linux-arm-kernel.lists.infradead.org archive mirror
 help / color / mirror / Atom feed
From: rric@kernel.org (Robert Richter)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH 2/4] irqchip, gicv3: Add HW revision detection and configuration
Date: Tue, 30 Jun 2015 16:14:01 +0200	[thread overview]
Message-ID: <1435673643-31676-3-git-send-email-rric@kernel.org> (raw)
In-Reply-To: <1435673643-31676-1-git-send-email-rric@kernel.org>

From: Robert Richter <rrichter@cavium.com>

Some GIC revisions require an individual configuration to esp. add
workarounds for HW bugs. This patch implements generic code to parse
the hw revision provided by an IIDR register value and runs specific
code if hw matches. There are functions that read the IIDR registers
for GICV3 and ITS (GICD_IIDR/GITS_IIDR) and then go through a list of
init functions to be called for specific versions.

The patch is needed to implement workarounds for HW errata in Cavium's
ThunderX GICV3.

Signed-off-by: Robert Richter <rrichter@cavium.com>
---
 drivers/irqchip/irq-gic-common.c | 11 +++++++++++
 drivers/irqchip/irq-gic-common.h |  9 +++++++++
 drivers/irqchip/irq-gic-v3-its.c | 15 +++++++++++++++
 drivers/irqchip/irq-gic-v3.c     | 14 ++++++++++++++
 4 files changed, 49 insertions(+)

diff --git a/drivers/irqchip/irq-gic-common.c b/drivers/irqchip/irq-gic-common.c
index ad96ebb0c7ab..27ad9bef760f 100644
--- a/drivers/irqchip/irq-gic-common.c
+++ b/drivers/irqchip/irq-gic-common.c
@@ -21,6 +21,17 @@
 
 #include "irq-gic-common.h"
 
+void gic_check_capabilities(u32 iidr, const struct gic_capabilities *cap,
+			void *data)
+{
+	for (; cap->desc; cap++) {
+		if ((iidr & cap->mask) != cap->id)
+			continue;
+		cap->init(data);
+		pr_info("%s\n", cap->desc);
+	}
+}
+
 int gic_configure_irq(unsigned int irq, unsigned int type,
 		       void __iomem *base, void (*sync_access)(void))
 {
diff --git a/drivers/irqchip/irq-gic-common.h b/drivers/irqchip/irq-gic-common.h
index 35a9884778bd..90d55b97c0df 100644
--- a/drivers/irqchip/irq-gic-common.h
+++ b/drivers/irqchip/irq-gic-common.h
@@ -20,10 +20,19 @@
 #include <linux/of.h>
 #include <linux/irqdomain.h>
 
+struct gic_capabilities {
+	const char *desc;
+	void (*init)(void *data);
+	u32 id;
+	u32 mask;
+};
+
 int gic_configure_irq(unsigned int irq, unsigned int type,
                        void __iomem *base, void (*sync_access)(void));
 void gic_dist_config(void __iomem *base, int gic_irqs,
 		     void (*sync_access)(void));
 void gic_cpu_config(void __iomem *base, void (*sync_access)(void));
+void gic_check_capabilities(u32 iidr, const struct gic_capabilities *cap,
+			void *data);
 
 #endif /* _IRQ_GIC_COMMON_H */
diff --git a/drivers/irqchip/irq-gic-v3-its.c b/drivers/irqchip/irq-gic-v3-its.c
index c5ce21277920..de2fc82bba83 100644
--- a/drivers/irqchip/irq-gic-v3-its.c
+++ b/drivers/irqchip/irq-gic-v3-its.c
@@ -36,6 +36,7 @@
 #include <asm/cputype.h>
 #include <asm/exception.h>
 
+#include "irq-gic-common.h"
 #include "irqchip.h"
 
 #define ITS_FLAGS_CMDQ_NEEDS_FLUSHING		(1 << 0)
@@ -1381,6 +1382,18 @@ static int its_force_quiescent(void __iomem *base)
 	}
 }
 
+static const struct gic_capabilities its_errata[] = {
+	{
+	}
+};
+
+static void its_check_capabilities(struct its_node *its)
+{
+	u32 iidr = readl_relaxed(its->base + GITS_IIDR);
+
+	gic_check_capabilities(iidr, its_errata, its);
+}
+
 static int its_probe(struct device_node *node, struct irq_domain *parent)
 {
 	struct resource res;
@@ -1439,6 +1452,8 @@ static int its_probe(struct device_node *node, struct irq_domain *parent)
 	}
 	its->cmd_write = its->cmd_base;
 
+	its_check_capabilities(its);
+
 	err = its_alloc_tables(its);
 	if (err)
 		goto out_free_cmd;
diff --git a/drivers/irqchip/irq-gic-v3.c b/drivers/irqchip/irq-gic-v3.c
index 49875adb6b44..f4bafc69cc18 100644
--- a/drivers/irqchip/irq-gic-v3.c
+++ b/drivers/irqchip/irq-gic-v3.c
@@ -765,6 +765,18 @@ static const struct irq_domain_ops gic_irq_domain_ops = {
 	.free = gic_irq_domain_free,
 };
 
+static const struct gic_capabilities gicv3_errata[] = {
+	{
+	}
+};
+
+static void gicv3_check_capabilities(void)
+{
+	u32 iidr = readl_relaxed(gic_data.dist_base + GICD_IIDR);
+
+	gic_check_capabilities(iidr, gicv3_errata, NULL);
+}
+
 static int __init gic_of_init(struct device_node *node, struct device_node *parent)
 {
 	void __iomem *dist_base;
@@ -824,6 +836,8 @@ static int __init gic_of_init(struct device_node *node, struct device_node *pare
 	gic_data.nr_redist_regions = nr_redist_regions;
 	gic_data.redist_stride = redist_stride;
 
+	gicv3_check_capabilities();
+
 	/*
 	 * Find out how many interrupts are supported.
 	 * The GIC only supports up to 1020 interrupt sources (SGI+PPI+SPI)
-- 
2.1.1

  parent reply	other threads:[~2015-06-30 14:14 UTC|newest]

Thread overview: 14+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2015-06-30 14:13 [PATCH 0/4] irqchip, gicv3: Implement Cavium ThunderX errata Robert Richter
2015-06-30 14:14 ` [PATCH 1/4] irqchip, gicv3-its: Read typer register outside the loop Robert Richter
2015-07-06 12:10   ` Marc Zyngier
2015-06-30 14:14 ` Robert Richter [this message]
2015-06-30 14:14 ` [PATCH 3/4] irqchip, gicv3: Implement Cavium ThunderX erratum 23154 Robert Richter
2015-07-06 10:43   ` Marc Zyngier
2015-07-08 10:28     ` Robert Richter
2015-07-08 10:44       ` Marc Zyngier
2015-07-06 10:48   ` Russell King - ARM Linux
2015-07-07  9:55     ` Robert Richter
2015-06-30 14:14 ` [PATCH 4/4] irqchip, gicv3-its: Implement Cavium ThunderX errata 22375, 24313 Robert Richter
2015-07-01 13:36   ` Pavel Fedin
2015-07-01 15:18     ` Marc Zyngier
2015-07-02  6:45       ` Pavel Fedin

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1435673643-31676-3-git-send-email-rric@kernel.org \
    --to=rric@kernel.org \
    --cc=linux-arm-kernel@lists.infradead.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).