From mboxrd@z Thu Jan 1 00:00:00 1970 From: vaibhav.hiremath@linaro.org (Vaibhav Hiremath) Date: Thu, 9 Jul 2015 18:11:31 +0530 Subject: [PATCH 2/3] regulator: 88pm800: fix LDO vsel_mask value In-Reply-To: <1436445692-10656-1-git-send-email-vaibhav.hiremath@linaro.org> References: <1436445692-10656-1-git-send-email-vaibhav.hiremath@linaro.org> Message-ID: <1436445692-10656-3-git-send-email-vaibhav.hiremath@linaro.org> To: linux-arm-kernel@lists.infradead.org List-Id: linux-arm-kernel.lists.infradead.org From: Yi Zhang As per datasheet, Except LDO2, all other LDO's use bit [3:0] for VOUT select. Current code uses wrong mask value of 0x1f, So this patch fixes it to use 0xf. Signed-off-by: Yi Zhang [vaibhav.hiremath at linaro.org: Updated changelog with more detailed description] Signed-off-by: Vaibhav Hiremath --- drivers/regulator/88pm800.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/regulator/88pm800.c b/drivers/regulator/88pm800.c index d22a098..fdebd23 100644 --- a/drivers/regulator/88pm800.c +++ b/drivers/regulator/88pm800.c @@ -137,7 +137,7 @@ struct pm800_regulators { .owner = THIS_MODULE, \ .n_voltages = ARRAY_SIZE(ldo_volt_table), \ .vsel_reg = PM800_##vreg##_VOUT, \ - .vsel_mask = 0x1f, \ + .vsel_mask = 0xf, \ .enable_reg = PM800_##ereg, \ .enable_mask = 1 << (ebit), \ .volt_table = ldo_volt_table, \ -- 1.9.1