From: eric.auger@linaro.org (Eric Auger)
To: linux-arm-kernel@lists.infradead.org
Subject: [RFC 02/17] VFIO: platform: single handler using function pointer
Date: Thu, 2 Jul 2015 15:17:12 +0200 [thread overview]
Message-ID: <1435843047-6327-3-git-send-email-eric.auger@linaro.org> (raw)
In-Reply-To: <1435843047-6327-1-git-send-email-eric.auger@linaro.org>
A single handler now is registered whatever the use case: automasked
or not. A function pointer is set according to the wished behavior
and the handler calls this function.
The irq lock is taken/released in the root handler. eventfd_signal can
be called in regions not allowed to sleep.
Signed-off-by: Eric Auger <eric.auger@linaro.org>
---
v4: creation
---
drivers/vfio/platform/vfio_platform_irq.c | 21 +++++++++++++++------
drivers/vfio/platform/vfio_platform_private.h | 1 +
2 files changed, 16 insertions(+), 6 deletions(-)
diff --git a/drivers/vfio/platform/vfio_platform_irq.c b/drivers/vfio/platform/vfio_platform_irq.c
index 132bb3f..8eb65c1 100644
--- a/drivers/vfio/platform/vfio_platform_irq.c
+++ b/drivers/vfio/platform/vfio_platform_irq.c
@@ -147,11 +147,8 @@ static int vfio_platform_set_irq_unmask(struct vfio_platform_device *vdev,
static irqreturn_t vfio_automasked_irq_handler(int irq, void *dev_id)
{
struct vfio_platform_irq *irq_ctx = dev_id;
- unsigned long flags;
int ret = IRQ_NONE;
- spin_lock_irqsave(&irq_ctx->lock, flags);
-
if (!irq_ctx->masked) {
ret = IRQ_HANDLED;
@@ -160,8 +157,6 @@ static irqreturn_t vfio_automasked_irq_handler(int irq, void *dev_id)
irq_ctx->masked = true;
}
- spin_unlock_irqrestore(&irq_ctx->lock, flags);
-
if (ret == IRQ_HANDLED)
eventfd_signal(irq_ctx->trigger, 1);
@@ -177,6 +172,19 @@ static irqreturn_t vfio_irq_handler(int irq, void *dev_id)
return IRQ_HANDLED;
}
+static irqreturn_t vfio_handler(int irq, void *dev_id)
+{
+ struct vfio_platform_irq *irq_ctx = dev_id;
+ unsigned long flags;
+ irqreturn_t ret;
+
+ spin_lock_irqsave(&irq_ctx->lock, flags);
+ ret = irq_ctx->handler(irq, dev_id);
+ spin_unlock_irqrestore(&irq_ctx->lock, flags);
+
+ return ret;
+}
+
static int vfio_set_trigger(struct vfio_platform_device *vdev, int index,
int fd, irq_handler_t handler)
{
@@ -206,9 +214,10 @@ static int vfio_set_trigger(struct vfio_platform_device *vdev, int index,
}
irq->trigger = trigger;
+ irq->handler = handler;
irq_set_status_flags(irq->hwirq, IRQ_NOAUTOEN);
- ret = request_irq(irq->hwirq, handler, 0, irq->name, irq);
+ ret = request_irq(irq->hwirq, vfio_handler, 0, irq->name, irq);
if (ret) {
kfree(irq->name);
eventfd_ctx_put(trigger);
diff --git a/drivers/vfio/platform/vfio_platform_private.h b/drivers/vfio/platform/vfio_platform_private.h
index 1c9b3d5..413f575 100644
--- a/drivers/vfio/platform/vfio_platform_private.h
+++ b/drivers/vfio/platform/vfio_platform_private.h
@@ -37,6 +37,7 @@ struct vfio_platform_irq {
spinlock_t lock;
struct virqfd *unmask;
struct virqfd *mask;
+ irqreturn_t (*handler)(int irq, void *dev_id);
};
struct vfio_platform_region {
--
1.9.1
next prev parent reply other threads:[~2015-07-02 13:17 UTC|newest]
Thread overview: 42+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-07-02 13:17 [RFC 00/17] ARM IRQ forward control based on IRQ bypass manager Eric Auger
2015-07-02 13:17 ` [RFC 01/17] VFIO: platform: test forwarded state when selecting IRQ handler Eric Auger
2015-07-02 13:17 ` Eric Auger [this message]
2015-07-02 13:17 ` [RFC 03/17] VFIO: Introduce vfio_device_external_ops Eric Auger
2015-07-02 13:17 ` [RFC 04/17] VFIO: pci: initialize vfio_device_external_ops Eric Auger
2015-07-02 13:17 ` [RFC 05/17] VFIO: platform: implement vfio_device_external_ops callbacks Eric Auger
2015-07-02 13:17 ` [RFC 06/17] VFIO: add vfio_external_{mask|is_active|set_automasked} Eric Auger
2015-07-02 13:17 ` [RFC 07/17] KVM: arm: rename pause into power_off Eric Auger
2015-07-02 13:17 ` [RFC 08/17] kvm: arm/arm64: implement kvm_arm_[halt,resume]_guest Eric Auger
2015-07-03 11:55 ` [RFC 08/17] kvm: arm/arm64: implement kvm_arm_[halt, resume]_guest Eric Auger
2015-07-03 12:14 ` Marc Zyngier
2015-07-02 13:17 ` [RFC 09/17] bypass: IRQ bypass manager proto by Alex Eric Auger
2015-07-03 2:16 ` Wu, Feng
2015-07-03 5:32 ` Eric Auger
2015-07-02 13:17 ` [RFC 10/17] KVM: arm: select IRQ_BYPASS_MANAGER Eric Auger
2015-07-02 13:17 ` [RFC 11/17] VFIO: platform: " Eric Auger
2015-07-02 13:17 ` [RFC 12/17] irq: bypass: Extend skeleton for ARM forwarding control Eric Auger
2015-07-02 13:40 ` Paolo Bonzini
2015-07-03 2:19 ` Wu, Feng
2015-07-03 2:24 ` Wu, Feng
2015-07-03 6:54 ` Eric Auger
2015-07-03 7:02 ` Paolo Bonzini
2015-07-03 13:12 ` Eric Auger
2015-07-03 17:20 ` Paolo Bonzini
2015-07-03 17:23 ` Eric Auger
2015-07-03 2:43 ` Wu, Feng
2015-07-03 6:52 ` Paolo Bonzini
2015-07-03 7:00 ` Wu, Feng
2015-07-03 7:06 ` Paolo Bonzini
2015-07-03 7:16 ` Wu, Feng
2015-07-03 7:08 ` Paolo Bonzini
2015-07-02 13:17 ` [RFC 13/17] KVM: introduce kvm_arch functions for IRQ bypass Eric Auger
2015-07-02 13:41 ` Paolo Bonzini
2015-07-02 13:17 ` [RFC 14/17] KVM: arm/arm64: vgic: forwarding control Eric Auger
2015-07-02 13:17 ` [RFC 15/17] KVM: arm/arm64: implement IRQ bypass consumer functions Eric Auger
2015-07-02 13:17 ` [RFC 16/17] KVM: eventfd: add irq bypass consumer management Eric Auger
2015-07-02 13:42 ` Paolo Bonzini
2015-07-02 13:53 ` Eric Auger
2015-07-06 7:55 ` Wu, Feng
2015-07-06 11:19 ` Eric Auger
2015-07-06 12:17 ` Wu, Feng
2015-07-02 13:17 ` [RFC 17/17] VFIO: platform: add irq bypass producer management Eric Auger
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1435843047-6327-3-git-send-email-eric.auger@linaro.org \
--to=eric.auger@linaro.org \
--cc=linux-arm-kernel@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).