[PATCHv5 0/2] Adding driver for Xilinx LogiCORE IP mailbox.

[moritz.fischer@ettus.com (Moritz Fischer)]

This patchset adds mailbox framework integration for the Xilinx LogiCORE IP
mailbox.  The Xilinx LogiCORE IP mailbox is a fpga softcore that allows
interprocessor communication between AXI4 stream / memory mapped
processors.

Changes from v4:
- Have separate mbox_ops structs for polling / irq mode
- Moved clk handling to startup / shutdown
- Embedded struct mbox_chan in struct xilinx_mbox
- Fixed mbox-cells in devicetree documentation
- Misc stylistic issues

Changes from v3:
- Stylistic changes
- Changed reg size in dts to 0x100

Changes from v2:
- Fixed error condition for IRQ from >= 0 to > 0
- Fixed clock enable
- Cleaned up docs

Changes from v1:
- Added common clock framework support
- Deal with IRQs that happend before driver load,
  since HW will not let us know about them when we enable IRQs

Changes from v0:
- Several stylistic issues
- Dropped superfluous intr_mode member
- Really masking the IRQs on mailbox_shutdown
- No longer using polling by accident in non-IRQ mode
- Swapped doc and driver commits

Happy hacking,

Moritz

Moritz Fischer (2):
  dts: Adding docs for Xilinx LogiCORE IP mailbox driver.
  mailbox: Adding driver for Xilinx LogiCORE IP mailbox.

 .../devicetree/bindings/mailbox/xilinx-mailbox.txt |  44 +++
 MAINTAINERS                                        |   7 +
 drivers/mailbox/Kconfig                            |   8 +
 drivers/mailbox/Makefile                           |   2 +
 drivers/mailbox/mailbox-xilinx.c                   | 375 +++++++++++++++++++++
 5 files changed, 436 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/mailbox/xilinx-mailbox.txt
 create mode 100644 drivers/mailbox/mailbox-xilinx.c

-- 
2.4.2