From: yingjoe.chen@mediatek.com (Yingjoe Chen)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH 1/5] clocksource: mediatek: do not enable GPT_CLK_EVT when setup
Date: Wed, 22 Jul 2015 16:24:49 +0800 [thread overview]
Message-ID: <1437553489.22203.6.camel@mtksdaap41> (raw)
In-Reply-To: <CAGS+omD8k_Cfxv3bYyjmjtLbiavo-WmJPn0Z-CBhN_nnv65Tag@mail.gmail.com>
On Tue, 2015-07-14 at 15:39 +0800, Daniel Kurtz wrote:
> Hi Yingjoe,
>
> On Mon, Jul 13, 2015 at 5:32 PM, Yingjoe Chen <yingjoe.chen@mediatek.com> wrote:
> > Spurious mtk timer interrupt is noticed at boot and cause kernel
> > crash. It seems if GPT is enabled, it will latch irq status even
> > when its IRQ is disabled. When irq is enabled afterward, we see
> > spurious interrupt.
> > Change init flow to only enable GPT_CLK_SRC at mtk_timer_init.
> >
> > Signed-off-by: Yingjoe Chen <yingjoe.chen@mediatek.com>
> > ---
> > drivers/clocksource/mtk_timer.c | 16 ++++++++++------
> > 1 file changed, 10 insertions(+), 6 deletions(-)
> >
> > diff --git a/drivers/clocksource/mtk_timer.c b/drivers/clocksource/mtk_timer.c
> > index 68ab423..237c20b 100644
> > --- a/drivers/clocksource/mtk_timer.c
> > +++ b/drivers/clocksource/mtk_timer.c
> > @@ -156,9 +156,11 @@ static void mtk_timer_global_reset(struct mtk_clock_event_device *evt)
> > writel(0x3f, evt->gpt_base + GPT_IRQ_ACK_REG);
> > }
> >
> > -static void
> > -mtk_timer_setup(struct mtk_clock_event_device *evt, u8 timer, u8 option)
> > +static void mtk_timer_setup(struct mtk_clock_event_device *evt, u8 timer,
> > + u8 option, bool enable)
>
> This function can be: __init
>
> Other than this tiny nit, and the small potential conflict in patch 4,
> this whole series is:
>
> Reviewed-by: Daniel Kurtz <djkurtz@chromium.org>
>
> (I do think it is a bit strange that the mediatek,mt6577-timer binding
> does not use "clock-names", but that is independent of this patch
> set).
>
Hi Daniel,
Thanks for your review.
I added __init as you suggested, and Pi-Cheng already sent an updated
version of his patch to resolve the conflict[1].
Joe.C
[1]
http://lists.infradead.org/pipermail/linux-mediatek/2015-July/001592.html
next prev parent reply other threads:[~2015-07-22 8:24 UTC|newest]
Thread overview: 41+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-07-13 9:32 [PATCH 0/5] add GPT timer support for mt8173 Yingjoe Chen
2015-07-13 9:32 ` [PATCH 1/5] clocksource: mediatek: do not enable GPT_CLK_EVT when setup Yingjoe Chen
2015-07-14 7:39 ` Daniel Kurtz
2015-07-22 8:14 ` [PATCH v2 " Yingjoe Chen
2015-07-31 3:14 ` Yingjoe Chen
2015-08-13 8:35 ` Daniel Lezcano
2015-08-17 14:10 ` Yingjoe Chen
2015-08-20 14:28 ` Daniel Lezcano
2015-08-21 14:39 ` Yingjoe Chen
2015-08-24 7:51 ` Daniel Lezcano
2015-08-24 14:22 ` Yingjoe Chen
2015-08-24 13:30 ` [PATCH] clockevents/drivers/mtk: Fix spurious interrupt leading to crash Daniel Lezcano
2015-08-24 14:35 ` Yingjoe Chen
2015-08-24 21:57 ` [PATCH V2] " Daniel Lezcano
2015-08-25 13:21 ` Yingjoe Chen
2015-08-26 14:25 ` Daniel Lezcano
2015-09-04 7:15 ` Yingjoe Chen
2015-09-04 7:36 ` Daniel Lezcano
2015-10-27 11:11 ` Matthias Brugger
2015-10-27 11:23 ` Daniel Lezcano
2015-10-27 11:47 ` Daniel Lezcano
2015-07-22 8:24 ` Yingjoe Chen [this message]
2015-07-17 21:56 ` [PATCH 1/5] clocksource: mediatek: do not enable GPT_CLK_EVT when setup Matthias Brugger
2015-07-13 9:32 ` [PATCH 2/5] clocksource: mediatek: Use GPT as sched clock source Yingjoe Chen
2015-07-14 0:40 ` Stephen Boyd
2015-07-17 21:49 ` Matthias Brugger
2015-07-13 9:32 ` [PATCH 3/5] arm64: mediatek: enable MTK_TIMER Yingjoe Chen
2015-07-17 21:54 ` Matthias Brugger
2015-07-18 7:31 ` Thomas Gleixner
2015-07-21 7:52 ` Matthias Brugger
2015-07-13 9:32 ` [PATCH 4/5] clk: mediatek: add 13mhz clock for MT8173 Yingjoe Chen
2015-07-14 0:40 ` Stephen Boyd
2015-07-14 7:34 ` Daniel Kurtz
2015-07-13 9:32 ` [PATCH 5/5] arm64: dts: mt8173: add timer node Yingjoe Chen
2015-07-14 4:26 ` Daniel Kurtz
2015-07-14 4:27 ` Daniel Kurtz
2015-08-11 15:54 ` [PATCH 0/5] add GPT timer support for mt8173 Daniel Kurtz
2015-08-12 12:32 ` Daniel Lezcano
2015-08-13 4:49 ` Daniel Kurtz
2015-08-26 7:37 ` Daniel Lezcano
2015-08-26 14:10 ` Yingjoe Chen
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1437553489.22203.6.camel@mtksdaap41 \
--to=yingjoe.chen@mediatek.com \
--cc=linux-arm-kernel@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).