From: marc.zyngier@arm.com (Marc Zyngier)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH 6/6] irqchip: GIC: Don't deactivate interrupts forwarded to a guest
Date: Thu, 9 Jul 2015 14:19:11 +0100 [thread overview]
Message-ID: <1436447951-22357-7-git-send-email-marc.zyngier@arm.com> (raw)
In-Reply-To: <1436447951-22357-1-git-send-email-marc.zyngier@arm.com>
Commit 0a4377de3056 ("genirq: Introduce irq_set_vcpu_affinity() to
target an interrupt to a VCPU") added just what we needed at the
lowest level to allow an interrupt to be deactivated by a guest.
When such a request reaches the GIC, it knows it doesn't need to
perform the deactivation anymore, and can safely leave the guest
do its magic. This of course requires additional support in both
VFIO and KVM.
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
---
drivers/irqchip/irq-gic.c | 32 ++++++++++++++++++++++++++++++--
1 file changed, 30 insertions(+), 2 deletions(-)
diff --git a/drivers/irqchip/irq-gic.c b/drivers/irqchip/irq-gic.c
index 3c7f3a4..ca4074a 100644
--- a/drivers/irqchip/irq-gic.c
+++ b/drivers/irqchip/irq-gic.c
@@ -140,6 +140,11 @@ static inline unsigned int gic_irq(struct irq_data *d)
return d->hwirq;
}
+static inline bool forwarded_irq(struct irq_data *d)
+{
+ return d->handler_data != NULL;
+}
+
/*
* Routines to acknowledge, disable and enable interrupts
*/
@@ -158,6 +163,12 @@ static int gic_peek_irq(struct irq_data *d, u32 offset)
static void gic_mask_irq(struct irq_data *d)
{
gic_poke_irq(d, GIC_DIST_ENABLE_CLEAR);
+ /*
+ * When masking a forwarded interrupt, make sure it is
+ * deactivated as well.
+ */
+ if (static_key_true(&supports_deactivate) && forwarded_irq(d))
+ gic_poke_irq(d, GIC_DIST_ACTIVE_CLEAR);
}
static void gic_unmask_irq(struct irq_data *d)
@@ -167,10 +178,14 @@ static void gic_unmask_irq(struct irq_data *d)
static void gic_eoi_irq(struct irq_data *d)
{
- if (static_key_true(&supports_deactivate))
+ if (static_key_true(&supports_deactivate)) {
+ /* Do not deactivate an IRQ forwarded to a vcpu. */
+ if (forwarded_irq(d))
+ return;
writel_relaxed(gic_irq(d), gic_cpu_base(d) + GIC_CPU_DEACTIVATE);
- else
+ } else {
writel_relaxed(gic_irq(d), gic_cpu_base(d) + GIC_CPU_EOI);
+ }
}
static int gic_irq_set_irqchip_state(struct irq_data *d,
@@ -239,6 +254,18 @@ static int gic_set_type(struct irq_data *d, unsigned int type)
return gic_configure_irq(gicirq, type, base, NULL);
}
+static int gic_irq_set_vcpu_affinity(struct irq_data *d, void *vcpu)
+{
+ /* Only interrupts on the primary GIC can be forwarded to a vcpu. */
+ if (static_key_true(&supports_deactivate) &&
+ irq_data_get_irq_chip_data(d) == &gic_data[0]) {
+ d->handler_data = vcpu;
+ return 0;
+ }
+
+ return -EINVAL;
+}
+
#ifdef CONFIG_SMP
static int gic_set_affinity(struct irq_data *d, const struct cpumask *mask_val,
bool force)
@@ -334,6 +361,7 @@ static struct irq_chip gic_chip = {
#endif
.irq_get_irqchip_state = gic_irq_get_irqchip_state,
.irq_set_irqchip_state = gic_irq_set_irqchip_state,
+ .irq_set_vcpu_affinity = gic_irq_set_vcpu_affinity,
.flags = IRQCHIP_SET_TYPE_MASKED,
};
--
2.1.4
next prev parent reply other threads:[~2015-07-09 13:19 UTC|newest]
Thread overview: 28+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-07-09 13:19 [PATCH 0/6] irqchip: GICv2/v3: Add support for irq_vcpu_affinity Marc Zyngier
2015-07-09 13:19 ` [PATCH 1/6] irqchip: GICv3: Convert to EOImode == 1 Marc Zyngier
2015-08-11 9:14 ` Eric Auger
2015-08-12 12:38 ` Marc Zyngier
2015-07-09 13:19 ` [PATCH 2/6] irqchip: GIC: " Marc Zyngier
2015-08-11 9:15 ` Eric Auger
2015-08-12 13:31 ` Marc Zyngier
2015-08-12 17:40 ` Catalin Marinas
2015-07-09 13:19 ` [PATCH 3/6] irqchip: GICv3: Skip LPI deactivation Marc Zyngier
2015-08-11 9:42 ` Eric Auger
2015-08-12 13:34 ` Marc Zyngier
2015-08-12 14:28 ` Eric Auger
2015-07-09 13:19 ` [PATCH 4/6] irqchip: GIC: Use chip_data instead of handler_data for cascaded interrupts Marc Zyngier
2015-07-09 21:33 ` Thomas Gleixner
2015-07-10 7:52 ` Marc Zyngier
2015-07-10 8:17 ` Jiang Liu
2015-07-10 8:21 ` Marc Zyngier
2015-08-11 9:45 ` Eric Auger
2015-08-12 13:41 ` Marc Zyngier
2015-07-09 13:19 ` [PATCH 5/6] irqchip: GICv3: Don't deactivate interrupts forwarded to a guest Marc Zyngier
2015-08-11 10:03 ` Eric Auger
2015-08-12 14:20 ` Marc Zyngier
2015-08-12 15:09 ` Eric Auger
2015-08-12 15:40 ` Marc Zyngier
2015-08-12 15:51 ` Eric Auger
2015-07-09 13:19 ` Marc Zyngier [this message]
2015-08-11 10:06 ` [PATCH 0/6] irqchip: GICv2/v3: Add support for irq_vcpu_affinity Eric Auger
2015-08-12 14:21 ` Marc Zyngier
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1436447951-22357-7-git-send-email-marc.zyngier@arm.com \
--to=marc.zyngier@arm.com \
--cc=linux-arm-kernel@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).