From: josh.wu@atmel.com (Josh Wu)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH 1/2] power: reset: at91: add sama5d3 reset function
Date: Thu, 9 Jul 2015 18:15:46 +0800 [thread overview]
Message-ID: <1436436947-11210-1-git-send-email-josh.wu@atmel.com> (raw)
As since sama5d3, to reset the chip, we don't need to shutdown the ddr
controller.
So add a new compatible string and new restart function for sama5d3 and
later chips. As we don't use sama5d3 ddr controller, so remove it as
well.
Signed-off-by: Josh Wu <josh.wu@atmel.com>
Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com>
---
drivers/power/reset/at91-reset.c | 30 +++++++++++++++++++++---------
1 file changed, 21 insertions(+), 9 deletions(-)
diff --git a/drivers/power/reset/at91-reset.c b/drivers/power/reset/at91-reset.c
index 36dc52f..8944b63 100644
--- a/drivers/power/reset/at91-reset.c
+++ b/drivers/power/reset/at91-reset.c
@@ -123,6 +123,14 @@ static int at91sam9g45_restart(struct notifier_block *this, unsigned long mode,
return NOTIFY_DONE;
}
+static int sama5d3_restart(struct notifier_block *this, unsigned long mode,
+ void *cmd)
+{
+ writel(cpu_to_le32(AT91_RSTC_KEY | AT91_RSTC_PERRST | AT91_RSTC_PROCRST),
+ at91_rstc_base);
+ return NOTIFY_DONE;
+}
+
static void __init at91_reset_status(struct platform_device *pdev)
{
u32 reg = readl(at91_rstc_base + AT91_RSTC_SR);
@@ -155,13 +163,13 @@ static void __init at91_reset_status(struct platform_device *pdev)
static const struct of_device_id at91_ramc_of_match[] = {
{ .compatible = "atmel,at91sam9260-sdramc", },
{ .compatible = "atmel,at91sam9g45-ddramc", },
- { .compatible = "atmel,sama5d3-ddramc", },
{ /* sentinel */ }
};
static const struct of_device_id at91_reset_of_match[] = {
{ .compatible = "atmel,at91sam9260-rstc", .data = at91sam9260_restart },
{ .compatible = "atmel,at91sam9g45-rstc", .data = at91sam9g45_restart },
+ { .compatible = "atmel,sama5d3-rstc", .data = sama5d3_restart },
{ /* sentinel */ }
};
@@ -181,17 +189,21 @@ static int at91_reset_of_probe(struct platform_device *pdev)
return -ENODEV;
}
- for_each_matching_node(np, at91_ramc_of_match) {
- at91_ramc_base[idx] = of_iomap(np, 0);
- if (!at91_ramc_base[idx]) {
- dev_err(&pdev->dev, "Could not map ram controller address\n");
- return -ENODEV;
+ match = of_match_node(at91_reset_of_match, pdev->dev.of_node);
+ at91_restart_nb.notifier_call = match->data;
+
+ if (match->data != sama5d3_restart) {
+ /* we need to shutdown the ddr controller, so get ramc base */
+ for_each_matching_node(np, at91_ramc_of_match) {
+ at91_ramc_base[idx] = of_iomap(np, 0);
+ if (!at91_ramc_base[idx]) {
+ dev_err(&pdev->dev, "Could not map ram controller address\n");
+ return -ENODEV;
+ }
+ idx++;
}
- idx++;
}
- match = of_match_node(at91_reset_of_match, pdev->dev.of_node);
- at91_restart_nb.notifier_call = match->data;
return register_restart_handler(&at91_restart_nb);
}
--
1.9.1
next reply other threads:[~2015-07-09 10:15 UTC|newest]
Thread overview: 26+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-07-09 10:15 Josh Wu [this message]
2015-07-09 10:15 ` [PATCH 2/2] ARM: at91: sama5/dt: update rstc to correct compatible string Josh Wu
2015-07-09 12:03 ` [PATCH 1/2] power: reset: at91: add sama5d3 reset function Maxime Ripard
2015-07-09 12:46 ` Nicolas Ferre
2015-07-10 3:06 ` Josh Wu
2015-07-10 6:54 ` Maxime Ripard
2015-07-10 7:59 ` Josh Wu
2015-07-09 17:37 ` Guenter Roeck
2015-07-10 1:59 ` Josh Wu
2015-07-10 3:14 ` Guenter Roeck
2015-07-10 3:52 ` Josh Wu
2015-07-10 5:56 ` Alexandre Belloni
2015-07-10 17:01 ` Guenter
2015-07-10 6:03 ` Alexandre Belloni
2015-07-10 6:58 ` Maxime Ripard
2015-07-10 7:56 ` Josh Wu
2015-07-10 12:09 ` Alexandre Belloni
2015-07-10 12:31 ` Maxime Ripard
2015-07-10 12:46 ` Alexandre Belloni
2015-07-10 16:12 ` Nicolas Ferre
2015-07-13 3:21 ` Josh Wu
2015-07-20 7:52 ` Maxime Ripard
2015-07-20 8:35 ` Josh Wu
2015-07-20 8:38 ` Nicolas Ferre
2015-07-20 8:44 ` Josh Wu
2015-07-20 9:13 ` Josh Wu
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1436436947-11210-1-git-send-email-josh.wu@atmel.com \
--to=josh.wu@atmel.com \
--cc=linux-arm-kernel@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).