linux-arm-kernel.lists.infradead.org archive mirror
 help / color / mirror / Atom feed
From: daniel.thompson@linaro.org (Daniel Thompson)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH 4.2-rc1 v21 0/6] irq/arm: Implement arch_trigger_all_cpu_backtrace
Date: Mon,  6 Jul 2015 14:13:52 +0100	[thread overview]
Message-ID: <1436188438-9478-1-git-send-email-daniel.thompson@linaro.org> (raw)

This patchset modifies the GIC driver to allow it, on supported
platforms, to route IPI interrupts to FIQ. It then uses this
feature to implement arch_trigger_all_cpu_backtrace for arm.
In order to neatly deliver the changes for the arm we also
rearrange some of the existing x86 NMI code to make it architecture
neutral.

The patches have been runtime tested on both a system capable of
supporting FIQ (Freescale i.MX6) and one that cannot (Qualcomm
Snapdragon 600). In addition older versions of this patchset
have been tested on STiH416 and vexpress-a9. The changes to the x86
logic were tested using qemu.

v21:

* Change the way SGIs are raised to try to increase robustness starting
  secondary cores. This is a theoretic fix for a regression reported
  by Mark Rutland on vexpress-tc2 but it also allows us to remove
  igroup0_shadow entirely since it is no longer needed.

* Fix a couple of variable names and add comments to describe the
  hardware behavior better (Mark Rutland).

* Improved MULTI_IRQ_HANDLER support by clearing FIQs using
  handle_arch_irq (Marc Zygnier).

* Fix gic_cpu_if_down() to ensure group 1 interrupts are disabled
  then the interface is brought down.

For changes in v20 and earlier see:
  http://thread.gmane.org/gmane.linux.kernel/1928465


Daniel Thompson (6):
  irqchip: gic: Optimize locking in gic_raise_softirq
  irqchip: gic: Make gic_raise_softirq FIQ-safe
  irqchip: gic: Introduce plumbing for IPI FIQ
  printk: Simple implementation for NMI backtracing
  x86/nmi: Use common printk functions
  ARM: Add support for on-demand backtrace of other CPUs

 arch/arm/Kconfig                |   1 +
 arch/arm/include/asm/hardirq.h  |   2 +-
 arch/arm/include/asm/irq.h      |   5 +
 arch/arm/include/asm/smp.h      |   3 +
 arch/arm/kernel/smp.c           |  82 +++++++++++++++
 arch/arm/kernel/traps.c         |  13 ++-
 arch/x86/Kconfig                |   1 +
 arch/x86/kernel/apic/hw_nmi.c   | 104 ++-----------------
 drivers/irqchip/irq-gic.c       | 220 +++++++++++++++++++++++++++++++++++++---
 include/linux/irqchip/arm-gic.h |   6 ++
 include/linux/printk.h          |  20 ++++
 init/Kconfig                    |   3 +
 kernel/printk/Makefile          |   1 +
 kernel/printk/nmi_backtrace.c   | 147 +++++++++++++++++++++++++++
 14 files changed, 495 insertions(+), 113 deletions(-)
 create mode 100644 kernel/printk/nmi_backtrace.c

--
2.4.3

             reply	other threads:[~2015-07-06 13:13 UTC|newest]

Thread overview: 18+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2015-07-06 13:13 Daniel Thompson [this message]
2015-07-06 13:13 ` [PATCH 4.2-rc1 v21 1/6] irqchip: gic: Optimize locking in gic_raise_softirq Daniel Thompson
2015-07-06 13:13 ` [PATCH 4.2-rc1 v21 2/6] irqchip: gic: Make gic_raise_softirq FIQ-safe Daniel Thompson
2015-07-06 13:13 ` [PATCH 4.2-rc1 v21 3/6] irqchip: gic: Introduce plumbing for IPI FIQ Daniel Thompson
2015-07-07 10:05   ` Holger Schurig
2015-07-06 13:13 ` [PATCH 4.2-rc1 v21 4/6] printk: Simple implementation for NMI backtracing Daniel Thompson
2015-07-06 13:13 ` [PATCH 4.2-rc1 v21 5/6] x86/nmi: Use common printk functions Daniel Thompson
2015-07-06 13:13 ` [PATCH 4.2-rc1 v21 6/6] ARM: Add support for on-demand backtrace of other CPUs Daniel Thompson
2016-06-30 14:57 ` [PATCH 4.7-rc3 v23 0/4] irq/arm: Use FIQ for NMI backtrace (when possible) Daniel Thompson
2016-06-30 14:57   ` [PATCH 4.7-rc3 v23 1/4] irqchip: gic: Optimize locking in gic_raise_softirq Daniel Thompson
2016-06-30 14:57   ` [PATCH 4.7-rc3 v23 2/4] irqchip: gic: Make gic_raise_softirq FIQ-safe Daniel Thompson
2016-06-30 14:57   ` [PATCH 4.7-rc3 v23 3/4] irqchip: gic: Introduce plumbing for IPI FIQ Daniel Thompson
2016-06-30 14:57   ` [PATCH 4.7-rc3 v23 4/4] ARM: Allow IPI_CPU_BACKTRACE to exploit FIQ Daniel Thompson
2016-08-11 11:55 ` [PATCH 4.8-rc1 v23 0/4] irq/arm: Use FIQ for NMI backtrace (when possible) Daniel Thompson
2016-08-11 11:55   ` [PATCH 4.8-rc1 v23 1/4] irqchip: gic: Optimize locking in gic_raise_softirq Daniel Thompson
2016-08-11 11:55   ` [PATCH 4.8-rc1 v23 2/4] irqchip: gic: Make gic_raise_softirq FIQ-safe Daniel Thompson
2016-08-11 11:55   ` [PATCH 4.8-rc1 v23 3/4] irqchip: gic: Introduce plumbing for IPI FIQ Daniel Thompson
2016-08-11 11:55   ` [PATCH 4.8-rc1 v23 4/4] ARM: Allow IPI_CPU_BACKTRACE to exploit FIQ Daniel Thompson

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1436188438-9478-1-git-send-email-daniel.thompson@linaro.org \
    --to=daniel.thompson@linaro.org \
    --cc=linux-arm-kernel@lists.infradead.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).