From mboxrd@z Thu Jan 1 00:00:00 1970 From: digetx@gmail.com (Dmitry Osipenko) Date: Sun, 28 Jun 2015 22:34:44 +0300 Subject: [PATCH] ARM: tegra: paz00: set gpiod_lookup table conn_id's Message-ID: <1435520160-16862-1-git-send-email-digetx@gmail.com> To: linux-arm-kernel@lists.infradead.org List-Id: linux-arm-kernel.lists.infradead.org Commit 72daceb9a10a ("net: rfkill: gpio: Add default GPIO driver mappings for ACPI") removed possibility to request GPIO by table index for non-ACPI platforms without changing it users. As result "shutdown" GPIO request will fail if request for "reset" GPIO succeeded or "reset" will be requested instead of "shutdown" if "reset" wasn't defined. Fix it by setting conn_id's in gpiod_lookup_table. Signed-off-by: Dmitry Osipenko Fixes: 72daceb (net: rfkill: gpio: Add default GPIO driver mappings for ACPI) Cc: # v3.19+ --- arch/arm/mach-tegra/board-paz00.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/arch/arm/mach-tegra/board-paz00.c b/arch/arm/mach-tegra/board-paz00.c index fbe74c6..67024f3 100644 --- a/arch/arm/mach-tegra/board-paz00.c +++ b/arch/arm/mach-tegra/board-paz00.c @@ -39,8 +39,8 @@ static struct platform_device wifi_rfkill_device = { static struct gpiod_lookup_table wifi_gpio_lookup = { .dev_id = "rfkill_gpio", .table = { - GPIO_LOOKUP_IDX("tegra-gpio", 25, NULL, 0, 0), - GPIO_LOOKUP_IDX("tegra-gpio", 85, NULL, 1, 0), + GPIO_LOOKUP_IDX("tegra-gpio", 25, "reset", 0, 0), + GPIO_LOOKUP_IDX("tegra-gpio", 85, "shutdown", 1, 0), { }, }, }; -- 2.4.4