linux-arm-kernel.lists.infradead.org archive mirror
 help / color / mirror / Atom feed
From: matthias.bgg@gmail.com (Matthias Brugger)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH v4 0/3] clk: Add regmap support for clk mulitplexer
Date: Tue, 16 Jun 2015 16:23:32 +0200	[thread overview]
Message-ID: <1434464615-9080-1-git-send-email-matthias.bgg@gmail.com> (raw)

This patch set adds regmap support for the simple clock multiplexer,
the divider clock and the clock gate.
Regmap use, apart from a pointer to the regmap struct, needs an
offset value to know where in the regmap it has to read/write.
We add both fields to the corresponding structs.

The driver will distinguish between a clock which is based on regmap or not
through a flag specified in the clock hardware struct.
The approach does not break the existing clock framework API but adds
new functions for registering regmap clocks. Unregistering the clocks is
independent of the use of regmap or not, so that no new functions were
implemented.

As an example user of the regmap clock multiplexer, it was implemented on
the mt8135. When accepted it will also be applied to the other Mediatek SoCs.
Other possible user are Qualcomm SoCs which up to now implement their own
regmap based clock multiplexer.

This patch set is based on linux next.
To get the mt8135 eval board up and running, we need to enable the clock
support [1] and use the two clocks for the uart port [2].

Any comments welcome.

[1] https://patchwork.kernel.org/patch/6261141/
[2] https://patchwork.kernel.org/patch/6261151/

Changes for v4:
- fix style issues
- use __clk_get_flags
- delete #ifdef CONFIG_REGMAP

Changes for v3:
- rebase against linux-next
- provide regmap access to all three clock types in a unified way

Changes for v2:
- use regmap_update_bits instead of read-write
- fix flag check
- add union in struct clk_mux
- fix typo in commit message

---

Matthias Brugger (3):
  clk: Add regmap support
  clk: mediatek: Add support for clk-mux using regmap
  clk: mediatek: Use regmap clk-mux for mt8135

 drivers/clk/Makefile              |  1 +
 drivers/clk/clk-divider.c         | 68 ++++++++++++++++++++++------
 drivers/clk/clk-gate.c            | 57 +++++++++++++++++++-----
 drivers/clk/clk-io.c              | 48 ++++++++++++++++++++
 drivers/clk/clk-io.h              | 22 +++++++++
 drivers/clk/clk-mux.c             | 94 ++++++++++++++++++++++++++++++++-------
 drivers/clk/mediatek/clk-mt8135.c | 21 +++------
 drivers/clk/mediatek/clk-mtk.c    | 37 +++++++++++++++
 drivers/clk/mediatek/clk-mtk.h    | 26 +++++++++++
 include/linux/clk-provider.h      | 54 ++++++++++++++++++++--
 10 files changed, 370 insertions(+), 58 deletions(-)
 create mode 100644 drivers/clk/clk-io.c
 create mode 100644 drivers/clk/clk-io.h

-- 
1.9.1

             reply	other threads:[~2015-06-16 14:23 UTC|newest]

Thread overview: 7+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2015-06-16 14:23 Matthias Brugger [this message]
2015-06-16 14:23 ` [PATCH v4 1/3] clk: Add regmap support Matthias Brugger
2015-06-19 16:01   ` Joachim Eastwood
2015-06-19 18:10   ` Heiko Stuebner
2015-06-16 14:23 ` [PATCH v4 2/3] clk: mediatek: Add support for clk-mux using regmap Matthias Brugger
2015-06-16 14:23 ` [PATCH v4 3/3] clk: mediatek: Use regmap clk-mux for mt8135 Matthias Brugger
2015-07-07 10:37 ` [PATCH v4 0/3] clk: Add regmap support for clk mulitplexer Matthias Brugger

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1434464615-9080-1-git-send-email-matthias.bgg@gmail.com \
    --to=matthias.bgg@gmail.com \
    --cc=linux-arm-kernel@lists.infradead.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).