From mboxrd@z Thu Jan 1 00:00:00 1970 From: vaibhav.hiremath@linaro.org (Vaibhav Hiremath) Date: Thu, 9 Jul 2015 17:17:08 +0530 Subject: [PATCH 3/6] mfd: devicetree: bindings: 88pm800: Add DT property for 32KHz output enable In-Reply-To: <1436442431-3471-1-git-send-email-vaibhav.hiremath@linaro.org> References: <1436442431-3471-1-git-send-email-vaibhav.hiremath@linaro.org> Message-ID: <1436442431-3471-4-git-send-email-vaibhav.hiremath@linaro.org> To: linux-arm-kernel@lists.infradead.org List-Id: linux-arm-kernel.lists.infradead.org 88PM800 family of device supports output of 32KHz clock (low jitter) on CLK32K2/3 pin which can be supplied to other peripherals on the board. This patch adds the devicetree binding to enable this feature. Signed-off-by: Vaibhav Hiremath --- Documentation/devicetree/bindings/mfd/88pm800.txt | 6 ++++++ 1 file changed, 6 insertions(+) diff --git a/Documentation/devicetree/bindings/mfd/88pm800.txt b/Documentation/devicetree/bindings/mfd/88pm800.txt index dec842f..ae1311c 100644 --- a/Documentation/devicetree/bindings/mfd/88pm800.txt +++ b/Documentation/devicetree/bindings/mfd/88pm800.txt @@ -9,6 +9,12 @@ Required parent device properties: - #interrupt-cells : should be 1. The cell is the 88pm80x local IRQ number +Optional properties : + - marvell,88pm800-32khz-xolj-out-en : If set, driver will enable low jitter + version of 32Khz clock output on + CLK32K3 - for 88pm800 + CLK32K2 - for 88pm860 + 88pm80x family of devices consists of varied group of sub-devices: Device Supply Names Description -- 1.9.1