linux-arm-kernel.lists.infradead.org archive mirror
 help / color / mirror / Atom feed
From: hdegoede@redhat.com (Hans de Goede)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH v3 3/4] mfd: axp20x: Add a cell for the usb power_supply part of the axp20x PMICs
Date: Fri, 26 Jun 2015 12:59:16 +0200	[thread overview]
Message-ID: <1435316357-26606-3-git-send-email-hdegoede@redhat.com> (raw)
In-Reply-To: <1435316357-26606-1-git-send-email-hdegoede@redhat.com>

Add a cell for the usb power_supply part of the axp20x PMICs.

Note that this cell is only for the usb power_supply part and not the
ac-power / battery-charger / rtc-backup-bat-charger bits.

Depending on the board each of those must be enabled / disabled separately
in devicetree as most boards do not use all 4. So in dt each one needs its
own child-node of the axp20x node. Another reason for using separate child
nodes for each is so that other devicetree nodes can have a power-supply
property with a phandle referencing a node representing a single
power-supply.

The decision to use a separate devicetree node for each is reflected on
the kernel side by each getting its own mfd-cell / platform_device and
platform-driver.

Note this commit also makes some whitespace changes to the intialization
of existing cells in axp20x_cells, these are pure whitespace changes,
functionally nothing changes.

Cc: Bruno Pr?mont <bonbons@linux-vserver.org>
Acked-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Bruno Pr?mont <bonbons@linux-vserver.org>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
---
Changes in v2:
-Use DEFINE_RES_IRQ_NAMED
-Change indentation of axp20x_cells initializers to avoid line wrapping
Changes in v3:
-Improve commit message
-Add Bruno's S-o-b
---
 drivers/mfd/axp20x.c | 20 ++++++++++++++++----
 1 file changed, 16 insertions(+), 4 deletions(-)

diff --git a/drivers/mfd/axp20x.c b/drivers/mfd/axp20x.c
index f9a3c2d..ca4a604 100644
--- a/drivers/mfd/axp20x.c
+++ b/drivers/mfd/axp20x.c
@@ -113,6 +113,13 @@ static struct resource axp20x_pek_resources[] = {
 	},
 };
 
+static struct resource axp20x_usb_power_supply_resources[] = {
+	DEFINE_RES_IRQ_NAMED(AXP20X_IRQ_VBUS_PLUGIN, "VBUS_PLUGIN"),
+	DEFINE_RES_IRQ_NAMED(AXP20X_IRQ_VBUS_REMOVAL, "VBUS_REMOVAL"),
+	DEFINE_RES_IRQ_NAMED(AXP20X_IRQ_VBUS_VALID, "VBUS_VALID"),
+	DEFINE_RES_IRQ_NAMED(AXP20X_IRQ_VBUS_NOT_VALID, "VBUS_NOT_VALID"),
+};
+
 static struct resource axp22x_pek_resources[] = {
 	{
 		.name   = "PEK_DBR",
@@ -363,11 +370,16 @@ static const struct regmap_irq_chip axp288_regmap_irq_chip = {
 
 static struct mfd_cell axp20x_cells[] = {
 	{
-		.name			= "axp20x-pek",
-		.num_resources		= ARRAY_SIZE(axp20x_pek_resources),
-		.resources		= axp20x_pek_resources,
+		.name		= "axp20x-pek",
+		.num_resources	= ARRAY_SIZE(axp20x_pek_resources),
+		.resources	= axp20x_pek_resources,
 	}, {
-		.name			= "axp20x-regulator",
+		.name		= "axp20x-regulator",
+	}, {
+		.name		= "axp20x-usb-power-supply",
+		.of_compatible	= "x-powers,axp202-usb-power-supply",
+		.num_resources	= ARRAY_SIZE(axp20x_usb_power_supply_resources),
+		.resources	= axp20x_usb_power_supply_resources,
 	},
 };
 
-- 
2.4.3

  parent reply	other threads:[~2015-06-26 10:59 UTC|newest]

Thread overview: 20+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2015-06-26 10:59 [PATCH v3 1/4] ARM: dts: Add binding documentation for AXP20x pmic usb power supply Hans de Goede
2015-06-26 10:59 ` [PATCH v3 2/4] mfd: axp20x: Add missing registers, and mark more registers volatile Hans de Goede
2015-07-06 10:21   ` Maxime Ripard
2015-07-07  7:01   ` Lee Jones
2015-06-26 10:59 ` Hans de Goede [this message]
2015-07-06 10:30   ` [PATCH v3 3/4] mfd: axp20x: Add a cell for the usb power_supply part of the axp20x PMICs Maxime Ripard
2015-07-07  7:01   ` Lee Jones
2015-07-07  9:49     ` [linux-sunxi] " Hans de Goede
2015-07-07 10:42       ` Lee Jones
2015-06-26 10:59 ` [PATCH v3 4/4] power: Add an axp20x-usb-power driver Hans de Goede
2015-06-27  5:28   ` Krzysztof Kozlowski
2015-06-27 20:25     ` Bruno Prémont
2015-06-28 10:16       ` Krzysztof Kozlowski
2015-07-06 10:40   ` Maxime Ripard
2015-07-06 12:20     ` [linux-sunxi] " Hans de Goede
2015-07-24 15:10   ` Sebastian Reichel
2015-08-01  7:44     ` Hans de Goede
2015-08-12 12:22     ` Hans de Goede
2015-07-24 14:59 ` [PATCH v3 1/4] ARM: dts: Add binding documentation for AXP20x pmic usb power supply Sebastian Reichel
2015-08-01  7:43   ` Hans de Goede

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1435316357-26606-3-git-send-email-hdegoede@redhat.com \
    --to=hdegoede@redhat.com \
    --cc=linux-arm-kernel@lists.infradead.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).