-v2 1/3] mfd: 88pm800: Add device " Vaibhav Hiremath
2015-06-17 18:58   ` [PATCH-v2] rtc: 88pm80x: add " Vaibhav Hiremath
2015-06-20  0:43     ` [rtc-linux] " Alexandre Belloni
2015-06-25  7:46       ` Vaibhav Hiremath
2015-07-07  6:37         ` Vaibhav Hiremath
2015-06-17 18:58   ` [PATCH-v2 2/3] mfd: 88pm800: Allow configuration of interrupt clear method Vaibhav Hiremath
2015-06-17 18:58   ` [PATCH-v2 3/3] mfd: devicetree: bindings: Add new 88pm800 mfd binding Vaibhav Hiremath
2015-06-23 15:37     ` Rob Herring
2015-06-23 17:02       ` Vaibhav Hiremath
2015-06-24  0:29     ` Krzysztof Kozlowski
2015-06-24  5:19       ` Vaibhav Hiremath
2015-06-23  5:07   ` [PATCH-v2 0/3] mfd: 88pm800: Add Device tree support Vaibhav Hiremath

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1434383399-2370-8-git-send-email-vaibhav.hiremath@linaro.org \
    --to=vaibhav.hiremath@linaro.org \
    --cc=linux-arm-kernel@lists.infradead.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).