[PATCH v3 0/2] RTC support for NXP LPC18xx family

[PATCH v3 0/2] RTC support for NXP LPC18xx family

[Joachim Eastwood]

This patch set adds support for the RTC found on many NXP devices
including LPC178x/18xx/408x/43xx. The RTC provides calendar and
clock functionality together with alarm interrupt support.

The driver is a rework of an old driver by Kevin Wells. It has been
modified to support modern resource allocation, device tree and
generally cleaned up. Driver was originally written to support the
LPC24xx platform but since this platform isn't upstream support has
been removed. The LPC24xx name is still kept to preserve the origin
of this hardware block.

Been a while since the last version, but this version should address
all comments from Josh and Alexandre on v2. There has also been some
rework from my side. Please have a look.

changes since v2:
 - rework hw init
 - update Kconfig text
 - remove unused registers defines
 - misc clean ups
 - rebase on 4.2-rc1

changes since v1:
 - s/lpc2k/lpc24xx for better consistency
 - fix Kconfig entry
 - drop support for old versions for the ip block

Patch set is based on Linux v4.2-rc1.

Joachim Eastwood (2):
  rtc: add rtc-lpc24xx driver
  doc: dt: add documentation for nxp,lpc1788-rtc

 .../devicetree/bindings/rtc/nxp,lpc1788-rtc.txt    |  21 ++
 drivers/rtc/Kconfig                                |  12 +
 drivers/rtc/Makefile                               |   1 +
 drivers/rtc/rtc-lpc24xx.c                          | 310 +++++++++++++++++++++
 4 files changed, 344 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/rtc/nxp,lpc1788-rtc.txt
 create mode 100644 drivers/rtc/rtc-lpc24xx.c

-- 
1.8.0

[PATCH v3 1/2] rtc: add rtc-lpc24xx driver

[Joachim Eastwood]

Add driver for the RTC found on NXP LPC178x/18xx/408x/43xx devices.
The RTC provides calendar and clock functionality together with
alarm interrupt support.

Signed-off-by: Joachim Eastwood <manabian@gmail.com>
---
 drivers/rtc/Kconfig       |  12 ++
 drivers/rtc/Makefile      |   1 +
 drivers/rtc/rtc-lpc24xx.c | 310 ++++++++++++++++++++++++++++++++++++++++++++++
 3 files changed, 323 insertions(+)
 create mode 100644 drivers/rtc/rtc-lpc24xx.c

diff --git a/drivers/rtc/Kconfig b/drivers/rtc/Kconfig
index 83b4b89b9d5a..f732e9e5bfd7 100644
--- a/drivers/rtc/Kconfig
+++ b/drivers/rtc/Kconfig
@@ -1456,6 +1456,18 @@ config RTC_DRV_JZ4740
 	  This driver can also be buillt as a module. If so, the module
 	  will be called rtc-jz4740.
 
+config RTC_DRV_LPC24XX
+	tristate "NXP RTC for LPC178x/18xx/408x/43xx"
+	depends on ARCH_LPC18XX || COMPILE_TEST
+	depends on OF && HAS_IOMEM
+	help
+	  This enables support for the NXP RTC found which can be found on
+	  NXP LPC178x/18xx/408x/43xx devices.
+
+	  If you have one of the devices above enable this driver to use
+	  the hardware RTC. This driver can also be buillt as a module. If
+	  so, the module will be called rtc-lpc24xx.
+
 config RTC_DRV_LPC32XX
 	depends on ARCH_LPC32XX
 	tristate "NXP LPC32XX RTC"
diff --git a/drivers/rtc/Makefile b/drivers/rtc/Makefile
index 1b09a62fcf4b..279738449a8d 100644
--- a/drivers/rtc/Makefile
+++ b/drivers/rtc/Makefile
@@ -74,6 +74,7 @@ obj-$(CONFIG_RTC_DRV_ISL12057)	+= rtc-isl12057.o
 obj-$(CONFIG_RTC_DRV_ISL1208)	+= rtc-isl1208.o
 obj-$(CONFIG_RTC_DRV_JZ4740)	+= rtc-jz4740.o
 obj-$(CONFIG_RTC_DRV_LP8788)	+= rtc-lp8788.o
+obj-$(CONFIG_RTC_DRV_LPC24XX)	+= rtc-lpc24xx.o
 obj-$(CONFIG_RTC_DRV_LPC32XX)	+= rtc-lpc32xx.o
 obj-$(CONFIG_RTC_DRV_LOONGSON1)	+= rtc-ls1x.o
 obj-$(CONFIG_RTC_DRV_M41T80)	+= rtc-m41t80.o
diff --git a/drivers/rtc/rtc-lpc24xx.c b/drivers/rtc/rtc-lpc24xx.c
new file mode 100644
index 000000000000..dabdfa30f3d5
--- /dev/null
+++ b/drivers/rtc/rtc-lpc24xx.c
@@ -0,0 +1,310 @@
+/*
+ * RTC driver for NXP LPC178x/18xx/43xx Real-Time Clock (RTC)
+ *
+ * Copyright (C) 2011 NXP Semiconductors
+ * Copyright (C) 2015 Joachim Eastwood <manabian@gmail.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ */
+
+#include <linux/clk.h>
+#include <linux/io.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/of_device.h>
+#include <linux/platform_device.h>
+#include <linux/rtc.h>
+
+/* LPC24xx RTC register offsets and bits */
+#define LPC24XX_ILR		0x00
+#define  LPC24XX_RTCCIF		BIT(0)
+#define  LPC24XX_RTCALF		BIT(1)
+#define LPC24XX_CTC		0x04
+#define LPC24XX_CCR		0x08
+#define  LPC24XX_CLKEN		BIT(0)
+#define  LPC178X_CCALEN		BIT(4)
+#define LPC24XX_CIIR		0x0c
+#define LPC24XX_AMR		0x10
+#define  LPC24XX_ALARM_DISABLE	0xff
+#define LPC24XX_CTIME0		0x14
+#define LPC24XX_CTIME1		0x18
+#define LPC24XX_CTIME2		0x1c
+#define LPC24XX_SEC		0x20
+#define LPC24XX_MIN		0x24
+#define LPC24XX_HOUR		0x28
+#define LPC24XX_DOM		0x2c
+#define LPC24XX_DOW		0x30
+#define LPC24XX_DOY		0x34
+#define LPC24XX_MONTH		0x38
+#define LPC24XX_YEAR		0x3c
+#define LPC24XX_ALSEC		0x60
+#define LPC24XX_ALMIN		0x64
+#define LPC24XX_ALHOUR		0x68
+#define LPC24XX_ALDOM		0x6c
+#define LPC24XX_ALDOW		0x70
+#define LPC24XX_ALDOY		0x74
+#define LPC24XX_ALMON		0x78
+#define LPC24XX_ALYEAR		0x7c
+
+/* Macros to read fields in consolidated time (CT) registers */
+#define CT0_SECS(x)		(((x) >> 0)  & 0x3f)
+#define CT0_MINS(x)		(((x) >> 8)  & 0x3f)
+#define CT0_HOURS(x)		(((x) >> 16) & 0x1f)
+#define CT0_DOW(x)		(((x) >> 24) & 0x07)
+#define CT1_DOM(x)		(((x) >> 0)  & 0x1f)
+#define CT1_MONTH(x)		(((x) >> 8)  & 0x0f)
+#define CT1_YEAR(x)		(((x) >> 16) & 0xfff)
+#define CT2_DOY(x)		(((x) >> 0)  & 0xfff)
+
+#define rtc_readl(dev, reg)		readl((dev)->rtc_base + (reg))
+#define rtc_writel(dev, reg, val)	writel((val), (dev)->rtc_base + (reg))
+
+struct lpc24xx_rtc {
+	void __iomem *rtc_base;
+	struct rtc_device *rtc;
+	struct clk *clk_rtc;
+	struct clk *clk_reg;
+};
+
+static int lpc24xx_rtc_set_time(struct device *dev, struct rtc_time *tm)
+{
+	struct lpc24xx_rtc *rtc = dev_get_drvdata(dev);
+
+	/* Disable RTC during update */
+	rtc_writel(rtc, LPC24XX_CCR, LPC178X_CCALEN);
+
+	rtc_writel(rtc, LPC24XX_SEC,	tm->tm_sec);
+	rtc_writel(rtc, LPC24XX_MIN,	tm->tm_min);
+	rtc_writel(rtc, LPC24XX_HOUR,	tm->tm_hour);
+	rtc_writel(rtc, LPC24XX_DOW,	tm->tm_wday);
+	rtc_writel(rtc, LPC24XX_DOM,	tm->tm_mday);
+	rtc_writel(rtc, LPC24XX_DOY,	tm->tm_yday);
+	rtc_writel(rtc, LPC24XX_MONTH,	tm->tm_mon);
+	rtc_writel(rtc, LPC24XX_YEAR,	tm->tm_year);
+
+	rtc_writel(rtc, LPC24XX_CCR, LPC24XX_CLKEN | LPC178X_CCALEN);
+
+	return 0;
+}
+
+static int lpc24xx_rtc_read_time(struct device *dev, struct rtc_time *tm)
+{
+	struct lpc24xx_rtc *rtc = dev_get_drvdata(dev);
+	u32 ct0, ct1, ct2;
+
+	ct0 = rtc_readl(rtc, LPC24XX_CTIME0);
+	ct1 = rtc_readl(rtc, LPC24XX_CTIME1);
+	ct2 = rtc_readl(rtc, LPC24XX_CTIME2);
+
+	tm->tm_sec  = CT0_SECS(ct0);
+	tm->tm_min  = CT0_MINS(ct0);
+	tm->tm_hour = CT0_HOURS(ct0);
+	tm->tm_wday = CT0_DOW(ct0);
+	tm->tm_mon  = CT1_MONTH(ct1);
+	tm->tm_mday = CT1_DOM(ct1);
+	tm->tm_year = CT1_YEAR(ct1);
+	tm->tm_yday = CT2_DOY(ct2);
+
+	return rtc_valid_tm(tm);
+}
+
+static int lpc24xx_rtc_read_alarm(struct device *dev, struct rtc_wkalrm *wkalrm)
+{
+	struct lpc24xx_rtc *rtc = dev_get_drvdata(dev);
+	struct rtc_time *tm = &wkalrm->time;
+
+	tm->tm_sec  = rtc_readl(rtc, LPC24XX_ALSEC);
+	tm->tm_min  = rtc_readl(rtc, LPC24XX_ALMIN);
+	tm->tm_hour = rtc_readl(rtc, LPC24XX_ALHOUR);
+	tm->tm_mday = rtc_readl(rtc, LPC24XX_ALDOM);
+	tm->tm_wday = rtc_readl(rtc, LPC24XX_ALDOW);
+	tm->tm_yday = rtc_readl(rtc, LPC24XX_ALDOY);
+	tm->tm_mon  = rtc_readl(rtc, LPC24XX_ALMON);
+	tm->tm_year = rtc_readl(rtc, LPC24XX_ALYEAR);
+
+	wkalrm->enabled = rtc_readl(rtc, LPC24XX_AMR) == 0;
+	wkalrm->pending = !!(rtc_readl(rtc, LPC24XX_ILR) & LPC24XX_RTCCIF);
+
+	return rtc_valid_tm(&wkalrm->time);
+}
+
+static int lpc24xx_rtc_set_alarm(struct device *dev, struct rtc_wkalrm *wkalrm)
+{
+	struct lpc24xx_rtc *rtc = dev_get_drvdata(dev);
+	struct rtc_time *tm = &wkalrm->time;
+
+	/* Disable alarm irq during update */
+	rtc_writel(rtc, LPC24XX_AMR, LPC24XX_ALARM_DISABLE);
+
+	rtc_writel(rtc, LPC24XX_ALSEC,  tm->tm_sec);
+	rtc_writel(rtc, LPC24XX_ALMIN,  tm->tm_min);
+	rtc_writel(rtc, LPC24XX_ALHOUR, tm->tm_hour);
+	rtc_writel(rtc, LPC24XX_ALDOM,  tm->tm_mday);
+	rtc_writel(rtc, LPC24XX_ALDOW,  tm->tm_wday);
+	rtc_writel(rtc, LPC24XX_ALDOY,  tm->tm_yday);
+	rtc_writel(rtc, LPC24XX_ALMON,  tm->tm_mon);
+	rtc_writel(rtc, LPC24XX_ALYEAR, tm->tm_year);
+
+	if (wkalrm->enabled)
+		rtc_writel(rtc, LPC24XX_AMR, 0);
+
+	return 0;
+}
+
+static int lpc24xx_rtc_alarm_irq_enable(struct device *dev, unsigned int enable)
+{
+	struct lpc24xx_rtc *rtc = dev_get_drvdata(dev);
+
+	if (enable)
+		rtc_writel(rtc, LPC24XX_AMR, 0);
+	else
+		rtc_writel(rtc, LPC24XX_AMR, LPC24XX_ALARM_DISABLE);
+
+	return 0;
+}
+
+static irqreturn_t lpc24xx_rtc_interrupt(int irq, void *data)
+{
+	unsigned long events = RTC_IRQF;
+	struct lpc24xx_rtc *rtc = data;
+	u32 rtc_iir;
+
+	/* Check interrupt cause */
+	rtc_iir = rtc_readl(rtc, LPC24XX_ILR);
+	if (rtc_iir & LPC24XX_RTCALF) {
+		events |= RTC_AF;
+		rtc_writel(rtc, LPC24XX_AMR, LPC24XX_ALARM_DISABLE);
+	}
+
+	/* Clear interrupt status and report event */
+	rtc_writel(rtc, LPC24XX_ILR, rtc_iir);
+	rtc_update_irq(rtc->rtc, 1, events);
+
+	return IRQ_HANDLED;
+}
+
+static const struct rtc_class_ops lpc24xx_rtc_ops = {
+	.read_time		= lpc24xx_rtc_read_time,
+	.set_time		= lpc24xx_rtc_set_time,
+	.read_alarm		= lpc24xx_rtc_read_alarm,
+	.set_alarm		= lpc24xx_rtc_set_alarm,
+	.alarm_irq_enable	= lpc24xx_rtc_alarm_irq_enable,
+};
+
+static int lpc24xx_rtc_probe(struct platform_device *pdev)
+{
+	struct lpc24xx_rtc *rtc;
+	struct resource *res;
+	int irq, ret;
+
+	rtc = devm_kzalloc(&pdev->dev, sizeof(*rtc), GFP_KERNEL);
+	if (!rtc)
+		return -ENOMEM;
+
+	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	rtc->rtc_base = devm_ioremap_resource(&pdev->dev, res);
+	if (IS_ERR(rtc->rtc_base))
+		return PTR_ERR(rtc->rtc_base);
+
+	irq = platform_get_irq(pdev, 0);
+	if (irq < 0) {
+		dev_warn(&pdev->dev, "can't get interrupt resource\n");
+		return irq;
+	}
+
+	rtc->clk_rtc = devm_clk_get(&pdev->dev, "rtc");
+	if (IS_ERR(rtc->clk_rtc)) {
+		dev_err(&pdev->dev, "error getting rtc clock\n");
+		return PTR_ERR(rtc->clk_rtc);
+	}
+
+	rtc->clk_reg = devm_clk_get(&pdev->dev, "reg");
+	if (IS_ERR(rtc->clk_reg)) {
+		dev_err(&pdev->dev, "error getting reg clock\n");
+		return PTR_ERR(rtc->clk_reg);
+	}
+
+	ret = clk_prepare_enable(rtc->clk_rtc);
+	if (ret) {
+		dev_err(&pdev->dev, "unable to enable rtc clock\n");
+		return ret;
+	}
+
+	ret = clk_prepare_enable(rtc->clk_reg);
+	if (ret) {
+		dev_err(&pdev->dev, "unable to enable reg clock\n");
+		goto disable_rtc_clk;
+	}
+
+	platform_set_drvdata(pdev, rtc);
+
+	/* Clear any pending interrupts */
+	rtc_writel(rtc, LPC24XX_ILR, LPC24XX_RTCCIF | LPC24XX_RTCALF);
+
+	/* Enable RTC count */
+	rtc_writel(rtc, LPC24XX_CCR, LPC24XX_CLKEN | LPC178X_CCALEN);
+
+	ret = devm_request_irq(&pdev->dev, irq, lpc24xx_rtc_interrupt, 0,
+			       pdev->name, rtc);
+	if (ret < 0) {
+		dev_warn(&pdev->dev, "can't request interrupt\n");
+		goto disable_clks;
+	}
+
+	rtc->rtc = devm_rtc_device_register(&pdev->dev, "lpc24xx-rtc",
+					    &lpc24xx_rtc_ops, THIS_MODULE);
+	if (IS_ERR(rtc->rtc)) {
+		dev_err(&pdev->dev, "can't register rtc device\n");
+		ret = PTR_ERR(rtc->rtc);
+		goto disable_clks;
+	}
+
+	return 0;
+
+disable_clks:
+	clk_disable_unprepare(rtc->clk_reg);
+disable_rtc_clk:
+	clk_disable_unprepare(rtc->clk_rtc);
+	return ret;
+}
+
+static int lpc24xx_rtc_remove(struct platform_device *pdev)
+{
+	struct lpc24xx_rtc *rtc = platform_get_drvdata(pdev);
+
+	/* Ensure all interrupt sources are masked */
+	rtc_writel(rtc, LPC24XX_AMR, LPC24XX_ALARM_DISABLE);
+	rtc_writel(rtc, LPC24XX_CIIR, 0);
+
+	rtc_writel(rtc, LPC24XX_CCR, LPC178X_CCALEN);
+
+	clk_disable_unprepare(rtc->clk_rtc);
+	clk_disable_unprepare(rtc->clk_reg);
+
+	return 0;
+}
+
+static const struct of_device_id lpc24xx_rtc_match[] = {
+	{ .compatible = "nxp,lpc1788-rtc" },
+	{ }
+};
+MODULE_DEVICE_TABLE(of, lpc24xx_rtc_match);
+
+static struct platform_driver lpc24xx_rtc_driver = {
+	.probe	= lpc24xx_rtc_probe,
+	.remove	= lpc24xx_rtc_remove,
+	.driver	= {
+		.name = "lpc24xx-rtc",
+		.of_match_table	= lpc24xx_rtc_match,
+	},
+};
+module_platform_driver(lpc24xx_rtc_driver);
+
+MODULE_AUTHOR("Kevin Wells <wellsk40@gmail.com");
+MODULE_DESCRIPTION("RTC driver for the LPC178x/18xx/408x/43xx SoCs");
+MODULE_LICENSE("GPL");
-- 
1.8.0

[PATCH v3 1/2] rtc: add rtc-lpc24xx driver

[Josh Cartwright]

On Sat, Jul 11, 2015 at 07:28:49PM +0200, Joachim Eastwood wrote:
> Add driver for the RTC found on NXP LPC178x/18xx/408x/43xx devices.
> The RTC provides calendar and clock functionality together with
> alarm interrupt support.
> 
> Signed-off-by: Joachim Eastwood <manabian@gmail.com>
> ---
[..]
> +static int lpc24xx_rtc_remove(struct platform_device *pdev)
> +{
> +	struct lpc24xx_rtc *rtc = platform_get_drvdata(pdev);
> +
> +	/* Ensure all interrupt sources are masked */
> +	rtc_writel(rtc, LPC24XX_AMR, LPC24XX_ALARM_DISABLE);
> +	rtc_writel(rtc, LPC24XX_CIIR, 0);
> +
> +	rtc_writel(rtc, LPC24XX_CCR, LPC178X_CCALEN);
> +
> +	clk_disable_unprepare(rtc->clk_rtc);
> +	clk_disable_unprepare(rtc->clk_reg);
> +
> +	return 0;
> +}
> +
> +static const struct of_device_id lpc24xx_rtc_match[] = {
> +	{ .compatible = "nxp,lpc1788-rtc" },
> +	{ }
> +};
> +MODULE_DEVICE_TABLE(of, lpc24xx_rtc_match);
> +
> +static struct platform_driver lpc24xx_rtc_driver = {
> +	.probe	= lpc24xx_rtc_probe,
> +	.remove	= lpc24xx_rtc_remove,
> +	.driver	= {
> +		.name = "lpc24xx-rtc",
> +		.of_match_table	= lpc24xx_rtc_match,
> +	},
> +};
> +module_platform_driver(lpc24xx_rtc_driver);
> +
> +MODULE_AUTHOR("Kevin Wells <wellsk40@gmail.com");

Missing closing '>'.

Otherwise,

Reviewed-by: Josh Cartwright <joshc@ni.com>

  Josh
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 473 bytes
Desc: not available
URL: <http://lists.infradead.org/pipermail/linux-arm-kernel/attachments/20150713/a7b93098/attachment-0001.sig>

[PATCH v3 1/2] rtc: add rtc-lpc24xx driver

[Joachim Eastwood]

On 13 July 2015 at 19:37, Josh Cartwright <joshc@ni.com> wrote:
> On Sat, Jul 11, 2015 at 07:28:49PM +0200, Joachim Eastwood wrote:
>> Add driver for the RTC found on NXP LPC178x/18xx/408x/43xx devices.
>> The RTC provides calendar and clock functionality together with
>> alarm interrupt support.
>>
>> Signed-off-by: Joachim Eastwood <manabian@gmail.com>
>> ---
> [..]
>> +static int lpc24xx_rtc_remove(struct platform_device *pdev)
>> +{
>> +     struct lpc24xx_rtc *rtc = platform_get_drvdata(pdev);
>> +
>> +     /* Ensure all interrupt sources are masked */
>> +     rtc_writel(rtc, LPC24XX_AMR, LPC24XX_ALARM_DISABLE);
>> +     rtc_writel(rtc, LPC24XX_CIIR, 0);
>> +
>> +     rtc_writel(rtc, LPC24XX_CCR, LPC178X_CCALEN);
>> +
>> +     clk_disable_unprepare(rtc->clk_rtc);
>> +     clk_disable_unprepare(rtc->clk_reg);
>> +
>> +     return 0;
>> +}
>> +
>> +static const struct of_device_id lpc24xx_rtc_match[] = {
>> +     { .compatible = "nxp,lpc1788-rtc" },
>> +     { }
>> +};
>> +MODULE_DEVICE_TABLE(of, lpc24xx_rtc_match);
>> +
>> +static struct platform_driver lpc24xx_rtc_driver = {
>> +     .probe  = lpc24xx_rtc_probe,
>> +     .remove = lpc24xx_rtc_remove,
>> +     .driver = {
>> +             .name = "lpc24xx-rtc",
>> +             .of_match_table = lpc24xx_rtc_match,
>> +     },
>> +};
>> +module_platform_driver(lpc24xx_rtc_driver);
>> +
>> +MODULE_AUTHOR("Kevin Wells <wellsk40@gmail.com");
>
> Missing closing '>'.

Ops. Well spotted.

> Otherwise,
>
> Reviewed-by: Josh Cartwright <joshc@ni.com>

Thanks, Josh.

I'll wait and see if Alexandre has any other comments before sending a
new version.


regards,
Joachim Eastwood

[PATCH v3 2/2] doc: dt: add documentation for nxp,lpc1788-rtc

[Joachim Eastwood]

Signed-off-by: Joachim Eastwood <manabian@gmail.com>
---
 .../devicetree/bindings/rtc/nxp,lpc1788-rtc.txt     | 21 +++++++++++++++++++++
 1 file changed, 21 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/rtc/nxp,lpc1788-rtc.txt

diff --git a/Documentation/devicetree/bindings/rtc/nxp,lpc1788-rtc.txt b/Documentation/devicetree/bindings/rtc/nxp,lpc1788-rtc.txt
new file mode 100644
index 000000000000..ad41a040432c
--- /dev/null
+++ b/Documentation/devicetree/bindings/rtc/nxp,lpc1788-rtc.txt
@@ -0,0 +1,21 @@
+NXP LPC1788 real-time clock
+
+The LPC1788 RTC provides calendar and clock functionality
+together with periodic tick and alarm interrupt support.
+
+Required properties:
+- compatible	: must contain "nxp,lpc1788-rtc"
+- reg		: Specifies base physical address and size of the registers.
+- interrupts	: A single interrupt specifier.
+- clocks	: Must contain entries for rtc and register clock
+- clock-names	: Must contain "rtc" and "reg"
+  See ../clocks/clock-bindings.txt for details.
+
+Example:
+rtc: rtc at 40046000 {
+	compatible = "nxp,lpc1788-rtc";
+	reg = <0x40046000 0x1000>;
+	interrupts = <47>;
+	clocks = <&creg_clk 0>, <&ccu1 CLK_CPU_BUS>;
+	clock-names = "rtc", "reg";
+};
-- 
1.8.0

[PATCH v3 2/2] doc: dt: add documentation for nxp,lpc1788-rtc

[Matt Porter]

On Sat, Jul 11, 2015 at 07:28:50PM +0200, Joachim Eastwood wrote:
> Signed-off-by: Joachim Eastwood <manabian@gmail.com>
> ---
>  .../devicetree/bindings/rtc/nxp,lpc1788-rtc.txt     | 21 +++++++++++++++++++++
>  1 file changed, 21 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/rtc/nxp,lpc1788-rtc.txt
> 
> diff --git a/Documentation/devicetree/bindings/rtc/nxp,lpc1788-rtc.txt b/Documentation/devicetree/bindings/rtc/nxp,lpc1788-rtc.txt
> new file mode 100644
> index 000000000000..ad41a040432c
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/rtc/nxp,lpc1788-rtc.txt
> @@ -0,0 +1,21 @@
> +NXP LPC1788 real-time clock
> +
> +The LPC1788 RTC provides calendar and clock functionality
> +together with periodic tick and alarm interrupt support.
> +
> +Required properties:
> +- compatible	: must contain "nxp,lpc1788-rtc"
> +- reg		: Specifies base physical address and size of the registers.
> +- interrupts	: A single interrupt specifier.
> +- clocks	: Must contain entries for rtc and register clock

"Must contain clock specifiers for rtc and register clock" ?

-Matt

> +- clock-names	: Must contain "rtc" and "reg"
> +  See ../clocks/clock-bindings.txt for details.
> +
> +Example:
> +rtc: rtc at 40046000 {
> +	compatible = "nxp,lpc1788-rtc";
> +	reg = <0x40046000 0x1000>;
> +	interrupts = <47>;
> +	clocks = <&creg_clk 0>, <&ccu1 CLK_CPU_BUS>;
> +	clock-names = "rtc", "reg";
> +};

[PATCH v3 2/2] doc: dt: add documentation for nxp,lpc1788-rtc

[Alexandre Belloni]

Hi,

On 27/07/2015 at 09:37:20 -0400, Matt Porter wrote :
> > +Required properties:
> > +- compatible	: must contain "nxp,lpc1788-rtc"
> > +- reg		: Specifies base physical address and size of the registers.
> > +- interrupts	: A single interrupt specifier.
> > +- clocks	: Must contain entries for rtc and register clock
> 
> "Must contain clock specifiers for rtc and register clock" ?
> 

I fixed it up in the patch.

-- 
Alexandre Belloni, Free Electrons
Embedded Linux, Kernel and Android engineering
http://free-electrons.com

[PATCH v3 0/2] RTC support for NXP LPC18xx family

[Alexandre Belloni]

Hi,

On 11/07/2015 at 19:28:48 +0200, Joachim Eastwood wrote :
> This patch set adds support for the RTC found on many NXP devices
> including LPC178x/18xx/408x/43xx. The RTC provides calendar and
> clock functionality together with alarm interrupt support.
> 
> The driver is a rework of an old driver by Kevin Wells. It has been
> modified to support modern resource allocation, device tree and
> generally cleaned up. Driver was originally written to support the
> LPC24xx platform but since this platform isn't upstream support has
> been removed. The LPC24xx name is still kept to preserve the origin
> of this hardware block.
> 
> Been a while since the last version, but this version should address
> all comments from Josh and Alexandre on v2. There has also been some
> rework from my side. Please have a look.
> 
> changes since v2:
>  - rework hw init
>  - update Kconfig text
>  - remove unused registers defines
>  - misc clean ups
>  - rebase on 4.2-rc1
> 
> changes since v1:
>  - s/lpc2k/lpc24xx for better consistency
>  - fix Kconfig entry
>  - drop support for old versions for the ip block
> 
> Patch set is based on Linux v4.2-rc1.
> 
> Joachim Eastwood (2):
>   rtc: add rtc-lpc24xx driver
>   doc: dt: add documentation for nxp,lpc1788-rtc
> 

Applied both after adding a proper commit log to the second patch,
reordering to avoid a checkpatch warning and fixing the typo in kevin's
mail address.


-- 
Alexandre Belloni, Free Electrons
Embedded Linux, Kernel and Android engineering
http://free-electrons.com

[PATCH v3 0/2] RTC support for NXP LPC18xx family

[Joachim Eastwood]

On 21 July 2015 at 18:28, Alexandre Belloni
<alexandre.belloni@free-electrons.com> wrote:
> Hi,
>
> On 11/07/2015 at 19:28:48 +0200, Joachim Eastwood wrote :
>> This patch set adds support for the RTC found on many NXP devices
>> including LPC178x/18xx/408x/43xx. The RTC provides calendar and
>> clock functionality together with alarm interrupt support.
>>
>> The driver is a rework of an old driver by Kevin Wells. It has been
>> modified to support modern resource allocation, device tree and
>> generally cleaned up. Driver was originally written to support the
>> LPC24xx platform but since this platform isn't upstream support has
>> been removed. The LPC24xx name is still kept to preserve the origin
>> of this hardware block.
>>
>> Been a while since the last version, but this version should address
>> all comments from Josh and Alexandre on v2. There has also been some
>> rework from my side. Please have a look.
>>
>> changes since v2:
>>  - rework hw init
>>  - update Kconfig text
>>  - remove unused registers defines
>>  - misc clean ups
>>  - rebase on 4.2-rc1
>>
>> changes since v1:
>>  - s/lpc2k/lpc24xx for better consistency
>>  - fix Kconfig entry
>>  - drop support for old versions for the ip block
>>
>> Patch set is based on Linux v4.2-rc1.
>>
>> Joachim Eastwood (2):
>>   rtc: add rtc-lpc24xx driver
>>   doc: dt: add documentation for nxp,lpc1788-rtc
>>
>
> Applied both after adding a proper commit log to the second patch,
> reordering to avoid a checkpatch warning and fixing the typo in kevin's
> mail address.

Thanks for fixing up and applying, Alexandre.

regards,
Joachim Eastwood