From: aisheng.dong@freescale.com (Dong Aisheng)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH 2/5] dts: imx53: fix sd card gpio polarity specified in device tree
Date: Thu, 18 Jun 2015 01:33:35 +0800 [thread overview]
Message-ID: <1434562418-24090-3-git-send-email-aisheng.dong@freescale.com> (raw)
In-Reply-To: <1434562418-24090-1-git-send-email-aisheng.dong@freescale.com>
cd-gpios polarity should be changed to GPIO_ACTIVE_LOW and wp-gpios
should be changed to GPIO_ACTIVE_HIGH.
Otherwise, the SD may not work properly due to wrong polarity inversion
specified in DT after switch to common parsing function mmc_of_parse().
Signed-off-by: Dong Aisheng <aisheng.dong@freescale.com>
---
arch/arm/boot/dts/imx53-ard.dts | 4 ++--
arch/arm/boot/dts/imx53-m53evk.dts | 4 ++--
arch/arm/boot/dts/imx53-qsb-common.dtsi | 4 ++--
arch/arm/boot/dts/imx53-smd.dts | 4 ++--
arch/arm/boot/dts/imx53-tqma53.dtsi | 4 ++--
arch/arm/boot/dts/imx53-tx53.dtsi | 4 ++--
arch/arm/boot/dts/imx53-voipac-bsb.dts | 4 ++--
7 files changed, 14 insertions(+), 14 deletions(-)
diff --git a/arch/arm/boot/dts/imx53-ard.dts b/arch/arm/boot/dts/imx53-ard.dts
index e9337ad..3bc1883 100644
--- a/arch/arm/boot/dts/imx53-ard.dts
+++ b/arch/arm/boot/dts/imx53-ard.dts
@@ -103,8 +103,8 @@
&esdhc1 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_esdhc1>;
- cd-gpios = <&gpio1 1 0>;
- wp-gpios = <&gpio1 9 0>;
+ cd-gpios = <&gpio1 1 GPIO_ACTIVE_LOW>;
+ wp-gpios = <&gpio1 9 GPIO_ACTIVE_HIGH>;
status = "okay";
};
diff --git a/arch/arm/boot/dts/imx53-m53evk.dts b/arch/arm/boot/dts/imx53-m53evk.dts
index d0e0f57..53f4088 100644
--- a/arch/arm/boot/dts/imx53-m53evk.dts
+++ b/arch/arm/boot/dts/imx53-m53evk.dts
@@ -124,8 +124,8 @@
&esdhc1 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_esdhc1>;
- cd-gpios = <&gpio1 1 0>;
- wp-gpios = <&gpio1 9 0>;
+ cd-gpios = <&gpio1 1 GPIO_ACTIVE_LOW>;
+ wp-gpios = <&gpio1 9 GPIO_ACTIVE_HIGH>;
status = "okay";
};
diff --git a/arch/arm/boot/dts/imx53-qsb-common.dtsi b/arch/arm/boot/dts/imx53-qsb-common.dtsi
index 181ae5e..1f55187 100644
--- a/arch/arm/boot/dts/imx53-qsb-common.dtsi
+++ b/arch/arm/boot/dts/imx53-qsb-common.dtsi
@@ -147,8 +147,8 @@
&esdhc3 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_esdhc3>;
- cd-gpios = <&gpio3 11 0>;
- wp-gpios = <&gpio3 12 0>;
+ cd-gpios = <&gpio3 11 GPIO_ACTIVE_LOW>;
+ wp-gpios = <&gpio3 12 GPIO_ACTIVE_HIGH>;
bus-width = <8>;
status = "okay";
};
diff --git a/arch/arm/boot/dts/imx53-smd.dts b/arch/arm/boot/dts/imx53-smd.dts
index 1d32557..fc89ce1 100644
--- a/arch/arm/boot/dts/imx53-smd.dts
+++ b/arch/arm/boot/dts/imx53-smd.dts
@@ -41,8 +41,8 @@
&esdhc1 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_esdhc1>;
- cd-gpios = <&gpio3 13 0>;
- wp-gpios = <&gpio4 11 0>;
+ cd-gpios = <&gpio3 13 GPIO_ACTIVE_LOW>;
+ wp-gpios = <&gpio4 11 GPIO_ACTIVE_HIGH>;
status = "okay";
};
diff --git a/arch/arm/boot/dts/imx53-tqma53.dtsi b/arch/arm/boot/dts/imx53-tqma53.dtsi
index 4f1f0e2..e03373a 100644
--- a/arch/arm/boot/dts/imx53-tqma53.dtsi
+++ b/arch/arm/boot/dts/imx53-tqma53.dtsi
@@ -41,8 +41,8 @@
pinctrl-0 = <&pinctrl_esdhc2>,
<&pinctrl_esdhc2_cdwp>;
vmmc-supply = <®_3p3v>;
- wp-gpios = <&gpio1 2 0>;
- cd-gpios = <&gpio1 4 0>;
+ wp-gpios = <&gpio1 2 GPIO_ACTIVE_HIGH>;
+ cd-gpios = <&gpio1 4 GPIO_ACTIVE_LOW>;
status = "disabled";
};
diff --git a/arch/arm/boot/dts/imx53-tx53.dtsi b/arch/arm/boot/dts/imx53-tx53.dtsi
index 704bd72..d3e50b2 100644
--- a/arch/arm/boot/dts/imx53-tx53.dtsi
+++ b/arch/arm/boot/dts/imx53-tx53.dtsi
@@ -183,7 +183,7 @@
};
&esdhc1 {
- cd-gpios = <&gpio3 24 GPIO_ACTIVE_HIGH>;
+ cd-gpios = <&gpio3 24 GPIO_ACTIVE_LOW>;
fsl,wp-controller;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_esdhc1>;
@@ -191,7 +191,7 @@
};
&esdhc2 {
- cd-gpios = <&gpio3 25 GPIO_ACTIVE_HIGH>;
+ cd-gpios = <&gpio3 25 GPIO_ACTIVE_LOW>;
fsl,wp-controller;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_esdhc2>;
diff --git a/arch/arm/boot/dts/imx53-voipac-bsb.dts b/arch/arm/boot/dts/imx53-voipac-bsb.dts
index c17d3ad..fc51b87 100644
--- a/arch/arm/boot/dts/imx53-voipac-bsb.dts
+++ b/arch/arm/boot/dts/imx53-voipac-bsb.dts
@@ -119,8 +119,8 @@
&esdhc2 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_esdhc2>;
- cd-gpios = <&gpio3 25 0>;
- wp-gpios = <&gpio2 19 0>;
+ cd-gpios = <&gpio3 25 GPIO_ACTIVE_LOW>;
+ wp-gpios = <&gpio2 19 GPIO_ACTIVE_HIGH>;
vmmc-supply = <®_3p3v>;
status = "okay";
};
--
1.9.1
next prev parent reply other threads:[~2015-06-17 17:33 UTC|newest]
Thread overview: 6+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-06-17 17:33 [PATCH 0/5] dts: imx: fix sd card gpio polarity specified in device tree Dong Aisheng
2015-06-17 17:33 ` [PATCH 1/5] dts: imx51: " Dong Aisheng
2015-06-17 17:33 ` Dong Aisheng [this message]
2015-06-17 17:33 ` [PATCH 3/5] dts: imx6: " Dong Aisheng
2015-06-17 17:33 ` [PATCH 4/5] dts: imx25: " Dong Aisheng
2015-06-17 17:33 ` [PATCH 5/5] dts: imx7: " Dong Aisheng
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1434562418-24090-3-git-send-email-aisheng.dong@freescale.com \
--to=aisheng.dong@freescale.com \
--cc=linux-arm-kernel@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).