From: thomas.petazzoni@free-electrons.com (Thomas Petazzoni)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCHv2 5/5] dmaengine: mv_xor: de-duplicate mv_chan_set_mode*()
Date: Wed, 17 Jun 2015 18:04:46 +0200 [thread overview]
Message-ID: <1434557086-9520-6-git-send-email-thomas.petazzoni@free-electrons.com> (raw)
In-Reply-To: <1434557086-9520-1-git-send-email-thomas.petazzoni@free-electrons.com>
When commit 6f166312c6ea2 ("dmaengine: mv_xor: add support for a38x
command in descriptor mode") added support for the descriptor mode
available in Marvell Armada 38x and later SoCs, it added a new
function mv_chan_set_mode_to_desc() which allows to configure a XOR
channel to get the specific operation to be done from each individual
DMA descriptor.
However, this function was mainly a duplicate of the existing
mv_chan_set_mode(), with just the operation being different.
This commit re-organizes the code into a single mv_chan_set_mode()
function, which takes the operation mode as argument, and the
mv_xor_channel_add() function decides whether to use
XOR_OPERATION_MODE_IN_DESC or XOR_OPERATION_MODE_XOR.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
---
drivers/dma/mv_xor.c | 41 +++--------------------------------------
1 file changed, 3 insertions(+), 38 deletions(-)
diff --git a/drivers/dma/mv_xor.c b/drivers/dma/mv_xor.c
index 1fe3e33..6e09d59 100644
--- a/drivers/dma/mv_xor.c
+++ b/drivers/dma/mv_xor.c
@@ -139,45 +139,10 @@ static void mv_chan_clear_err_status(struct mv_xor_chan *chan)
}
static void mv_chan_set_mode(struct mv_xor_chan *chan,
- enum dma_transaction_type type)
+ u32 op_mode)
{
- u32 op_mode;
u32 config = readl_relaxed(XOR_CONFIG(chan));
- switch (type) {
- case DMA_XOR:
- op_mode = XOR_OPERATION_MODE_XOR;
- break;
- case DMA_MEMCPY:
- op_mode = XOR_OPERATION_MODE_MEMCPY;
- break;
- default:
- dev_err(mv_chan_to_devp(chan),
- "error: unsupported operation %d\n",
- type);
- BUG();
- return;
- }
-
- config &= ~0x7;
- config |= op_mode;
-
-#if defined(__BIG_ENDIAN)
- config |= XOR_DESCRIPTOR_SWAP;
-#else
- config &= ~XOR_DESCRIPTOR_SWAP;
-#endif
-
- writel_relaxed(config, XOR_CONFIG(chan));
-}
-
-static void mv_chan_set_mode_to_desc(struct mv_xor_chan *chan)
-{
- u32 op_mode;
- u32 config = readl_relaxed(XOR_CONFIG(chan));
-
- op_mode = XOR_OPERATION_MODE_IN_DESC;
-
config &= ~0x7;
config |= op_mode;
@@ -1042,9 +1007,9 @@ mv_xor_channel_add(struct mv_xor_device *xordev,
mv_chan_unmask_interrupts(mv_chan);
if (mv_chan->op_in_desc == XOR_MODE_IN_DESC)
- mv_chan_set_mode_to_desc(mv_chan);
+ mv_chan_set_mode(mv_chan, XOR_OPERATION_MODE_IN_DESC);
else
- mv_chan_set_mode(mv_chan, DMA_XOR);
+ mv_chan_set_mode(mv_chan, XOR_OPERATION_MODE_XOR);
spin_lock_init(&mv_chan->lock);
INIT_LIST_HEAD(&mv_chan->chain);
--
2.1.0
next prev parent reply other threads:[~2015-06-17 16:04 UTC|newest]
Thread overview: 9+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-06-17 16:04 [PATCHv2 0/5] dmaengine: mv_xor fixes and improvements Thomas Petazzoni
2015-06-17 16:04 ` [PATCHv2 1/5] dmaengine: mv_xor: fix big endian operation in register mode Thomas Petazzoni
2015-06-17 16:04 ` [PATCHv2 2/5] dmaengine: mv_xor: add suspend/resume support Thomas Petazzoni
2015-06-17 16:04 ` [PATCHv2 3/5] dmaengine: mv_xor: remove support for dmacap, * DT properties Thomas Petazzoni
2015-06-19 10:06 ` [PATCHv2 3/5] dmaengine: mv_xor: remove support for dmacap,* " Maxime Ripard
2015-06-17 16:04 ` [PATCHv2 4/5] dmaengine: mv_xor: remove mv_xor_chan->current_type field Thomas Petazzoni
2015-06-19 10:06 ` Maxime Ripard
2015-06-17 16:04 ` Thomas Petazzoni [this message]
2015-06-19 10:12 ` [PATCHv2 5/5] dmaengine: mv_xor: de-duplicate mv_chan_set_mode*() Maxime Ripard
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1434557086-9520-6-git-send-email-thomas.petazzoni@free-electrons.com \
--to=thomas.petazzoni@free-electrons.com \
--cc=linux-arm-kernel@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox