From mboxrd@z Thu Jan 1 00:00:00 1970 From: jszhang@marvell.com (Jisheng Zhang) Date: Tue, 21 Jul 2015 22:17:57 +0800 Subject: [PATCH 0/2] arm64: Add basic support for Marvell Berlin4CT SoC Message-ID: <1437488279-2088-1-git-send-email-jszhang@marvell.com> To: linux-arm-kernel@lists.infradead.org List-Id: linux-arm-kernel.lists.infradead.org Marvell Berlin4CT is a SoC based on 64bit ARMv8 architecture. It contains quad CA53 cores. This SoC shares many HW IP with BG2Q and other berlin series. This patchset was tested on Berlin4CT DMP board, and boot to shell ok. Jisheng Zhang (2): arm64: dts: Add dts files for Marvell Berlin4CT SoC arm64: Enable Marvell Berlin SoC family in Kconfig and defconfig arch/arm64/Kconfig.platforms | 6 + arch/arm64/boot/dts/Makefile | 1 + arch/arm64/boot/dts/marvell/Makefile | 5 + arch/arm64/boot/dts/marvell/berlin4ct-dmp.dts | 68 +++++++++++ arch/arm64/boot/dts/marvell/berlin4ct.dtsi | 160 ++++++++++++++++++++++++++ arch/arm64/configs/defconfig | 1 + 6 files changed, 241 insertions(+) create mode 100644 arch/arm64/boot/dts/marvell/Makefile create mode 100644 arch/arm64/boot/dts/marvell/berlin4ct-dmp.dts create mode 100644 arch/arm64/boot/dts/marvell/berlin4ct.dtsi -- 2.1.4