linux-arm-kernel.lists.infradead.org archive mirror
 help / color / mirror / Atom feed
From: jszhang@marvell.com (Jisheng Zhang)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH v3 2/3] ARM: cpuidle: refine cpuidle_ops member's parameters.
Date: Thu, 9 Jul 2015 16:31:24 +0800	[thread overview]
Message-ID: <1436430685-2202-3-git-send-email-jszhang@marvell.com> (raw)
In-Reply-To: <1436430685-2202-1-git-send-email-jszhang@marvell.com>

As for the suspend member function, the to-be-suspended cpu is always
the calling cpu itself, so the 'cpu' parameter may not be necessary, let
driver get 'cpu' itself if need.

As for the init member function, the device_node here may not be
necessary either, because we can get the node via. of_get_cpu_node().

Signed-off-by: Jisheng Zhang <jszhang@marvell.com>
---
 arch/arm/include/asm/cpuidle.h |  6 +++---
 arch/arm/kernel/cpuidle.c      |  8 ++++----
 drivers/soc/qcom/spm.c         | 17 ++++++++++++-----
 3 files changed, 19 insertions(+), 12 deletions(-)

diff --git a/arch/arm/include/asm/cpuidle.h b/arch/arm/include/asm/cpuidle.h
index 0f84249..ca5dfe6 100644
--- a/arch/arm/include/asm/cpuidle.h
+++ b/arch/arm/include/asm/cpuidle.h
@@ -30,8 +30,8 @@ static inline int arm_cpuidle_simple_enter(struct cpuidle_device *dev,
 struct device_node;
 
 struct cpuidle_ops {
-	int (*suspend)(int cpu, unsigned long arg);
-	int (*init)(struct device_node *, int cpu);
+	int (*suspend)(unsigned long arg);
+	int (*init)(unsigned int cpu);
 };
 
 struct of_cpuidle_method {
@@ -46,6 +46,6 @@ struct of_cpuidle_method {
 
 extern int arm_cpuidle_suspend(int index);
 
-extern int arm_cpuidle_init(int cpu);
+extern int arm_cpuidle_init(unsigned int cpu);
 
 #endif
diff --git a/arch/arm/kernel/cpuidle.c b/arch/arm/kernel/cpuidle.c
index 318da33..7bc7bc6 100644
--- a/arch/arm/kernel/cpuidle.c
+++ b/arch/arm/kernel/cpuidle.c
@@ -53,10 +53,10 @@ int arm_cpuidle_simple_enter(struct cpuidle_device *dev,
 int arm_cpuidle_suspend(int index)
 {
 	int ret = -EOPNOTSUPP;
-	int cpu = smp_processor_id();
+	unsigned int cpu = smp_processor_id();
 
 	if (cpuidle_ops[cpu].suspend)
-		ret = cpuidle_ops[cpu].suspend(cpu, index);
+		ret = cpuidle_ops[cpu].suspend(index);
 
 	return ret;
 }
@@ -134,7 +134,7 @@ static int __init arm_cpuidle_read_ops(struct device_node *dn, int cpu)
  *  -ENXIO if the HW reports a failure or a misconfiguration,
  *  -ENOMEM if the HW report an memory allocation failure 
  */
-int __init arm_cpuidle_init(int cpu)
+int __init arm_cpuidle_init(unsigned int cpu)
 {
 	struct device_node *cpu_node = of_cpu_device_node_get(cpu);
 	int ret;
@@ -144,7 +144,7 @@ int __init arm_cpuidle_init(int cpu)
 
 	ret = arm_cpuidle_read_ops(cpu_node, cpu);
 	if (!ret && cpuidle_ops[cpu].init)
-		ret = cpuidle_ops[cpu].init(cpu_node, cpu);
+		ret = cpuidle_ops[cpu].init(cpu);
 
 	of_node_put(cpu_node);
 
diff --git a/drivers/soc/qcom/spm.c b/drivers/soc/qcom/spm.c
index b04b05a..1649ec3 100644
--- a/drivers/soc/qcom/spm.c
+++ b/drivers/soc/qcom/spm.c
@@ -116,7 +116,7 @@ static const struct spm_reg_data spm_reg_8064_cpu = {
 
 static DEFINE_PER_CPU(struct spm_driver_data *, cpu_spm_drv);
 
-typedef int (*idle_fn)(int);
+typedef int (*idle_fn)(void);
 static DEFINE_PER_CPU(idle_fn*, qcom_idle_ops);
 
 static inline void spm_register_write(struct spm_driver_data *drv,
@@ -179,9 +179,10 @@ static int qcom_pm_collapse(unsigned long int unused)
 	return -1;
 }
 
-static int qcom_cpu_spc(int cpu)
+static int qcom_cpu_spc(void)
 {
 	int ret;
+	int cpu = smp_processor_id();
 	struct spm_driver_data *drv = per_cpu(cpu_spm_drv, cpu);
 
 	spm_set_low_power_mode(drv, PM_SLEEP_MODE_SPC);
@@ -197,9 +198,11 @@ static int qcom_cpu_spc(int cpu)
 	return ret;
 }
 
-static int qcom_idle_enter(int cpu, unsigned long index)
+static int qcom_idle_enter(unsigned long index)
 {
-	return per_cpu(qcom_idle_ops, cpu)[index](cpu);
+	unsigned int cpu = smp_processor_id();
+
+	return per_cpu(qcom_idle_ops, cpu)[index]();
 }
 
 static const struct of_device_id qcom_idle_state_match[] __initconst = {
@@ -207,7 +210,7 @@ static const struct of_device_id qcom_idle_state_match[] __initconst = {
 	{ },
 };
 
-static int __init qcom_cpuidle_init(struct device_node *cpu_node, int cpu)
+static int __init qcom_cpuidle_init(unsigned int cpu)
 {
 	const struct of_device_id *match_id;
 	struct device_node *state_node;
@@ -217,6 +220,10 @@ static int __init qcom_cpuidle_init(struct device_node *cpu_node, int cpu)
 	idle_fn *fns;
 	cpumask_t mask;
 	bool use_scm_power_down = false;
+	struct device_node *cpu_node = of_get_cpu_node(cpu, NULL);
+
+	if (!cpu_node)
+		return -ENODEV;
 
 	for (i = 0; ; i++) {
 		state_node = of_parse_phandle(cpu_node, "cpu-idle-states", i);
-- 
2.1.4

  parent reply	other threads:[~2015-07-09  8:31 UTC|newest]

Thread overview: 21+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2015-07-09  8:31 [PATCH v3 0/3] arm: kernel: implement cpuidle_ops with psci backend Jisheng Zhang
2015-07-09  8:31 ` [PATCH v3 1/3] firmware: psci: move cpu_suspend handling to generic code Jisheng Zhang
2015-07-09  8:31 ` Jisheng Zhang [this message]
2015-07-09  8:43   ` [PATCH v3 2/3] ARM: cpuidle: refine cpuidle_ops member's parameters Jisheng Zhang
2015-07-09  9:28     ` Lorenzo Pieralisi
2015-07-10 15:07       ` Lina Iyer
2015-07-10 17:37   ` Lina Iyer
2015-07-09  8:31 ` [PATCH v3 3/3] arm: kernel: implement cpuidle_ops with psci backend Jisheng Zhang
2015-07-14 10:34   ` Russell King - ARM Linux
2015-07-14 11:03     ` Lorenzo Pieralisi
2015-07-14 12:29       ` Russell King - ARM Linux
2015-07-14 14:55         ` Lorenzo Pieralisi
2015-07-14 20:41           ` Russell King - ARM Linux
2015-07-15 13:46             ` Lorenzo Pieralisi
2015-07-15 14:45               ` Russell King - ARM Linux
2015-07-15 15:40                 ` Lorenzo Pieralisi
2015-07-26 21:45                   ` Russell King - ARM Linux
2015-07-27  9:16                     ` Lorenzo Pieralisi
2015-07-27  9:45                       ` Russell King - ARM Linux
2015-07-27 10:01                         ` Lorenzo Pieralisi
2015-07-27 10:09                           ` Russell King - ARM Linux

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1436430685-2202-3-git-send-email-jszhang@marvell.com \
    --to=jszhang@marvell.com \
    --cc=linux-arm-kernel@lists.infradead.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).