From: rsahu@apm.com (Rameshwar Prasad Sahu)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH] dmaengine: xgene-dma: Add ACPI support for X-Gene DMA engine driver
Date: Tue, 21 Jul 2015 18:44:39 +0530 [thread overview]
Message-ID: <1437484479-2822-1-git-send-email-rsahu@apm.com> (raw)
This patch adds ACPI support for the APM X-Gene DMA engine driver.
Signed-off-by: Rameshwar Prasad Sahu <rsahu@apm.com>
---
drivers/dma/xgene-dma.c | 28 +++++++++++++++++++++-------
1 file changed, 21 insertions(+), 7 deletions(-)
diff --git a/drivers/dma/xgene-dma.c b/drivers/dma/xgene-dma.c
index dff22ab..d0a148d 100644
--- a/drivers/dma/xgene-dma.c
+++ b/drivers/dma/xgene-dma.c
@@ -21,6 +21,7 @@
* NOTE: PM support is currently not available.
*/
+#include <linux/acpi.h>
#include <linux/clk.h>
#include <linux/delay.h>
#include <linux/dma-mapping.h>
@@ -1944,16 +1945,18 @@ static int xgene_dma_probe(struct platform_device *pdev)
return ret;
pdma->clk = devm_clk_get(&pdev->dev, NULL);
- if (IS_ERR(pdma->clk)) {
+ if (IS_ERR(pdma->clk) && !ACPI_COMPANION(&pdev->dev)) {
dev_err(&pdev->dev, "Failed to get clk\n");
return PTR_ERR(pdma->clk);
}
/* Enable clk before accessing registers */
- ret = clk_prepare_enable(pdma->clk);
- if (ret) {
- dev_err(&pdev->dev, "Failed to enable clk %d\n", ret);
- return ret;
+ if (!IS_ERR(pdma->clk)) {
+ ret = clk_prepare_enable(pdma->clk);
+ if (ret) {
+ dev_err(&pdev->dev, "Failed to enable clk %d\n", ret);
+ return ret;
+ }
}
/* Remove DMA RAM out of shutdown */
@@ -1998,7 +2001,8 @@ err_request_irq:
err_dma_mask:
err_clk_enable:
- clk_disable_unprepare(pdma->clk);
+ if (!IS_ERR(pdma->clk))
+ clk_disable_unprepare(pdma->clk);
return ret;
}
@@ -2022,11 +2026,20 @@ static int xgene_dma_remove(struct platform_device *pdev)
xgene_dma_delete_chan_rings(chan);
}
- clk_disable_unprepare(pdma->clk);
+ if (!IS_ERR(pdma->clk))
+ clk_disable_unprepare(pdma->clk);
return 0;
}
+#ifdef CONFIG_ACPI
+static const struct acpi_device_id xgene_dma_acpi_match_ptr[] = {
+ {"APMC0D43", 0},
+ {},
+};
+MODULE_DEVICE_TABLE(acpi, xgene_dma_acpi_match_ptr);
+#endif
+
static const struct of_device_id xgene_dma_of_match_ptr[] = {
{.compatible = "apm,xgene-storm-dma",},
{},
@@ -2039,6 +2052,7 @@ static struct platform_driver xgene_dma_driver = {
.driver = {
.name = "X-Gene-DMA",
.of_match_table = xgene_dma_of_match_ptr,
+ .acpi_match_table = ACPI_PTR(xgene_dma_acpi_match_ptr),
},
};
--
1.8.2.1
next reply other threads:[~2015-07-21 13:14 UTC|newest]
Thread overview: 7+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-07-21 13:14 Rameshwar Prasad Sahu [this message]
2015-07-28 10:03 ` [PATCH] dmaengine: xgene-dma: Add ACPI support for X-Gene DMA engine driver Rameshwar Sahu
2015-07-29 14:34 ` Arnd Bergmann
2015-07-30 8:51 ` Rameshwar Sahu
2015-08-01 21:28 ` Arnd Bergmann
2015-08-13 7:18 ` Rameshwar Sahu
2015-08-20 6:27 ` Vinod Koul
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1437484479-2822-1-git-send-email-rsahu@apm.com \
--to=rsahu@apm.com \
--cc=linux-arm-kernel@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).