From: simon.guinot@sequanux.org (Simon Guinot)
To: linux-arm-kernel@lists.infradead.org
Subject: [RESEND PATCH 2/4] ARM: Kirkwood: add modes-map property to ns2-leds nodes
Date: Thu, 18 Jun 2015 17:17:28 +0200 [thread overview]
Message-ID: <1434640650-28086-3-git-send-email-simon.guinot@sequanux.org> (raw)
In-Reply-To: <1434640650-28086-1-git-send-email-simon.guinot@sequanux.org>
From: Vincent Donnefort <vdonnefort@gmail.com>
Since the LED modes mapping is no longer hardcoded inside the leds-ns2
driver, then it must be provided through the modes-map property in the
ns2-leds nodes.
Signed-off-by: Vincent Donnefort <vdonnefort@gmail.com>
---
arch/arm/boot/dts/kirkwood-d2net.dts | 5 +++++
arch/arm/boot/dts/kirkwood-is2.dts | 5 +++++
arch/arm/boot/dts/kirkwood-ns2.dts | 5 +++++
arch/arm/boot/dts/kirkwood-ns2max.dts | 5 +++++
arch/arm/boot/dts/kirkwood-ns2mini.dts | 5 +++++
5 files changed, 25 insertions(+)
diff --git a/arch/arm/boot/dts/kirkwood-d2net.dts b/arch/arm/boot/dts/kirkwood-d2net.dts
index 6b7856025001..e1c25c35e9ce 100644
--- a/arch/arm/boot/dts/kirkwood-d2net.dts
+++ b/arch/arm/boot/dts/kirkwood-d2net.dts
@@ -10,6 +10,7 @@
/dts-v1/;
+#include <dt-bindings/leds/leds-ns2.h>
#include "kirkwood-netxbig.dtsi"
/ {
@@ -28,6 +29,10 @@
label = "d2net_v2:blue:sata";
slow-gpio = <&gpio0 29 GPIO_ACTIVE_HIGH>;
cmd-gpio = <&gpio0 30 GPIO_ACTIVE_HIGH>;
+ modes-map = <NS_V2_LED_OFF 1 0
+ NS_V2_LED_ON 0 1
+ NS_V2_LED_ON 1 1
+ NS_V2_LED_SATA 0 0>;
};
};
diff --git a/arch/arm/boot/dts/kirkwood-is2.dts b/arch/arm/boot/dts/kirkwood-is2.dts
index da674bbd49a8..4121674abd1c 100644
--- a/arch/arm/boot/dts/kirkwood-is2.dts
+++ b/arch/arm/boot/dts/kirkwood-is2.dts
@@ -1,5 +1,6 @@
/dts-v1/;
+#include <dt-bindings/leds/leds-ns2.h>
#include "kirkwood-ns2-common.dtsi"
/ {
@@ -27,6 +28,10 @@
label = "ns2:blue:sata";
slow-gpio = <&gpio0 29 0>;
cmd-gpio = <&gpio0 30 0>;
+ modes-map = <NS_V2_LED_OFF 1 0
+ NS_V2_LED_ON 0 1
+ NS_V2_LED_ON 1 1
+ NS_V2_LED_SATA 0 0>;
};
};
};
diff --git a/arch/arm/boot/dts/kirkwood-ns2.dts b/arch/arm/boot/dts/kirkwood-ns2.dts
index 53368d1022cc..190189d235e6 100644
--- a/arch/arm/boot/dts/kirkwood-ns2.dts
+++ b/arch/arm/boot/dts/kirkwood-ns2.dts
@@ -1,5 +1,6 @@
/dts-v1/;
+#include <dt-bindings/leds/leds-ns2.h>
#include "kirkwood-ns2-common.dtsi"
/ {
@@ -27,6 +28,10 @@
label = "ns2:blue:sata";
slow-gpio = <&gpio0 29 0>;
cmd-gpio = <&gpio0 30 0>;
+ modes-map = <NS_V2_LED_OFF 1 0
+ NS_V2_LED_ON 0 1
+ NS_V2_LED_ON 1 1
+ NS_V2_LED_SATA 0 0>;
};
};
};
diff --git a/arch/arm/boot/dts/kirkwood-ns2max.dts b/arch/arm/boot/dts/kirkwood-ns2max.dts
index 72c78d0b1116..55cc41d9c80c 100644
--- a/arch/arm/boot/dts/kirkwood-ns2max.dts
+++ b/arch/arm/boot/dts/kirkwood-ns2max.dts
@@ -1,5 +1,6 @@
/dts-v1/;
+#include <dt-bindings/leds/leds-ns2.h>
#include "kirkwood-ns2-common.dtsi"
/ {
@@ -46,6 +47,10 @@
label = "ns2:blue:sata";
slow-gpio = <&gpio0 29 0>;
cmd-gpio = <&gpio0 30 0>;
+ modes-map = <NS_V2_LED_OFF 1 0
+ NS_V2_LED_ON 0 1
+ NS_V2_LED_ON 1 1
+ NS_V2_LED_SATA 0 0>;
};
};
};
diff --git a/arch/arm/boot/dts/kirkwood-ns2mini.dts b/arch/arm/boot/dts/kirkwood-ns2mini.dts
index c441bf62c09f..9935f3ec29b4 100644
--- a/arch/arm/boot/dts/kirkwood-ns2mini.dts
+++ b/arch/arm/boot/dts/kirkwood-ns2mini.dts
@@ -1,5 +1,6 @@
/dts-v1/;
+#include <dt-bindings/leds/leds-ns2.h>
#include "kirkwood-ns2-common.dtsi"
/ {
@@ -47,6 +48,10 @@
label = "ns2:blue:sata";
slow-gpio = <&gpio0 29 0>;
cmd-gpio = <&gpio0 30 0>;
+ modes-map = <NS_V2_LED_OFF 1 0
+ NS_V2_LED_ON 0 1
+ NS_V2_LED_ON 1 1
+ NS_V2_LED_SATA 0 0>;
};
};
};
--
2.1.4
next prev parent reply other threads:[~2015-06-18 15:17 UTC|newest]
Thread overview: 14+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-06-18 15:17 [RESEND PATCH 0/4] Allow to use leds-ns2 with n090401 boards Simon Guinot
2015-06-18 15:17 ` [RESEND PATCH 1/4] leds: leds-ns2: move LED modes mapping outside of the driver Simon Guinot
2015-06-22 14:32 ` Jacek Anaszewski
2015-06-23 18:12 ` Simon Guinot
2015-06-24 7:34 ` Jacek Anaszewski
2015-06-18 15:17 ` Simon Guinot [this message]
2015-06-18 15:17 ` [RESEND PATCH 3/4] leds: leds-ns2: handle can_sleep GPIOs Simon Guinot
2015-06-22 14:33 ` Jacek Anaszewski
2015-06-24 14:18 ` Jacek Anaszewski
2015-06-26 17:10 ` Simon Guinot
2015-06-29 14:25 ` Jacek Anaszewski
2015-06-29 14:41 ` Simon Guinot
2015-06-18 15:17 ` [RESEND PATCH 4/4] leds: leds-ns2: depends on MACH_ARMADA_370 Simon Guinot
2015-06-22 14:33 ` Jacek Anaszewski
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1434640650-28086-3-git-send-email-simon.guinot@sequanux.org \
--to=simon.guinot@sequanux.org \
--cc=linux-arm-kernel@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).