From mboxrd@z Thu Jan 1 00:00:00 1970 From: acourbot@nvidia.com (Alexandre Courbot) Date: Wed, 1 Jul 2015 18:13:46 +0900 Subject: [PATCH 2/4] ARM: tegra: venice2: Add GK20A GPU DT node In-Reply-To: <1435742028-8237-1-git-send-email-acourbot@nvidia.com> References: <1435742028-8237-1-git-send-email-acourbot@nvidia.com> Message-ID: <1435742028-8237-3-git-send-email-acourbot@nvidia.com> To: linux-arm-kernel@lists.infradead.org List-Id: linux-arm-kernel.lists.infradead.org From: Thierry Reding Add the device-tree node for the GK20A GPU and leave it disabled. It is the responsability of the bootloader to enable it if the VPR registers have been programmed such as the GPU can operate. Signed-off-by: Thierry Reding Signed-off-by: Alexandre Courbot --- arch/arm/boot/dts/tegra124-venice2.dts | 10 +++++++++- 1 file changed, 9 insertions(+), 1 deletion(-) diff --git a/arch/arm/boot/dts/tegra124-venice2.dts b/arch/arm/boot/dts/tegra124-venice2.dts index 5c3f7813360d..497a50ebfe44 100644 --- a/arch/arm/boot/dts/tegra124-venice2.dts +++ b/arch/arm/boot/dts/tegra124-venice2.dts @@ -43,6 +43,14 @@ }; }; + gpu at 0,57000000 { + /* + * Node left disabled on purpose - the bootloader will enable + * it after having set the VPR up + */ + vdd-supply = <&vdd_gpu>; + }; + pinmux: pinmux at 0,70000868 { pinctrl-names = "boot"; pinctrl-0 = <&pinmux_boot>; @@ -735,7 +743,7 @@ regulator-always-on; }; - sd6 { + vdd_gpu: sd6 { regulator-name = "+VDD_GPU_AP"; regulator-min-microvolt = <650000>; regulator-max-microvolt = <1200000>; -- 2.4.4