[PATCH v6 0/2] IMX GPCv2 drivers for wakeup source and suspend

[PATCH v6 0/2] IMX GPCv2 drivers for wakeup source and suspend

[Shenwei Wang]

IMX7D contains a new version of GPC IP block (GPCv2). It has two
major functions: power management and wakeup source management.

Two drivers were developed to support these functions:
One irqchip driver (irq-imx-gpcv2.c) is to manage
the interrupt wakeup source. One suspend driver (pm-imx7.c) is used
to manage the system power states.

Patch V6:
	Clean up the codes (irq-imx-gpcv2.c) according to the review
	feedback of Thomas Glx
	Use raw_spin_lock in the irq_mask and irq_unmask callbacks
	Split the struct definition into two: irqchip and suspend
	Unified coding style

Patch V5:
	Splitted it into two patches per Thomas Gleixner suggestion.
	-- one for irqchip
	-- one for suspend

Patch V4:
	Splitted the driver into two function drivers: one irqchip driver
	for wakeup source management, and one suspend driver for power
	state management.

Patch V3:
	Added the assemble codes (suspend-imx7.S) for SUSPEND_MEM state.
	Supported the SUSPEND_MEM power mode.

Patch V2:
	Added the basic driver APIs for power management.
	Supported the STANDBY power mode.

Patch V1:
	Implemented the driver for IRQ wakeup sources.

Shenwei Wang (2):
  irqchip: imx-gpcv2: IMX GPCv2 driver for wakeup sources
  ARM: imx: Add suspend codes for imx7D

 arch/arm/mach-imx/Kconfig        |   1 +
 arch/arm/mach-imx/Makefile       |   2 +
 arch/arm/mach-imx/pm-imx7.c      | 765 +++++++++++++++++++++++++++++++++++++++
 arch/arm/mach-imx/suspend-imx7.S | 529 +++++++++++++++++++++++++++
 drivers/irqchip/Kconfig          |   7 +
 drivers/irqchip/Makefile         |   1 +
 drivers/irqchip/irq-imx-gpcv2.c  | 263 ++++++++++++++
 include/soc/imx/gpcv2.h          | 163 +++++++++
 8 files changed, 1731 insertions(+)
 create mode 100644 arch/arm/mach-imx/pm-imx7.c
 create mode 100644 arch/arm/mach-imx/suspend-imx7.S
 create mode 100644 drivers/irqchip/irq-imx-gpcv2.c
 create mode 100644 include/soc/imx/gpcv2.h

--
2.5.0.rc2

[PATCH v6 1/2] irqchip: imx-gpcv2: IMX GPCv2 driver for wakeup sources

[Shenwei Wang]

IMX7D contains a new version of GPC IP block (GPCv2). It has two
major functions: power management and wakeup source management.
This patch adds a new irqchip driver to manage the interrupt wakeup
sources on IMX7D.
When the system is in WFI (wait for interrupt) mode, this GPC block
will be the first block on the platform to be activated and signaled.
Under normal wait mode during cpu idle, the system can be woke up
by any enabled interrupts. Under standby or suspend mode, the system
can only be woke up by the pre-defined wakeup sources.

Signed-off-by: Shenwei Wang <shenwei.wang@freescale.com>
Signed-off-by: Anson Huang <b20788@freescale.com>
---
 drivers/irqchip/Kconfig         |   7 ++
 drivers/irqchip/Makefile        |   1 +
 drivers/irqchip/irq-imx-gpcv2.c | 263 ++++++++++++++++++++++++++++++++++++++++
 include/soc/imx/gpcv2.h         | 163 +++++++++++++++++++++++++
 4 files changed, 434 insertions(+)
 create mode 100644 drivers/irqchip/irq-imx-gpcv2.c
 create mode 100644 include/soc/imx/gpcv2.h

diff --git a/drivers/irqchip/Kconfig b/drivers/irqchip/Kconfig
index 6de62a9..6a68cd5 100644
--- a/drivers/irqchip/Kconfig
+++ b/drivers/irqchip/Kconfig
@@ -158,3 +158,10 @@ config KEYSTONE_IRQ
 config MIPS_GIC
 	bool
 	select MIPS_CM
+
+config IMX_GPCV2
+	bool
+	select IRQ_DOMAIN
+	help
+	  Enables the wakeup IRQs for IMX platforms with GPCv2 block
+
diff --git a/drivers/irqchip/Makefile b/drivers/irqchip/Makefile
index dda4927..e6f4495 100644
--- a/drivers/irqchip/Makefile
+++ b/drivers/irqchip/Makefile
@@ -47,3 +47,4 @@ obj-$(CONFIG_KEYSTONE_IRQ)		+= irq-keystone.o
 obj-$(CONFIG_MIPS_GIC)			+= irq-mips-gic.o
 obj-$(CONFIG_ARCH_MEDIATEK)		+= irq-mtk-sysirq.o
 obj-$(CONFIG_ARCH_DIGICOLOR)		+= irq-digicolor.o
+obj-$(CONFIG_IMX_GPCV2)			+= irq-imx-gpcv2.o
diff --git a/drivers/irqchip/irq-imx-gpcv2.c b/drivers/irqchip/irq-imx-gpcv2.c
new file mode 100644
index 0000000..107c313
--- /dev/null
+++ b/drivers/irqchip/irq-imx-gpcv2.c
@@ -0,0 +1,263 @@
+
+/*
+ * Copyright (C) 2015 Freescale Semiconductor, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/of_address.h>
+#include <linux/of_irq.h>
+#include <linux/slab.h>
+#include <linux/irqchip.h>
+#include <linux/syscore_ops.h>
+
+#include <soc/imx/gpcv2.h>
+
+struct imx_gpcv2_irq *gpcv2_irq_instance;
+
+static int gpcv2_wakeup_source_save(void)
+{
+	struct imx_gpcv2_irq *cd;
+	void __iomem *reg;
+	int i;
+
+	cd = gpcv2_irq_instance;
+	if (!cd)
+		return 0;
+
+	for (i = 0; i < IMR_NUM; i++) {
+		reg = cd->gpc_base + cd->cpu2wakeup + i * 4;
+		cd->enabled_irqs[i] = readl_relaxed(reg);
+		writel_relaxed(cd->wakeup_sources[i], reg);
+	}
+
+	return 0;
+}
+
+static void gpcv2_wakeup_source_restore(void)
+{
+	struct imx_gpcv2_irq *cd;
+	void __iomem *reg;
+	int i;
+
+	cd = gpcv2_irq_instance;
+	if (!cd)
+		return;
+
+	for (i = 0; i < IMR_NUM; i++) {
+		reg = cd->gpc_base + cd->cpu2wakeup + i * 4;
+		writel_relaxed(cd->enabled_irqs[i], reg);
+		cd->wakeup_sources[i] = ~0;
+	}
+}
+
+static struct syscore_ops imx_gpcv2_syscore_ops = {
+	.suspend	= gpcv2_wakeup_source_save,
+	.resume		= gpcv2_wakeup_source_restore,
+};
+
+static int imx_gpcv2_irq_set_wake(struct irq_data *d, unsigned int on)
+{
+	struct imx_gpcv2_irq *cd = d->chip_data;
+	unsigned int idx = d->hwirq / 32;
+	unsigned long flags;
+	void __iomem *reg;
+	u32 mask, val;
+
+	raw_spin_lock_irqsave(&cd->lock.rlock, flags);
+	reg = cd->gpc_base + cd->cpu2wakeup + idx * 4;
+	mask = 1 << d->hwirq % 32;
+	val = cd->wakeup_sources[idx];
+
+	cd->wakeup_sources[idx] = on ? (val & ~mask) : (val | mask);
+	raw_spin_unlock_irqrestore(&cd->lock.rlock, flags);
+
+	/*
+	 * Do *not* call into the parent, as the GIC doesn't have any
+	 * wake-up facility...
+	 */
+
+	return 0;
+}
+
+
+static void imx_gpcv2_irq_unmask(struct irq_data *d)
+{
+	struct imx_gpcv2_irq *cd = d->chip_data;
+	void __iomem *reg;
+	u32 val;
+
+	raw_spin_lock(&cd->lock.rlock);
+	reg = cd->gpc_base + cd->cpu2wakeup + d->hwirq / 32 * 4;
+	val = readl_relaxed(reg);
+	val &= ~(1 << d->hwirq % 32);
+	writel_relaxed(val, reg);
+	raw_spin_unlock(&cd->lock.rlock);
+
+	irq_chip_unmask_parent(d);
+}
+
+static void imx_gpcv2_irq_mask(struct irq_data *d)
+{
+	struct imx_gpcv2_irq *cd = d->chip_data;
+	void __iomem *reg;
+	u32 val;
+
+	raw_spin_lock(&cd->lock.rlock);
+	reg = cd->gpc_base + cd->cpu2wakeup + d->hwirq / 32 * 4;
+	val = readl_relaxed(reg);
+	val |= 1 << (d->hwirq % 32);
+	writel_relaxed(val, reg);
+	raw_spin_unlock(&cd->lock.rlock);
+
+	irq_chip_mask_parent(d);
+}
+
+
+static struct irq_chip imx_gpcv2_irq_chip = {
+	.name			= "GPCv2",
+	.irq_eoi		= irq_chip_eoi_parent,
+	.irq_mask		= imx_gpcv2_irq_mask,
+	.irq_unmask		= imx_gpcv2_irq_unmask,
+	.irq_set_wake		= imx_gpcv2_irq_set_wake,
+	.irq_retrigger		= irq_chip_retrigger_hierarchy,
+#ifdef CONFIG_SMP
+	.irq_set_affinity	= irq_chip_set_affinity_parent,
+#endif
+};
+
+static int imx_gpcv2_domain_xlate(struct irq_domain *domain,
+				struct device_node *controller,
+				const u32 *intspec,
+				unsigned int intsize,
+				unsigned long *out_hwirq,
+				unsigned int *out_type)
+{
+	/* Shouldn't happen, really... */
+	if (domain->of_node != controller)
+		return -EINVAL;
+
+	/* Not GIC compliant */
+	if (intsize != 3)
+		return -EINVAL;
+
+	/* No PPI should point to this domain */
+	if (intspec[0] != 0)
+		return -EINVAL;
+
+	*out_hwirq = intspec[1];
+	*out_type = intspec[2];
+	return 0;
+}
+
+static int imx_gpcv2_domain_alloc(struct irq_domain *domain,
+				  unsigned int irq, unsigned int nr_irqs,
+				  void *data)
+{
+	struct of_phandle_args *args = data;
+	struct of_phandle_args parent_args;
+	irq_hw_number_t hwirq;
+	int i;
+
+	/* Not GIC compliant */
+	if (args->args_count != 3)
+		return -EINVAL;
+
+	/* No PPI should point to this domain */
+	if (args->args[0] != 0)
+		return -EINVAL;
+
+	/* Can't deal with this */
+	hwirq = args->args[1];
+	if (hwirq >= GPC_MAX_IRQS)
+		return -EINVAL;
+
+	for (i = 0; i < nr_irqs; i++) {
+		irq_domain_set_hwirq_and_chip(domain, irq + i, hwirq + i,
+				&imx_gpcv2_irq_chip, domain->host_data);
+	}
+	parent_args = *args;
+	parent_args.np = domain->parent->of_node;
+	return irq_domain_alloc_irqs_parent(domain, irq, nr_irqs, &parent_args);
+}
+
+static struct irq_domain_ops imx_gpcv2_irq_domain_ops = {
+	.xlate	= imx_gpcv2_domain_xlate,
+	.alloc	= imx_gpcv2_domain_alloc,
+	.free	= irq_domain_free_irqs_common,
+};
+
+
+
+static int __init imx_gpcv2_irqchip_init(struct device_node *node,
+			       struct device_node *parent)
+{
+	struct irq_domain *parent_domain, *domain;
+	struct imx_gpcv2_irq *cd;
+	int i, val;
+
+	if (!parent) {
+		pr_err("%s: no parent, giving up\n", node->full_name);
+		return -ENODEV;
+	}
+
+	parent_domain = irq_find_host(parent);
+	if (!parent_domain) {
+		pr_err("%s: unable to get parent domain\n", node->full_name);
+		return -ENXIO;
+	}
+
+	cd = kzalloc(sizeof(struct imx_gpcv2_irq), GFP_KERNEL);
+
+	cd->gpc_base = of_iomap(node, 0);
+	if (!cd->gpc_base) {
+		pr_err("fsl-gpcv2: unable to map gpc registers\n");
+		kfree(cd);
+		return -ENOMEM;
+	}
+
+	domain = irq_domain_add_hierarchy(parent_domain, 0, GPC_MAX_IRQS,
+				node, &imx_gpcv2_irq_domain_ops, cd);
+	if (!domain) {
+		iounmap(cd->gpc_base);
+		kfree(cd);
+		return -ENOMEM;
+	}
+	irq_set_default_host(domain);
+
+	/* Initially mask all interrupts */
+	for (i = 0; i < IMR_NUM; i++) {
+		writel_relaxed(~0, cd->gpc_base + GPC_IMR1_CORE0 + i * 4);
+		writel_relaxed(~0, cd->gpc_base + GPC_IMR1_CORE1 + i * 4);
+		cd->wakeup_sources[i] = ~0;
+	}
+
+	/* Let CORE0 as the default CPU to wake up by GPC */
+	cd->cpu2wakeup = GPC_IMR1_CORE0;
+
+	/* only external IRQs to wake up LPM and core 0/1 */
+	val = readl_relaxed(cd->gpc_base + GPC_LPCR_A7_BSC);
+	val |= BM_LPCR_A7_BSC_IRQ_SRC_A7_WAKEUP;
+	writel_relaxed(val, cd->gpc_base + GPC_LPCR_A7_BSC);
+	/* mask m4 dsm trigger */
+	writel_relaxed(readl_relaxed(cd->gpc_base + GPC_LPCR_M4) |
+		BM_LPCR_M4_MASK_DSM_TRIGGER, cd->gpc_base + GPC_LPCR_M4);
+	/* set mega/fast mix in A7 domain */
+	writel_relaxed(0x1, cd->gpc_base + GPC_PGC_CPU_MAPPING);
+	/* set SCU timing */
+	writel_relaxed((0x59 << 10) | 0x5B | (0x51 << 20),
+		cd->gpc_base + GPC_PGC_SCU_TIMING);
+
+	gpcv2_irq_instance = cd;
+
+	register_syscore_ops(&imx_gpcv2_syscore_ops);
+
+	return 0;
+}
+
+
+IRQCHIP_DECLARE(imx_gpcv2, "fsl,imx7d-gpc", imx_gpcv2_irqchip_init);
+
+
diff --git a/include/soc/imx/gpcv2.h b/include/soc/imx/gpcv2.h
new file mode 100644
index 0000000..73d6e75
--- /dev/null
+++ b/include/soc/imx/gpcv2.h
@@ -0,0 +1,163 @@
+/*
+ * Copyright (C) 2015 Freescale Semiconductor, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef __SOC_IMX_GPCV2_H__
+#define __SOC_IMX_GPCV2_H__
+
+
+#define IMR_NUM			4
+#define GPC_MAX_IRQS            (IMR_NUM * 32)
+
+#define GPC_LPCR_A7_BSC		0x0
+#define GPC_LPCR_M4		0x8
+
+#define GPC_IMR1_CORE0		0x30
+#define GPC_IMR1_CORE1		0x40
+
+#define GPC_PGC_CPU_MAPPING	0xec
+#define GPC_PGC_SCU_TIMING	0x890
+
+#define BM_LPCR_A7_BSC_IRQ_SRC_A7_WAKEUP	0x70000000
+#define BM_LPCR_M4_MASK_DSM_TRIGGER		0x80000000
+
+
+#define GPC_LPCR_A7_AD		0x4
+#define GPC_SLPCR		0x14
+#define GPC_PGC_ACK_SEL_A7	0x24
+
+#define GPC_SLOT0_CFG		0xb0
+
+#define GPC_PGC_C0		0x800
+#define GPC_PGC_SCU_TIMING	0x890
+#define GPC_PGC_C1		0x840
+#define GPC_PGC_SCU		0x880
+#define GPC_PGC_FM		0xa00
+
+#define BM_LPCR_A7_BSC_CPU_CLK_ON_LPM		0x4000
+#define BM_LPCR_A7_BSC_LPM1			0xc
+#define BM_LPCR_A7_BSC_LPM0			0x3
+#define BP_LPCR_A7_BSC_LPM1			2
+#define BP_LPCR_A7_BSC_LPM0			0
+
+#define BM_SLPCR_EN_DSM				0x80000000
+#define BM_SLPCR_RBC_EN				0x40000000
+#define BM_SLPCR_VSTBY				0x4
+#define BM_SLPCR_SBYOS				0x2
+#define BM_SLPCR_BYPASS_PMIC_READY		0x1
+
+
+#define BM_LPCR_A7_AD_L2PGE			0x10000
+#define BM_LPCR_A7_AD_EN_C1_PUP			0x800
+#define BM_LPCR_A7_AD_EN_C1_IRQ_PUP		0x400
+#define BM_LPCR_A7_AD_EN_C0_PUP			0x200
+#define BM_LPCR_A7_AD_EN_C0_IRQ_PUP		0x100
+#define BM_LPCR_A7_AD_EN_PLAT_PDN		0x10
+#define BM_LPCR_A7_AD_EN_C1_PDN			0x8
+#define BM_LPCR_A7_AD_EN_C1_WFI_PDN		0x4
+#define BM_LPCR_A7_AD_EN_C0_PDN			0x2
+#define BM_LPCR_A7_AD_EN_C0_WFI_PDN		0x1
+
+#define BM_GPC_PGC_ACK_SEL_A7_DUMMY_PUP_ACK	0x80000000
+#define BM_GPC_PGC_ACK_SEL_A7_DUMMY_PDN_ACK	0x8000
+
+#define MAX_SLOT_NUMBER				10
+#define A7_LPM_WAIT				0x5
+#define A7_LPM_STOP				0xa
+
+
+#define REG_SET		0x4
+#define REG_CLR		0x8
+
+#define ANADIG_ARM_PLL		0x60
+#define ANADIG_DDR_PLL		0x70
+#define ANADIG_SYS_PLL		0xb0
+#define ANADIG_ENET_PLL		0xe0
+#define ANADIG_AUDIO_PLL	0xf0
+#define ANADIG_VIDEO_PLL	0x130
+
+
+enum gpcv2_mode {
+	WAIT_CLOCKED,
+	WAIT_UNCLOCKED,
+	WAIT_UNCLOCKED_POWER_OFF,
+	STOP_POWER_ON,
+	STOP_POWER_OFF,
+};
+
+
+/* GPCv2 has the following power domains, and each domain can be power-up
+ * and power-down via GPC settings.
+ *
+ * 	Core 0 of A7 power domain
+ * 	Core1 of A7 power domain
+ * 	SCU/L2 cache RAM of A7 power domain
+ * 	Fastmix and megamix power domain
+ * 	USB OTG1 PHY power domain
+ * 	USB OTG2 PHY power domain
+ * 	PCIE PHY power domain
+ * 	USB HSIC PHY power domain
+ *	Core 0 of M4 power domain
+ */
+enum gpcv2_slot {
+	CORE0_A7,
+	CORE1_A7,
+	SCU_A7,
+	FAST_MEGA_MIX,
+	MIPI_PHY,
+	PCIE_PHY,
+	USB_OTG1_PHY,
+	USB_OTG2_PHY,
+	USB_HSIC_PHY,
+	CORE0_M4,
+};
+
+struct imx_gpcv2;
+
+struct imx_gpcv2_irq {
+	spinlock_t lock;
+	void __iomem *gpc_base;
+	u32 wakeup_sources[IMR_NUM];
+	u32 enabled_irqs[IMR_NUM];
+	u32 cpu2wakeup;
+};
+
+struct imx_gpcv2_suspend {
+	struct regmap *anatop;
+	struct regmap *imx_src;
+	u32 mfmix_mask[IMR_NUM];
+	u32 wakeupmix_mask[IMR_NUM];
+	u32 lpsrmix_mask[IMR_NUM];
+
+	void (*set_mode)(struct imx_gpcv2 *, enum gpcv2_mode mode);
+	void (*lpm_cpu_power_gate)(struct imx_gpcv2 *, u32, bool);
+	void (*lpm_plat_power_gate)(struct imx_gpcv2 *, bool);
+	void (*lpm_env_setup)(struct imx_gpcv2 *);
+	void (*lpm_env_clean)(struct imx_gpcv2 *);
+
+	void (*set_slot)(struct imx_gpcv2 *cd, u32 index,
+			enum gpcv2_slot m_core, bool mode, bool ack);
+	void (*clear_slots)(struct imx_gpcv2 *);
+	void (*lpm_enable_core)(struct imx_gpcv2 *,
+			bool enable, u32 offset);
+
+	void (*standby)(struct imx_gpcv2 *);
+	void (*suspend)(struct imx_gpcv2 *);
+
+	void (*suspend_fn_in_ocram)(void __iomem *ocram_vbase);
+	void __iomem *ocram_vbase;
+};
+
+struct imx_gpcv2 {
+	struct imx_gpcv2_irq *irqchip;
+	struct imx_gpcv2_suspend *pm;
+};
+
+void ca7_cpu_resume(void);
+void imx7_suspend(void __iomem *ocram_vbase);
+
+#endif  /* __SOC_IMX_GPCV2_H__ */
-- 
2.5.0.rc2

[PATCH v6 1/2] irqchip: imx-gpcv2: IMX GPCv2 driver for wakeup sources

[Thomas Gleixner]

On Wed, 22 Jul 2015, Shenwei Wang wrote:
> +static int imx_gpcv2_irq_set_wake(struct irq_data *d, unsigned int on)
> +{
> +	struct imx_gpcv2_irq *cd = d->chip_data;
> +	unsigned int idx = d->hwirq / 32;
> +	unsigned long flags;
> +	void __iomem *reg;
> +	u32 mask, val;
> +
> +	raw_spin_lock_irqsave(&cd->lock.rlock, flags);

Oh no. You need to make cd->lock a raw_spinlock and then use
raw_spin_lock_irqsave() on it. How on earth did you come up with this
hackery?

Thanks,

	tglx

[PATCH v6 1/2] irqchip: imx-gpcv2: IMX GPCv2 driver for wakeup sources

[Shenwei Wang]

> -----Original Message-----
> From: Thomas Gleixner [mailto:tglx at linutronix.de]
> Sent: 2015?7?26? 6:48
> To: Wang Shenwei-B38339
> Cc: shawn.guo at linaro.org; jason at lakedaemon.net;
> linux-arm-kernel at lists.infradead.org; linux-kernel at vger.kernel.org; Huang
> Yongcai-B20788
> Subject: Re: [PATCH v6 1/2] irqchip: imx-gpcv2: IMX GPCv2 driver for wakeup
> sources
> 
> On Wed, 22 Jul 2015, Shenwei Wang wrote:
> > +static int imx_gpcv2_irq_set_wake(struct irq_data *d, unsigned int
> > +on) {
> > +	struct imx_gpcv2_irq *cd = d->chip_data;
> > +	unsigned int idx = d->hwirq / 32;
> > +	unsigned long flags;
> > +	void __iomem *reg;
> > +	u32 mask, val;
> > +
> > +	raw_spin_lock_irqsave(&cd->lock.rlock, flags);
> 
> Oh no. You need to make cd->lock a raw_spinlock and then use
> raw_spin_lock_irqsave() on it. How on earth did you come up with this hackery?

I was thinking to use one spin_lock between the current two modules. But it should be 
okay to use a dedicate one for irqchip.

> Thanks,
> 
> 	tglx

[PATCH v6 1/2] irqchip: imx-gpcv2: IMX GPCv2 driver for wakeup sources

[Shawn Guo]

On Wed, Jul 22, 2015 at 12:07:38PM -0500, Shenwei Wang wrote:
> diff --git a/include/soc/imx/gpcv2.h b/include/soc/imx/gpcv2.h
> new file mode 100644
> index 0000000..73d6e75
> --- /dev/null
> +++ b/include/soc/imx/gpcv2.h

I do not like this header, which couples imx7d irqchip and pm driver so
much.  Can you please elaborate why we have to have this header?

Shawn

> @@ -0,0 +1,163 @@
> +/*
> + * Copyright (C) 2015 Freescale Semiconductor, Inc.
> + *
> + * This program is free software; you can redistribute it and/or modify
> + * it under the terms of the GNU General Public License version 2 as
> + * published by the Free Software Foundation.
> + */
> +
> +#ifndef __SOC_IMX_GPCV2_H__
> +#define __SOC_IMX_GPCV2_H__
> +
> +
> +#define IMR_NUM			4
> +#define GPC_MAX_IRQS            (IMR_NUM * 32)
> +
> +#define GPC_LPCR_A7_BSC		0x0
> +#define GPC_LPCR_M4		0x8
> +
> +#define GPC_IMR1_CORE0		0x30
> +#define GPC_IMR1_CORE1		0x40
> +
> +#define GPC_PGC_CPU_MAPPING	0xec
> +#define GPC_PGC_SCU_TIMING	0x890
> +
> +#define BM_LPCR_A7_BSC_IRQ_SRC_A7_WAKEUP	0x70000000
> +#define BM_LPCR_M4_MASK_DSM_TRIGGER		0x80000000
> +
> +
> +#define GPC_LPCR_A7_AD		0x4
> +#define GPC_SLPCR		0x14
> +#define GPC_PGC_ACK_SEL_A7	0x24
> +
> +#define GPC_SLOT0_CFG		0xb0
> +
> +#define GPC_PGC_C0		0x800
> +#define GPC_PGC_SCU_TIMING	0x890
> +#define GPC_PGC_C1		0x840
> +#define GPC_PGC_SCU		0x880
> +#define GPC_PGC_FM		0xa00
> +
> +#define BM_LPCR_A7_BSC_CPU_CLK_ON_LPM		0x4000
> +#define BM_LPCR_A7_BSC_LPM1			0xc
> +#define BM_LPCR_A7_BSC_LPM0			0x3
> +#define BP_LPCR_A7_BSC_LPM1			2
> +#define BP_LPCR_A7_BSC_LPM0			0
> +
> +#define BM_SLPCR_EN_DSM				0x80000000
> +#define BM_SLPCR_RBC_EN				0x40000000
> +#define BM_SLPCR_VSTBY				0x4
> +#define BM_SLPCR_SBYOS				0x2
> +#define BM_SLPCR_BYPASS_PMIC_READY		0x1
> +
> +
> +#define BM_LPCR_A7_AD_L2PGE			0x10000
> +#define BM_LPCR_A7_AD_EN_C1_PUP			0x800
> +#define BM_LPCR_A7_AD_EN_C1_IRQ_PUP		0x400
> +#define BM_LPCR_A7_AD_EN_C0_PUP			0x200
> +#define BM_LPCR_A7_AD_EN_C0_IRQ_PUP		0x100
> +#define BM_LPCR_A7_AD_EN_PLAT_PDN		0x10
> +#define BM_LPCR_A7_AD_EN_C1_PDN			0x8
> +#define BM_LPCR_A7_AD_EN_C1_WFI_PDN		0x4
> +#define BM_LPCR_A7_AD_EN_C0_PDN			0x2
> +#define BM_LPCR_A7_AD_EN_C0_WFI_PDN		0x1
> +
> +#define BM_GPC_PGC_ACK_SEL_A7_DUMMY_PUP_ACK	0x80000000
> +#define BM_GPC_PGC_ACK_SEL_A7_DUMMY_PDN_ACK	0x8000
> +
> +#define MAX_SLOT_NUMBER				10
> +#define A7_LPM_WAIT				0x5
> +#define A7_LPM_STOP				0xa
> +
> +
> +#define REG_SET		0x4
> +#define REG_CLR		0x8
> +
> +#define ANADIG_ARM_PLL		0x60
> +#define ANADIG_DDR_PLL		0x70
> +#define ANADIG_SYS_PLL		0xb0
> +#define ANADIG_ENET_PLL		0xe0
> +#define ANADIG_AUDIO_PLL	0xf0
> +#define ANADIG_VIDEO_PLL	0x130
> +
> +
> +enum gpcv2_mode {
> +	WAIT_CLOCKED,
> +	WAIT_UNCLOCKED,
> +	WAIT_UNCLOCKED_POWER_OFF,
> +	STOP_POWER_ON,
> +	STOP_POWER_OFF,
> +};
> +
> +
> +/* GPCv2 has the following power domains, and each domain can be power-up
> + * and power-down via GPC settings.
> + *
> + * 	Core 0 of A7 power domain
> + * 	Core1 of A7 power domain
> + * 	SCU/L2 cache RAM of A7 power domain
> + * 	Fastmix and megamix power domain
> + * 	USB OTG1 PHY power domain
> + * 	USB OTG2 PHY power domain
> + * 	PCIE PHY power domain
> + * 	USB HSIC PHY power domain
> + *	Core 0 of M4 power domain
> + */
> +enum gpcv2_slot {
> +	CORE0_A7,
> +	CORE1_A7,
> +	SCU_A7,
> +	FAST_MEGA_MIX,
> +	MIPI_PHY,
> +	PCIE_PHY,
> +	USB_OTG1_PHY,
> +	USB_OTG2_PHY,
> +	USB_HSIC_PHY,
> +	CORE0_M4,
> +};
> +
> +struct imx_gpcv2;
> +
> +struct imx_gpcv2_irq {
> +	spinlock_t lock;
> +	void __iomem *gpc_base;
> +	u32 wakeup_sources[IMR_NUM];
> +	u32 enabled_irqs[IMR_NUM];
> +	u32 cpu2wakeup;
> +};
> +
> +struct imx_gpcv2_suspend {
> +	struct regmap *anatop;
> +	struct regmap *imx_src;
> +	u32 mfmix_mask[IMR_NUM];
> +	u32 wakeupmix_mask[IMR_NUM];
> +	u32 lpsrmix_mask[IMR_NUM];
> +
> +	void (*set_mode)(struct imx_gpcv2 *, enum gpcv2_mode mode);
> +	void (*lpm_cpu_power_gate)(struct imx_gpcv2 *, u32, bool);
> +	void (*lpm_plat_power_gate)(struct imx_gpcv2 *, bool);
> +	void (*lpm_env_setup)(struct imx_gpcv2 *);
> +	void (*lpm_env_clean)(struct imx_gpcv2 *);
> +
> +	void (*set_slot)(struct imx_gpcv2 *cd, u32 index,
> +			enum gpcv2_slot m_core, bool mode, bool ack);
> +	void (*clear_slots)(struct imx_gpcv2 *);
> +	void (*lpm_enable_core)(struct imx_gpcv2 *,
> +			bool enable, u32 offset);
> +
> +	void (*standby)(struct imx_gpcv2 *);
> +	void (*suspend)(struct imx_gpcv2 *);
> +
> +	void (*suspend_fn_in_ocram)(void __iomem *ocram_vbase);
> +	void __iomem *ocram_vbase;
> +};
> +
> +struct imx_gpcv2 {
> +	struct imx_gpcv2_irq *irqchip;
> +	struct imx_gpcv2_suspend *pm;
> +};
> +
> +void ca7_cpu_resume(void);
> +void imx7_suspend(void __iomem *ocram_vbase);
> +
> +#endif  /* __SOC_IMX_GPCV2_H__ */
> -- 
> 2.5.0.rc2
> 
> 
> 
> _______________________________________________
> linux-arm-kernel mailing list
> linux-arm-kernel at lists.infradead.org
> http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
> 

[PATCH v6 1/2] irqchip: imx-gpcv2: IMX GPCv2 driver for wakeup sources

[Shenwei Wang]

> -----Original Message-----
> From: Shawn Guo [mailto:shawnguo at kernel.org]
> Sent: 2015?7?27? 8:41
> To: Wang Shenwei-B38339
> Cc: shawn.guo at linaro.org; tglx at linutronix.de; jason at lakedaemon.net; Huang
> Yongcai-B20788; linux-kernel at vger.kernel.org;
> linux-arm-kernel at lists.infradead.org
> Subject: Re: [PATCH v6 1/2] irqchip: imx-gpcv2: IMX GPCv2 driver for wakeup
> sources
> 
> On Wed, Jul 22, 2015 at 12:07:38PM -0500, Shenwei Wang wrote:
> > diff --git a/include/soc/imx/gpcv2.h b/include/soc/imx/gpcv2.h new
> > file mode 100644 index 0000000..73d6e75
> > --- /dev/null
> > +++ b/include/soc/imx/gpcv2.h
> 
> I do not like this header, which couples imx7d irqchip and pm driver so
> much.  Can you please elaborate why we have to have this header?

PM driver does depend on the irqchip driver. It needs some input like enabled irqs and
wakeup irqs to decide which module to be powered off in low power states. I am also
considering if the header file could be removed or not. So far it seems a common place
to define a structure which is used in both drivers is still required.

Thanks,
Shenwei
 


> Shawn
> 
> > @@ -0,0 +1,163 @@
> > +/*
> > + * Copyright (C) 2015 Freescale Semiconductor, Inc.
> > + *
> > + * This program is free software; you can redistribute it and/or modify
> > + * it under the terms of the GNU General Public License version 2 as
> > + * published by the Free Software Foundation.
> > + */
> > +
> > +#ifndef __SOC_IMX_GPCV2_H__
> > +#define __SOC_IMX_GPCV2_H__
> > +
> > +
> > +#define IMR_NUM			4
> > +#define GPC_MAX_IRQS            (IMR_NUM * 32)
> > +
> > +#define GPC_LPCR_A7_BSC		0x0
> > +#define GPC_LPCR_M4		0x8
> > +
> > +#define GPC_IMR1_CORE0		0x30
> > +#define GPC_IMR1_CORE1		0x40
> > +
> > +#define GPC_PGC_CPU_MAPPING	0xec
> > +#define GPC_PGC_SCU_TIMING	0x890
> > +
> > +#define BM_LPCR_A7_BSC_IRQ_SRC_A7_WAKEUP	0x70000000
> > +#define BM_LPCR_M4_MASK_DSM_TRIGGER		0x80000000
> > +
> > +
> >

[PATCH v6 1/2] irqchip: imx-gpcv2: IMX GPCv2 driver for wakeup sources

[Shawn Guo]

On Mon, Jul 27, 2015 at 02:13:37PM +0000, Shenwei Wang wrote:
> > -----Original Message-----
> > From: Shawn Guo [mailto:shawnguo at kernel.org]
> > Sent: 2015?7?27? 8:41
> > To: Wang Shenwei-B38339
> > Cc: shawn.guo at linaro.org; tglx at linutronix.de; jason at lakedaemon.net; Huang
> > Yongcai-B20788; linux-kernel at vger.kernel.org;
> > linux-arm-kernel at lists.infradead.org
> > Subject: Re: [PATCH v6 1/2] irqchip: imx-gpcv2: IMX GPCv2 driver for wakeup
> > sources
> > 
> > On Wed, Jul 22, 2015 at 12:07:38PM -0500, Shenwei Wang wrote:
> > > diff --git a/include/soc/imx/gpcv2.h b/include/soc/imx/gpcv2.h new
> > > file mode 100644 index 0000000..73d6e75
> > > --- /dev/null
> > > +++ b/include/soc/imx/gpcv2.h
> > 
> > I do not like this header, which couples imx7d irqchip and pm driver so
> > much.  Can you please elaborate why we have to have this header?
> 
> PM driver does depend on the irqchip driver. It needs some input like enabled irqs and
> wakeup irqs to decide which module to be powered off in low power states. I am also
> considering if the header file could be removed or not. So far it seems a common place
> to define a structure which is used in both drivers is still required.

Please be more specific.  Trimming the header down to the macros and
structures/fields that are necessary to be in the header might be a good
idea.  And then we can go through them one by one to see if there is a
way to avoid them being in the header.

Shawn

[PATCH v6 1/2] irqchip: imx-gpcv2: IMX GPCv2 driver for wakeup sources

[Shenwei Wang]

> -----Original Message-----
> From: Shawn Guo [mailto:shawnguo at kernel.org]
> Sent: 2015?7?27? 9:35
> To: Wang Shenwei-B38339
> Cc: jason at lakedaemon.net; Huang Yongcai-B20788;
> linux-kernel at vger.kernel.org; tglx at linutronix.de; shawn.guo at linaro.org;
> linux-arm-kernel at lists.infradead.org
> Subject: Re: [PATCH v6 1/2] irqchip: imx-gpcv2: IMX GPCv2 driver for wakeup
> sources
> > > On Wed, Jul 22, 2015 at 12:07:38PM -0500, Shenwei Wang wrote:
> > > > diff --git a/include/soc/imx/gpcv2.h b/include/soc/imx/gpcv2.h new
> > > > file mode 100644 index 0000000..73d6e75
> > > > --- /dev/null
> > > > +++ b/include/soc/imx/gpcv2.h
> > >
> > > I do not like this header, which couples imx7d irqchip and pm driver
> > > so much.  Can you please elaborate why we have to have this header?
> >
> > PM driver does depend on the irqchip driver. It needs some input like
> > enabled irqs and wakeup irqs to decide which module to be powered off
> > in low power states. I am also considering if the header file could be
> > removed or not. So far it seems a common place to define a structure which is
> used in both drivers is still required.
> 
> Please be more specific.  Trimming the header down to the macros and
> structures/fields that are necessary to be in the header might be a good idea.
> And then we can go through them one by one to see if there is a way to avoid
> them being in the header.

The following structure is currently used in both drivers. The members "gpc_base/
wakeup_sources/enabled_irqs" are now shared to PM driver. And the macro IMR_NUM
will be referred by both drivers too.
 
struct imx_gpcv2_irq {
	spinlock_t lock;
	void __iomem *gpc_base;
	u32 wakeup_sources[IMR_NUM];
	u32 enabled_irqs[IMR_NUM];
	u32 cpu2wakeup;
};

Thanks,
Shenwei

> Shawn

[PATCH v6 1/2] irqchip: imx-gpcv2: IMX GPCv2 driver for wakeup sources

[Shawn Guo]

On Mon, Jul 27, 2015 at 02:50:15PM +0000, Shenwei Wang wrote:
> The following structure is currently used in both drivers. The members "gpc_base/
> wakeup_sources/enabled_irqs" are now shared to PM driver. And the macro IMR_NUM
> will be referred by both drivers too.
>  
> struct imx_gpcv2_irq {
> 	spinlock_t lock;
> 	void __iomem *gpc_base;

So this is the virtual base used by both irqchip and pm driver, and the
lock is for register access protection, right?  If so, we can define gpc
as a syscon device, and access it from both drivers with regmap.

> 	u32 wakeup_sources[IMR_NUM];

This should be an irqchip internal data and exported to external users like
pm code with an interface like imx_gpcv2_get_wakeup_sources().

> 	u32 enabled_irqs[IMR_NUM];

I do not see how this is used in pm driver.

> 	u32 cpu2wakeup;

The only use of this in pm driver is to unmask interrupt #32 during
initialization.  Why cannot it be done in irqchip driver initialization?

Shawn

> };

[PATCH v6 1/2] irqchip: imx-gpcv2: IMX GPCv2 driver for wakeup sources

[Shenwei Wang]

> -----Original Message-----
> From: Shawn Guo [mailto:shawnguo at kernel.org]
> Sent: 2015?7?27? 19:48
> To: Wang Shenwei-B38339
> Cc: jason at lakedaemon.net; Huang Yongcai-B20788;
> linux-kernel at vger.kernel.org; tglx at linutronix.de; shawn.guo at linaro.org;
> linux-arm-kernel at lists.infradead.org
> Subject: Re: [PATCH v6 1/2] irqchip: imx-gpcv2: IMX GPCv2 driver for wakeup
> sources
> 
> On Mon, Jul 27, 2015 at 02:50:15PM +0000, Shenwei Wang wrote:
> > The following structure is currently used in both drivers. The members
> > "gpc_base/ wakeup_sources/enabled_irqs" are now shared to PM driver.
> > And the macro IMR_NUM will be referred by both drivers too.
> >
> > struct imx_gpcv2_irq {
> > 	spinlock_t lock;
> > 	void __iomem *gpc_base;
> 
> So this is the virtual base used by both irqchip and pm driver, and the lock is for
> register access protection, right?  If so, we can define gpc as a syscon device,
> and access it from both drivers with regmap.

Regmap can be a solution too.

> > 	u32 wakeup_sources[IMR_NUM];
> 
> This should be an irqchip internal data and exported to external users like pm
> code with an interface like imx_gpcv2_get_wakeup_sources().

Okay.

> > 	u32 enabled_irqs[IMR_NUM];


> I do not see how this is used in pm driver.
> 
> > 	u32 cpu2wakeup;
> 
> The only use of this in pm driver is to unmask interrupt #32 during initialization.
> Why cannot it be done in irqchip driver initialization?

Right. This line should be moved to irqchip driver.

Thanks.
Shenwei 

> Shawn
> 
> > };

[PATCH v6 2/2] ARM: imx: Add suspend codes for imx7D

[Shenwei Wang]

IMX7D contains a new version of GPC IP block (GPCv2). It has two
major functions: power management and wakeup source management.

GPCv2 provides low power mode control for Cortex-A7 and Cortex-M4
domains. And it can support WAIT, STOP, and DSM(Deep Sleep Mode) modes.
After configuring the GPCv2 module, the platform can enter into a
selected mode either automatically triggered by ARM WFI instruction or
manually by software. The system will exit the low power states
by the predefined wakeup sources which are managed by the gpcv2
irqchip driver.

This patch adds a new suspend driver to manage the power states on IMX7D.
It currently supports "SUSPEND_STANDBY" and "SUSPEND_MEM" states.

Signed-off-by: Shenwei Wang <shenwei.wang@freescale.com>
Signed-off-by: Anson Huang <b20788@freescale.com>
---
 arch/arm/mach-imx/Kconfig        |   1 +
 arch/arm/mach-imx/Makefile       |   2 +
 arch/arm/mach-imx/pm-imx7.c      | 765 +++++++++++++++++++++++++++++++++++++++
 arch/arm/mach-imx/suspend-imx7.S | 529 +++++++++++++++++++++++++++
 4 files changed, 1297 insertions(+)
 create mode 100644 arch/arm/mach-imx/pm-imx7.c
 create mode 100644 arch/arm/mach-imx/suspend-imx7.S

diff --git a/arch/arm/mach-imx/Kconfig b/arch/arm/mach-imx/Kconfig
index 5ccc9ea..4269c1e 100644
--- a/arch/arm/mach-imx/Kconfig
+++ b/arch/arm/mach-imx/Kconfig
@@ -552,6 +552,7 @@ config SOC_IMX7D
 	bool "i.MX7 Dual support"
 	select PINCTRL_IMX7D
 	select ARM_GIC
+	select IMX_GPCV2
 	select HAVE_IMX_ANATOP
 	select HAVE_IMX_MMDC
 	help
diff --git a/arch/arm/mach-imx/Makefile b/arch/arm/mach-imx/Makefile
index 37c502a..b2ad476 100644
--- a/arch/arm/mach-imx/Makefile
+++ b/arch/arm/mach-imx/Makefile
@@ -87,6 +87,8 @@ obj-$(CONFIG_SOC_IMX7D) += mach-imx7d.o
 
 ifeq ($(CONFIG_SUSPEND),y)
 AFLAGS_suspend-imx6.o :=-Wa,-march=armv7-a
+AFLAGS_suspend-imx7.o :=-Wa,-march=armv7-a
+obj-$(CONFIG_IMX_GPCV2)	+= suspend-imx7.o pm-imx7.o
 obj-$(CONFIG_SOC_IMX6) += suspend-imx6.o
 obj-$(CONFIG_SOC_IMX53) += suspend-imx53.o
 endif
diff --git a/arch/arm/mach-imx/pm-imx7.c b/arch/arm/mach-imx/pm-imx7.c
new file mode 100644
index 0000000..50b9af4
--- /dev/null
+++ b/arch/arm/mach-imx/pm-imx7.c
@@ -0,0 +1,765 @@
+
+/*
+ * Copyright (C) 2015 Freescale Semiconductor, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/of_address.h>
+#include <linux/of_irq.h>
+#include <linux/mfd/syscon.h>
+#include <linux/regmap.h>
+#include <linux/slab.h>
+
+#include <linux/suspend.h>
+#include <asm/suspend.h>
+#include <asm/fncpy.h>
+
+#include <soc/imx/gpcv2.h>
+
+extern struct imx_gpcv2_irq *gpcv2_irq_instance;
+static struct imx_gpcv2 *gpcv2_instance;
+
+static void imx_gpcv2_lpm_clear_slots(struct imx_gpcv2 *gpc)
+{
+	struct imx_gpcv2_irq *cd = gpc->irqchip;
+	unsigned long flags;
+	int i;
+
+	spin_lock_irqsave(&cd->lock, flags);
+	for (i = 0; i < MAX_SLOT_NUMBER; i++)
+		writel_relaxed(0x0, cd->gpc_base + GPC_SLOT0_CFG + i * 0x4);
+	writel_relaxed(BM_GPC_PGC_ACK_SEL_A7_DUMMY_PUP_ACK |
+		BM_GPC_PGC_ACK_SEL_A7_DUMMY_PDN_ACK,
+		cd->gpc_base + GPC_PGC_ACK_SEL_A7);
+
+	spin_unlock_irqrestore(&cd->lock, flags);
+}
+
+static void imx_gpcv2_lpm_enable_core(struct imx_gpcv2 *gpc,
+			bool enable, u32 offset)
+{
+	struct imx_gpcv2_irq *cd = gpc->irqchip;
+	unsigned long flags;
+
+	spin_lock_irqsave(&cd->lock, flags);
+	writel_relaxed(enable, cd->gpc_base + offset);
+	spin_unlock_irqrestore(&cd->lock, flags);
+}
+
+static void imx_gpcv2_lpm_slot_setup(struct imx_gpcv2 *gpc,
+		u32 index, enum gpcv2_slot m_core, bool mode, bool ack)
+{
+	struct imx_gpcv2_irq *cd = gpc->irqchip;
+	unsigned long flags;
+	u32 val;
+
+	if (index >= MAX_SLOT_NUMBER)
+		pr_err("Invalid slot index!\n");
+
+	spin_lock_irqsave(&cd->lock, flags);
+	/* set slot */
+	writel_relaxed((mode + 1) << (m_core * 2), cd->gpc_base +
+		GPC_SLOT0_CFG + index * 4);
+
+	if (ack) {
+		/* set ack */
+		val = readl_relaxed(cd->gpc_base + GPC_PGC_ACK_SEL_A7);
+		/* clear dummy ack */
+		val &= ~(1 << (15 + (mode ? 16 : 0)));
+		val |= 1 << (m_core + (mode ? 16 : 0));
+		writel_relaxed(val, cd->gpc_base + GPC_PGC_ACK_SEL_A7);
+	}
+
+	spin_unlock_irqrestore(&cd->lock, flags);
+}
+
+static void imx_gpcv2_lpm_env_setup(struct imx_gpcv2 *gpc)
+{
+	struct imx_gpcv2_suspend *pm = gpc->pm;
+
+	/* PLL and PFDs overwrite set */
+	regmap_write(pm->anatop, ANADIG_ARM_PLL + REG_SET, 1 << 20);
+	regmap_write(pm->anatop, ANADIG_DDR_PLL + REG_SET, 1 << 19);
+	regmap_write(pm->anatop, ANADIG_SYS_PLL + REG_SET, 0x1ff << 17);
+	regmap_write(pm->anatop, ANADIG_ENET_PLL + REG_SET, 1 << 13);
+	regmap_write(pm->anatop, ANADIG_AUDIO_PLL + REG_SET, 1 << 24);
+	regmap_write(pm->anatop, ANADIG_VIDEO_PLL + REG_SET, 1 << 24);
+}
+
+static void imx_gpcv2_lpm_env_clean(struct imx_gpcv2 *gpc)
+{
+	struct imx_gpcv2_suspend *pm = gpc->pm;
+
+	/* PLL and PFDs overwrite clear */
+	regmap_write(pm->anatop, ANADIG_ARM_PLL + REG_CLR, 1 << 20);
+	regmap_write(pm->anatop, ANADIG_DDR_PLL + REG_CLR, 1 << 19);
+	regmap_write(pm->anatop, ANADIG_SYS_PLL + REG_CLR, 0x1ff << 17);
+	regmap_write(pm->anatop, ANADIG_ENET_PLL + REG_CLR, 1 << 13);
+	regmap_write(pm->anatop, ANADIG_AUDIO_PLL + REG_CLR, 1 << 24);
+	regmap_write(pm->anatop, ANADIG_VIDEO_PLL + REG_CLR, 1 << 24);
+}
+
+static void imx_gpcv2_lpm_set_mode(struct imx_gpcv2 *gpc,
+		enum gpcv2_mode mode)
+{
+	struct imx_gpcv2_irq *cd = gpc->irqchip;
+	unsigned long flags;
+	u32 val1, val2;
+
+	spin_lock_irqsave(&cd->lock, flags);
+
+	val1 = readl_relaxed(cd->gpc_base + GPC_LPCR_A7_BSC);
+	val2 = readl_relaxed(cd->gpc_base + GPC_SLPCR);
+
+	/* all cores' LPM settings must be same */
+	val1 &= ~(BM_LPCR_A7_BSC_LPM0 | BM_LPCR_A7_BSC_LPM1);
+
+	val1 |= BM_LPCR_A7_BSC_CPU_CLK_ON_LPM;
+
+	val2 &= ~(BM_SLPCR_EN_DSM | BM_SLPCR_VSTBY | BM_SLPCR_RBC_EN |
+		BM_SLPCR_SBYOS | BM_SLPCR_BYPASS_PMIC_READY);
+	/*
+	 * GPCv2: When improper low-power sequence is used,
+	 * the SoC enters low power mode before the ARM core executes WFI.
+	 *
+	 * Software workaround:
+	 * 1) Software should trigger IRQ #32 (IOMUX) to be always pending
+	 *    by setting IOMUX_GPR1_IRQ.
+	 * 2) Software should then unmask IRQ #32 in GPC before setting GPC
+	 *    Low-Power mode.
+	 * 3) Software should mask IRQ #32 right after GPC Low-Power mode
+	 *    is set.
+	 */
+	switch (mode) {
+	case WAIT_CLOCKED:
+		break;
+	case WAIT_UNCLOCKED:
+		val1 |= A7_LPM_WAIT << BP_LPCR_A7_BSC_LPM0;
+		val1 &= ~BM_LPCR_A7_BSC_CPU_CLK_ON_LPM;
+		break;
+	case STOP_POWER_ON:
+		val1 |= A7_LPM_STOP << BP_LPCR_A7_BSC_LPM0;
+		val1 &= ~BM_LPCR_A7_BSC_CPU_CLK_ON_LPM;
+		val2 |= BM_SLPCR_EN_DSM;
+		val2 |= BM_SLPCR_RBC_EN;
+		val2 |= BM_SLPCR_BYPASS_PMIC_READY;
+		break;
+	case STOP_POWER_OFF:
+		val1 |= A7_LPM_STOP << BP_LPCR_A7_BSC_LPM0;
+		val1 &= ~BM_LPCR_A7_BSC_CPU_CLK_ON_LPM;
+		val2 |= BM_SLPCR_EN_DSM;
+		val2 |= BM_SLPCR_RBC_EN;
+		val2 |= BM_SLPCR_SBYOS;
+		val2 |= BM_SLPCR_VSTBY;
+		val2 |= BM_SLPCR_BYPASS_PMIC_READY;
+		break;
+	default:
+		return;
+	}
+	writel_relaxed(val1, cd->gpc_base + GPC_LPCR_A7_BSC);
+	writel_relaxed(val2, cd->gpc_base + GPC_SLPCR);
+
+	spin_unlock_irqrestore(&cd->lock, flags);
+}
+
+
+static void imx_gpcv2_lpm_cpu_power_gate(struct imx_gpcv2 *gpc,
+				u32 cpu, bool pdn)
+{
+	struct imx_gpcv2_irq *cd = gpc->irqchip;
+	unsigned long flags;
+	u32 val;
+
+	const u32 val_pdn[2] = {
+		BM_LPCR_A7_AD_EN_C0_PDN | BM_LPCR_A7_AD_EN_C0_PUP,
+		BM_LPCR_A7_AD_EN_C1_PDN | BM_LPCR_A7_AD_EN_C1_PUP,
+	};
+
+	spin_lock_irqsave(&cd->lock, flags);
+
+	val = readl_relaxed(cd->gpc_base + GPC_LPCR_A7_AD);
+	if (pdn)
+		val |= val_pdn[cpu];
+	else
+		val &= ~val_pdn[cpu];
+
+	writel_relaxed(val, cd->gpc_base + GPC_LPCR_A7_AD);
+	spin_unlock_irqrestore(&cd->lock, flags);
+}
+
+static void imx_lpm_plat_power_gate(struct imx_gpcv2 *gpc, bool pdn)
+{
+	struct imx_gpcv2_irq *cd = gpc->irqchip;
+	unsigned long flags;
+	u32 val;
+
+	spin_lock_irqsave(&cd->lock, flags);
+	val = readl_relaxed(cd->gpc_base + GPC_LPCR_A7_AD);
+	val &= ~(BM_LPCR_A7_AD_EN_PLAT_PDN | BM_LPCR_A7_AD_L2PGE);
+	if (pdn)
+		val |= BM_LPCR_A7_AD_EN_PLAT_PDN | BM_LPCR_A7_AD_L2PGE;
+
+	writel_relaxed(val, cd->gpc_base + GPC_LPCR_A7_AD);
+	spin_unlock_irqrestore(&cd->lock, flags);
+}
+
+static void imx_gpcv2_lpm_standby(struct imx_gpcv2 *gpc)
+{
+	struct imx_gpcv2_suspend *pm = gpc->pm;
+
+	pm->lpm_env_setup(gpc);
+	/* pm->set_mode(gpc, STOP_POWER_OFF); */
+	pm->set_mode(gpc, WAIT_UNCLOCKED);
+
+	pr_debug("[GPCv2] %s %d\r\n", __func__, __LINE__);
+	/* Zzz ... */
+	cpu_do_idle();
+
+	pm->set_mode(gpc, WAIT_CLOCKED);
+	pm->lpm_env_clean(gpc);
+}
+
+
+
+static int gpcv2_suspend_finish(unsigned long val)
+{
+	struct imx_gpcv2_suspend *pm = (struct imx_gpcv2_suspend *)val;
+
+	if (!pm->suspend_fn_in_ocram) {
+		cpu_do_idle();
+	} else {
+		/*
+		 * call low level suspend function in ocram,
+		 * as we need to float DDR IO.
+		 */
+		local_flush_tlb_all();
+		pm->suspend_fn_in_ocram(pm->ocram_vbase);
+	}
+
+	return 0;
+}
+static void imx_gpcv2_lpm_suspend(struct imx_gpcv2 *gpc)
+{
+	struct imx_gpcv2_suspend *pm = gpc->pm;
+	struct imx_gpcv2_irq *cd = gpc->irqchip;
+	int i = 0;
+
+	pm->lpm_env_setup(gpc);
+	pm->set_mode(gpc, STOP_POWER_OFF);
+
+	/* enable core0 power down/up with low power mode */
+	pm->lpm_cpu_power_gate(gpc, 0, true);
+
+	/* enable plat power down with low power mode */
+	pm->lpm_plat_power_gate(gpc, true);
+
+
+	/*
+	 * To avoid confuse, we use slot 0~4 for power down,
+	 * slot 5~9 for power up.
+	 *
+	 * Power down slot sequence:
+	 * Slot0 -> CORE0
+	 * Slot1 -> Mega/Fast MIX
+	 * Slot2 -> SCU
+	 *
+	 * Power up slot sequence:
+	 * Slot5 -> Mega/Fast MIX
+	 * Slot6 -> SCU
+	 * Slot7 -> CORE0
+	 */
+	pm->set_slot(gpc, 0, CORE0_A7, false, false);
+	pm->set_slot(gpc, 2, SCU_A7, false, true);
+
+	for (i = 0; i < IMR_NUM; i++) {
+		if ((~cd->wakeup_sources[i] & pm->mfmix_mask[i]) != 0)
+			break;
+
+		pm->set_slot(gpc, 1, FAST_MEGA_MIX, false, false);
+		pm->set_slot(gpc, 5, FAST_MEGA_MIX, true, false);
+		pm->lpm_enable_core(gpc, true, GPC_PGC_FM);
+		break;
+	}
+
+	pm->set_slot(gpc, 6, SCU_A7, true, false);
+	pm->set_slot(gpc, 7, CORE0_A7, true, true);
+
+	/* enable core0, scu */
+	pm->lpm_enable_core(gpc, true, GPC_PGC_C0);
+	pm->lpm_enable_core(gpc, true, GPC_PGC_SCU);
+
+	/* Suspend to MEM has not been implemented yet */
+	cpu_suspend((unsigned long)pm, gpcv2_suspend_finish);
+
+	pm->lpm_env_clean(gpc);
+	pm->set_mode(gpc, WAIT_CLOCKED);
+	pm->lpm_cpu_power_gate(gpc, 0, false);
+	pm->lpm_plat_power_gate(gpc, false);
+
+	pm->lpm_enable_core(gpc, false, GPC_PGC_C0);
+	pm->lpm_enable_core(gpc, false, GPC_PGC_SCU);
+	pm->lpm_enable_core(gpc, false, GPC_PGC_FM);
+	pm->clear_slots(gpc);
+}
+
+static int imx_gpcv2_pm_enter(suspend_state_t state)
+{
+	struct imx_gpcv2_suspend *pm;
+
+	BUG_ON(!gpcv2_instance);
+	pm = gpcv2_instance->pm;
+
+	switch (state) {
+	case PM_SUSPEND_STANDBY:
+		pm->standby(gpcv2_instance);
+		break;
+
+	case PM_SUSPEND_MEM:
+		pm->suspend(gpcv2_instance);
+		break;
+	default:
+		return -EINVAL;
+	}
+
+	return 0;
+}
+
+
+static int imx_gpcv2_pm_valid(suspend_state_t state)
+{
+	return state == PM_SUSPEND_MEM || state == PM_SUSPEND_STANDBY;
+}
+
+static const struct platform_suspend_ops imx_gpcv2_pm_ops = {
+	.enter = imx_gpcv2_pm_enter,
+	.valid = imx_gpcv2_pm_valid,
+};
+
+
+#define MX7_MAX_DDRC_NUM		32
+#define MX7_MAX_DDRC_PHY_NUM		16
+
+#define READ_DATA_FROM_HARDWARE		0
+#define MX7_SUSPEND_OCRAM_SIZE		0x1000
+
+struct imx7_pm_base {
+	phys_addr_t pbase;
+	void __iomem *vbase;
+};
+
+struct imx7_pm_socdata {
+	u32 ddr_type;
+	const char *ddrc_compat;
+	const char *ddrc_phy_compat;
+	const char *src_compat;
+	const char *iomuxc_gpr_compat;
+	const char *ccm_compat;
+	const char *gpc_compat;
+	const char *anatop_compat;
+	const u32 ddrc_num;
+	const u32 (*ddrc_offset)[2];
+	const u32 ddrc_phy_num;
+	const u32 (*ddrc_phy_offset)[2];
+};
+
+/*
+ * This structure is for passing necessary data for low level ocram
+ * suspend code(arch/arm/mach-imx/suspend-imx7.S), if this struct
+ * definition is changed, the offset definition in
+ * arch/arm/mach-imx/suspend-imx7.S must be also changed accordingly,
+ * otherwise, the suspend to ocram function will be broken!
+ */
+struct imx7_cpu_pm_info {
+	u32 m4_reserve0;
+	u32 m4_reserve1;
+	u32 m4_reserve2;
+
+	/* The physical address of pm_info. */
+	phys_addr_t pbase;
+
+	/* The physical resume address for asm code */
+	phys_addr_t resume_addr;
+	u32 ddr_type;
+
+	u32 pm_info_size;
+	struct imx7_pm_base ddrc_base;
+	struct imx7_pm_base ddrc_phy_base;
+	struct imx7_pm_base src_base;
+	struct imx7_pm_base iomuxc_gpr_base;
+	struct imx7_pm_base ccm_base;
+	struct imx7_pm_base gpc_base;
+	struct imx7_pm_base l2_base;
+	struct imx7_pm_base anatop_base;
+	u32 ttbr1;
+
+	/* Number of DDRC which need saved/restored. */
+	u32 ddrc_num;
+
+	/* To save offset and value */
+	u32 ddrc_val[MX7_MAX_DDRC_NUM][2];
+
+	/* Number of DDRC which need saved/restored. */
+	u32 ddrc_phy_num;
+
+	/* To save offset and value */
+	u32 ddrc_phy_val[MX7_MAX_DDRC_NUM][2];
+} __aligned(8);
+
+
+static int __init imx_get_base_from_node(struct device_node *node,
+			struct imx7_pm_base *base)
+{
+	struct resource res;
+	int ret = 0;
+
+	ret = of_address_to_resource(node, 0, &res);
+	if (ret)
+		goto put_node;
+
+	base->pbase = res.start;
+	base->vbase = ioremap(res.start, resource_size(&res));
+	if (!base->vbase) {
+		iounmap(base->vbase);
+		ret = -ENOMEM;
+	}
+put_node:
+	of_node_put(node);
+
+	return ret;
+}
+
+static int __init imx_get_base_from_dt(struct imx7_pm_base *base,
+				const char *compat)
+{
+	struct device_node *node;
+	struct resource res;
+	int ret = 0;
+
+	node = of_find_compatible_node(NULL, NULL, compat);
+	if (!node) {
+		ret = -ENODEV;
+		goto out;
+	}
+
+	ret = of_address_to_resource(node, 0, &res);
+	if (ret)
+		goto put_node;
+
+	base->pbase = res.start;
+	base->vbase = ioremap(res.start, resource_size(&res));
+	if (!base->vbase)
+		ret = -ENOMEM;
+
+put_node:
+	of_node_put(node);
+out:
+	return ret;
+}
+
+static int __init imx_get_exec_base_from_dt(struct imx7_pm_base *base,
+				const char *compat)
+{
+	struct device_node *node;
+	struct resource res;
+	int ret = 0;
+
+	node = of_find_compatible_node(NULL, NULL, compat);
+	if (!node) {
+		ret = -ENODEV;
+		goto out;
+	}
+
+	ret = of_address_to_resource(node, 0, &res);
+	if (ret)
+		goto put_node;
+
+	base->pbase = res.start;
+	base->vbase = __arm_ioremap_exec(res.start, resource_size(&res), false);
+
+	if (!base->vbase)
+		ret = -ENOMEM;
+
+put_node:
+	of_node_put(node);
+out:
+	return ret;
+}
+
+static const u32 imx7d_ddrc_ddr3_setting[][2] __initconst = {
+	{ 0x0, READ_DATA_FROM_HARDWARE },
+	{ 0x1a0, READ_DATA_FROM_HARDWARE },
+	{ 0x1a4, READ_DATA_FROM_HARDWARE },
+	{ 0x1a8, READ_DATA_FROM_HARDWARE },
+	{ 0x64, READ_DATA_FROM_HARDWARE },
+	{ 0x490, 0x00000001 },
+	{ 0xd0, 0xc0020001 },
+	{ 0xd4, READ_DATA_FROM_HARDWARE },
+	{ 0xdc, READ_DATA_FROM_HARDWARE },
+	{ 0xe0, READ_DATA_FROM_HARDWARE },
+	{ 0xe4, READ_DATA_FROM_HARDWARE },
+	{ 0xf4, READ_DATA_FROM_HARDWARE },
+	{ 0x100, READ_DATA_FROM_HARDWARE },
+	{ 0x104, READ_DATA_FROM_HARDWARE },
+	{ 0x108, READ_DATA_FROM_HARDWARE },
+	{ 0x10c, READ_DATA_FROM_HARDWARE },
+	{ 0x110, READ_DATA_FROM_HARDWARE },
+	{ 0x114, READ_DATA_FROM_HARDWARE },
+	{ 0x120, 0x03030803 },
+	{ 0x180, READ_DATA_FROM_HARDWARE },
+	{ 0x190, READ_DATA_FROM_HARDWARE },
+	{ 0x194, READ_DATA_FROM_HARDWARE },
+	{ 0x200, READ_DATA_FROM_HARDWARE },
+	{ 0x204, READ_DATA_FROM_HARDWARE },
+	{ 0x214, READ_DATA_FROM_HARDWARE },
+	{ 0x218, READ_DATA_FROM_HARDWARE },
+	{ 0x240, 0x06000601 },
+	{ 0x244, READ_DATA_FROM_HARDWARE },
+};
+
+static const u32 imx7d_ddrc_phy_ddr3_setting[][2] __initconst = {
+	{ 0x0, READ_DATA_FROM_HARDWARE },
+	{ 0x4, READ_DATA_FROM_HARDWARE },
+	{ 0x10, READ_DATA_FROM_HARDWARE },
+	{ 0x9c, READ_DATA_FROM_HARDWARE },
+	{ 0x20, READ_DATA_FROM_HARDWARE },
+	{ 0x30, READ_DATA_FROM_HARDWARE },
+	{ 0x50, 0x01000010 },
+	{ 0x50, 0x00000010 },
+	{ 0xc0, 0x0e407304 },
+	{ 0xc0, 0x0e447304 },
+	{ 0xc0, 0x0e447306 },
+	{ 0xc0, 0x0e447304 },
+	{ 0xc0, 0x0e407306 },
+};
+
+static const struct imx7_pm_socdata imx7d_pm_data_ddr3 __initconst = {
+	.ddrc_compat = "fsl,imx7d-ddrc",
+	.ddrc_phy_compat = "fsl,imx7d-ddrc-phy",
+	.ccm_compat = "fsl,imx7d-ccm",
+	.src_compat = "fsl,imx7d-src",
+	.iomuxc_gpr_compat = "fsl,imx7d-iomuxc",
+	.gpc_compat = "fsl,imx7d-gpc",
+	.anatop_compat = "fsl,imx7d-anatop",
+	.ddrc_num = ARRAY_SIZE(imx7d_ddrc_ddr3_setting),
+	.ddrc_offset = imx7d_ddrc_ddr3_setting,
+	.ddrc_phy_num = ARRAY_SIZE(imx7d_ddrc_phy_ddr3_setting),
+	.ddrc_phy_offset = imx7d_ddrc_phy_ddr3_setting,
+};
+
+
+static int __init imx_gpcv2_suspend_init(struct imx_gpcv2_suspend *pm,
+			const struct imx7_pm_socdata *socdata)
+{
+	struct imx7_pm_base aips_base[3] = { {0, 0}, {0, 0}, {0, 0} };
+	struct imx7_pm_base sram_base = {0, 0};
+	struct imx7_cpu_pm_info *pm_info;
+	struct device_node *node;
+	int i, ret = 0;
+
+	const u32 (*ddrc_offset_array)[2];
+	const u32 (*ddrc_phy_offset_array)[2];
+
+	if (!socdata || !pm) {
+		pr_warn("%s: invalid argument!\n", __func__);
+		return -EINVAL;
+	}
+
+	node = NULL;
+	for (i = 0; i < 3; i++) {
+		node = of_find_compatible_node(node, NULL, "fsl,aips-bus");
+		if (!node) {
+			pr_warn("%s: failed to find aips %d node!\n",
+					__func__, i);
+			break;
+		}
+		ret = imx_get_base_from_node(node, &aips_base[i]);
+		if (ret) {
+			pr_warn("%s: failed to get aips[%d] base %d!\n",
+					__func__, i, ret);
+		}
+	}
+
+	ret = imx_get_exec_base_from_dt(&sram_base, "fsl,lpm-sram");
+	if (ret) {
+		pr_warn("%s: failed to get lpm-sram base %d!\n",
+				__func__, ret);
+		goto lpm_sram_map_failed;
+	}
+
+	pm_info = sram_base.vbase;
+	pm_info->pbase = sram_base.pbase;
+	pm_info->resume_addr = virt_to_phys(ca7_cpu_resume);
+	pm_info->pm_info_size = sizeof(*pm_info);
+
+	ret = imx_get_base_from_dt(&pm_info->ccm_base, socdata->ccm_compat);
+	if (ret) {
+		pr_warn("%s: failed to get ccm base %d!\n", __func__, ret);
+		goto ccm_map_failed;
+	}
+
+
+	ret = imx_get_base_from_dt(&pm_info->ddrc_base, socdata->ddrc_compat);
+	if (ret) {
+		pr_warn("%s: failed to get ddrc base %d!\n", __func__, ret);
+		goto ddrc_map_failed;
+	}
+
+	ret = imx_get_base_from_dt(&pm_info->ddrc_phy_base,
+				socdata->ddrc_phy_compat);
+	if (ret) {
+		pr_warn("%s: failed to get ddrc_phy base %d!\n", __func__, ret);
+		goto ddrc_phy_map_failed;
+	}
+
+
+	ret = imx_get_base_from_dt(&pm_info->src_base, socdata->src_compat);
+	if (ret) {
+		pr_warn("%s: failed to get src base %d!\n", __func__, ret);
+		goto src_map_failed;
+	}
+
+	ret = imx_get_base_from_dt(&pm_info->iomuxc_gpr_base,
+				socdata->iomuxc_gpr_compat);
+	if (ret) {
+		pr_warn("%s: failed to get iomuxc_gpr base %d!\n",
+					__func__, ret);
+		goto iomuxc_gpr_map_failed;
+	}
+
+	ret = imx_get_base_from_dt(&pm_info->gpc_base, socdata->gpc_compat);
+	if (ret) {
+		pr_warn("%s: failed to get gpc base %d!\n", __func__, ret);
+		goto gpc_map_failed;
+	}
+
+	ret = imx_get_base_from_dt(&pm_info->anatop_base,
+				socdata->anatop_compat);
+	if (ret) {
+		pr_warn("%s: failed to get anatop base %d!\n", __func__, ret);
+		goto anatop_map_failed;
+	}
+
+	pm_info->ddrc_num = socdata->ddrc_num;
+	ddrc_offset_array = socdata->ddrc_offset;
+	pm_info->ddrc_phy_num = socdata->ddrc_phy_num;
+	ddrc_phy_offset_array = socdata->ddrc_phy_offset;
+
+	/* initialize DDRC settings */
+	for (i = 0; i < pm_info->ddrc_num; i++) {
+		pm_info->ddrc_val[i][0] = ddrc_offset_array[i][0];
+		if (ddrc_offset_array[i][1] == READ_DATA_FROM_HARDWARE)
+			pm_info->ddrc_val[i][1] =
+				readl_relaxed(pm_info->ddrc_base.vbase +
+				ddrc_offset_array[i][0]);
+		else
+			pm_info->ddrc_val[i][1] = ddrc_offset_array[i][1];
+	}
+
+	/* initialize DDRC PHY settings */
+	for (i = 0; i < pm_info->ddrc_phy_num; i++) {
+		pm_info->ddrc_phy_val[i][0] =
+			ddrc_phy_offset_array[i][0];
+		if (ddrc_phy_offset_array[i][1] == READ_DATA_FROM_HARDWARE)
+			pm_info->ddrc_phy_val[i][1] =
+				readl_relaxed(pm_info->ddrc_phy_base.vbase +
+				ddrc_phy_offset_array[i][0]);
+		else
+			pm_info->ddrc_phy_val[i][1] =
+				ddrc_phy_offset_array[i][1];
+	}
+
+	pm->suspend_fn_in_ocram = fncpy(
+		sram_base.vbase + sizeof(*pm_info),
+		&imx7_suspend,
+		MX7_SUSPEND_OCRAM_SIZE - sizeof(*pm_info));
+	pm->ocram_vbase = sram_base.vbase;
+
+	goto put_node;
+
+anatop_map_failed:
+	iounmap(pm_info->anatop_base.vbase);
+gpc_map_failed:
+	iounmap(pm_info->gpc_base.vbase);
+iomuxc_gpr_map_failed:
+	iounmap(pm_info->iomuxc_gpr_base.vbase);
+src_map_failed:
+	iounmap(pm_info->src_base.vbase);
+ddrc_phy_map_failed:
+	iounmap(pm_info->ddrc_phy_base.vbase);
+ddrc_map_failed:
+	iounmap(pm_info->ddrc_base.vbase);
+ccm_map_failed:
+	iounmap(pm_info->ccm_base.vbase);
+lpm_sram_map_failed:
+	iounmap(sram_base.vbase);
+put_node:
+	of_node_put(node);
+
+	return ret;
+}
+
+static int __init imx_gpcv2_pm_init(void)
+{
+	struct imx_gpcv2_suspend *pm;
+	struct imx_gpcv2_irq *cd;
+	struct imx_gpcv2 *gpc;
+
+	pm = kzalloc(sizeof(struct imx_gpcv2_suspend), GFP_KERNEL);
+	gpc = kzalloc(sizeof(struct imx_gpcv2), GFP_KERNEL);
+	cd = gpcv2_irq_instance;
+
+	if (!cd || !pm || !gpc) {
+		pr_debug("[GPCv2] %s init failed\r\n", __func__);
+		return 0;
+	}
+
+
+	imx_gpcv2_suspend_init(pm, &imx7d_pm_data_ddr3);
+
+	pm->lpm_env_setup = imx_gpcv2_lpm_env_setup;
+	pm->lpm_env_clean = imx_gpcv2_lpm_env_clean;
+
+	pm->lpm_cpu_power_gate = imx_gpcv2_lpm_cpu_power_gate;
+	pm->lpm_plat_power_gate = imx_lpm_plat_power_gate;
+	pm->lpm_enable_core = imx_gpcv2_lpm_enable_core;
+	pm->set_mode = imx_gpcv2_lpm_set_mode;
+
+	pm->clear_slots = imx_gpcv2_lpm_clear_slots;
+	pm->set_slot = imx_gpcv2_lpm_slot_setup;
+
+	pm->standby = imx_gpcv2_lpm_standby;
+	pm->suspend = imx_gpcv2_lpm_suspend;
+
+	pr_debug("[GPCv2] %s \r\n", __func__);
+	pm->anatop = syscon_regmap_lookup_by_compatible("fsl,imx6q-anatop");
+	WARN_ON(!pm->anatop);
+	pm->imx_src = syscon_regmap_lookup_by_compatible("fsl,imx7d-src");
+	WARN_ON(!pm->imx_src);
+
+	/*
+	 * Due to hardware design failure, need to make sure GPR
+	 * interrupt(#32) is unmasked during RUN mode to avoid entering
+	 * DSM by mistake.
+	 */
+	writel_relaxed(~0x1, cd->gpc_base + cd->cpu2wakeup);
+
+	/* Mask the wakeup sources in M/F power domain */
+	pm->mfmix_mask[0] = 0x54010000;
+	pm->mfmix_mask[1] = 0xc00;
+	pm->mfmix_mask[2] = 0x0;
+	pm->mfmix_mask[3] = 0x400010;
+
+	gpc->pm = pm;
+	gpc->irqchip = cd;
+	gpcv2_instance = gpc;
+
+	suspend_set_ops(&imx_gpcv2_pm_ops);
+
+	return 0;
+}
+
+device_initcall(imx_gpcv2_pm_init);
+
diff --git a/arch/arm/mach-imx/suspend-imx7.S b/arch/arm/mach-imx/suspend-imx7.S
new file mode 100644
index 0000000..8c3f516
--- /dev/null
+++ b/arch/arm/mach-imx/suspend-imx7.S
@@ -0,0 +1,529 @@
+/*
+ * Copyright (C) 2015 Freescale Semiconductor, Inc.
+ *
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+
+#include <linux/linkage.h>
+#include <asm/asm-offsets.h>
+#include "hardware.h"
+
+/*
+ * ==================== low level suspend ====================
+ *
+ * Better to follow below rules to use ARM registers:
+ * r0: pm_info structure address;
+ * r1 ~ r4: for saving pm_info members;
+ * r5 ~ r10: free registers;
+ * r11: io base address.
+ *
+ * suspend ocram space layout:
+ * ======================== high address ======================
+ *                              .
+ *                              .
+ *                              .
+ *                              ^
+ *                              ^
+ *                              ^
+ *                      imx7_suspend code
+ *              PM_INFO structure(imx7_cpu_pm_info)
+ * ======================== low address =======================
+ */
+
+/*
+ * Below offsets are based on struct imx7_cpu_pm_info
+ * which defined in arch/arm/mach-imx/pm-imx7.c, this
+ * structure contains necessary pm info for low level
+ * suspend related code.
+ */
+#define PM_INFO_M4_RESERVE0_OFFSET		0x0
+#define PM_INFO_M4_RESERVE1_OFFSET		0x4
+#define PM_INFO_M4_RESERVE2_OFFSET		0x8
+#define PM_INFO_PBASE_OFFSET			0xc
+#define PM_INFO_RESUME_ADDR_OFFSET		0x10
+#define PM_INFO_DDR_TYPE_OFFSET			0x14
+#define PM_INFO_PM_INFO_SIZE_OFFSET		0x18
+#define PM_INFO_MX7_DDRC_P_OFFSET		0x1c
+#define PM_INFO_MX7_DDRC_V_OFFSET		0x20
+#define PM_INFO_MX7_DDRC_PHY_P_OFFSET		0x24
+#define PM_INFO_MX7_DDRC_PHY_V_OFFSET		0x28
+#define PM_INFO_MX7_SRC_P_OFFSET		0x2c
+#define PM_INFO_MX7_SRC_V_OFFSET		0x30
+#define PM_INFO_MX7_IOMUXC_GPR_P_OFFSET		0x34
+#define PM_INFO_MX7_IOMUXC_GPR_V_OFFSET		0x38
+#define PM_INFO_MX7_CCM_P_OFFSET		0x3c
+#define PM_INFO_MX7_CCM_V_OFFSET		0x40
+#define PM_INFO_MX7_GPC_P_OFFSET		0x44
+#define PM_INFO_MX7_GPC_V_OFFSET		0x48
+#define PM_INFO_MX7_L2_P_OFFSET			0x4c
+#define PM_INFO_MX7_L2_V_OFFSET			0x50
+#define PM_INFO_MX7_ANATOP_P_OFFSET		0x54
+#define PM_INFO_MX7_ANATOP_V_OFFSET		0x58
+#define PM_INFO_MX7_TTBR1_V_OFFSET		0x5c
+#define PM_INFO_DDRC_REG_NUM_OFFSET		0x60
+#define PM_INFO_DDRC_REG_OFFSET			0x64
+#define PM_INFO_DDRC_VALUE_OFFSET		0x68
+#define PM_INFO_DDRC_PHY_REG_NUM_OFFSET		0x164
+#define PM_INFO_DDRC_PHY_REG_OFFSET		0x168
+#define PM_INFO_DDRC_PHY_VALUE_OFFSET		0x16c
+
+#define MX7_SRC_GPR1	0x74
+#define MX7_SRC_GPR2	0x78
+#define GPC_PGC_FM	0xa00
+#define ANADIG_SNVS_MISC_CTRL	0x380
+#define DDRC_STAT	0x4
+#define DDRC_PWRCTL	0x30
+#define DDRC_PSTAT	0x3fc
+#define DDRC_PCTRL_0	0x490
+#define DDRC_DFIMISC	0x1b0
+#define DDRC_SWCTL	0x320
+#define DDRC_SWSTAT	0x324
+#define DDRPHY_LP_CON0	0x18
+
+	.align 3
+
+	.macro	disable_l1_dcache
+
+	/*
+	 * Flush all data from the L1 data cache before disabling
+	 * SCTLR.C bit.
+	 */
+	push	{r0 - r10, lr}
+	ldr	r7, =v7_flush_dcache_all
+	mov	lr, pc
+	mov	pc, r7
+	pop	{r0 - r10, lr}
+
+	/* disable d-cache */
+	mrc	p15, 0, r7, c1, c0, 0
+	bic	r7, r7, #(1 << 2)
+	mcr	p15, 0, r7, c1, c0, 0
+	dsb
+	isb
+
+	push	{r0 - r10, lr}
+	ldr	r7, =v7_flush_dcache_all
+	mov	lr, pc
+	mov	pc, r7
+	pop	{r0 - r10, lr}
+
+	.endm
+
+
+	.macro enable_l1_dcache
+
+	/* Enable L1 data cache. */
+	mrc	p15, 0, r6, c1, c0, 0
+	orr	r6, r6, #0x4
+	mcr	p15, 0, r6, c1, c0, 0
+
+	dsb
+	isb
+
+	.endm
+
+
+	.macro ddrc_enter_self_refresh
+
+	ldr	r11, [r0, #PM_INFO_MX7_DDRC_V_OFFSET]
+
+	/* let DDR out of self-refresh */
+	ldr	r7, =0x0
+	str	r7, [r11, #DDRC_PWRCTL]
+
+	/* wait rw port_busy clear */
+	ldr	r6, =(0x1 << 16)
+	orr	r6, r6, #0x1
+1:
+	ldr	r7, [r11, #DDRC_PSTAT]
+	ands	r7, r7, r6
+	bne	1b
+
+	/* enter self-refresh bit 5 */
+	ldr	r7, =(0x1 << 5)
+	str	r7, [r11, #DDRC_PWRCTL]
+
+	/* wait until self-refresh mode entered */
+2:
+	ldr	r7, [r11, #DDRC_STAT]
+	and	r7, r7, #0x3
+	cmp	r7, #0x3
+	bne	2b
+3:
+	ldr	r7, [r11, #DDRC_STAT]
+	ands	r7, r7, #0x20
+	beq	3b
+
+	/* disable dram clk */
+	ldr	r7, [r11, #DDRC_PWRCTL]
+	orr	r7, r7, #(1 << 3)
+	str	r7, [r11, #DDRC_PWRCTL]
+
+	.endm
+
+	.macro ddrc_exit_self_refresh
+
+	cmp	r5, #0x0
+	ldreq	r11, [r0, #PM_INFO_MX7_DDRC_V_OFFSET]
+	ldrne	r11, [r0, #PM_INFO_MX7_DDRC_P_OFFSET]
+
+	/* let DDR out of self-refresh */
+	ldr	r7, =0x0
+	str	r7, [r11, #DDRC_PWRCTL]
+
+	/* wait until self-refresh mode entered */
+4:
+	ldr	r7, [r11, #DDRC_STAT]
+	and	r7, r7, #0x3
+	cmp	r7, #0x3
+	beq	4b
+
+	/* enable auto self-refresh */
+	ldr	r7, [r11, #DDRC_PWRCTL]
+	orr	r7, r7, #(1 << 0)
+	str	r7, [r11, #DDRC_PWRCTL]
+
+	.endm
+
+	.macro wait_delay
+5:
+	subs	r6, r6, #0x1
+	bne	5b
+
+	.endm
+
+	.macro ddr_enter_retention
+
+	ldr	r11, [r0, #PM_INFO_MX7_DDRC_V_OFFSET]
+
+	/* let DDR out of self-refresh */
+	ldr	r7, =0x0
+	str	r7, [r11, #DDRC_PCTRL_0]
+
+	/* wait rw port_busy clear */
+	ldr	r6, =(0x1 << 16)
+	orr	r6, r6, #0x1
+6:
+	ldr	r7, [r11, #DDRC_PSTAT]
+	ands	r7, r7, r6
+	bne	6b
+
+	ldr	r11, [r0, #PM_INFO_MX7_DDRC_V_OFFSET]
+	/* enter self-refresh bit 5 */
+	ldr	r7, =(0x1 << 5)
+	str	r7, [r11, #DDRC_PWRCTL]
+
+	/* wait until self-refresh mode entered */
+7:
+	ldr	r7, [r11, #DDRC_STAT]
+	and	r7, r7, #0x3
+	cmp	r7, #0x3
+	bne	7b
+8:
+	ldr	r7, [r11, #DDRC_STAT]
+	ands	r7, r7, #0x20
+	beq	8b
+
+	/* disable dram clk */
+	ldr	r7, =(0x1 << 5)
+	orr	r7, r7, #(1 << 3)
+	str	r7, [r11, #DDRC_PWRCTL]
+
+	/* reset ddr_phy  */
+	ldr	r11, [r0, #PM_INFO_MX7_ANATOP_V_OFFSET]
+	ldr	r7, =0x0
+	str	r7, [r11, #ANADIG_SNVS_MISC_CTRL]
+
+	/* delay 7 us */
+	ldr	r6, =6000
+	wait_delay
+
+	ldr	r11, [r0, #PM_INFO_MX7_SRC_V_OFFSET]
+	ldr	r6, =0x1000
+	ldr	r7, [r11, r6]
+	orr	r7, r7, #0x1
+	str	r7, [r11, r6]
+	/* turn off ddr power */
+	ldr	r11, [r0, #PM_INFO_MX7_ANATOP_V_OFFSET]
+	ldr	r7, =(0x1 << 29)
+	str	r7, [r11, #ANADIG_SNVS_MISC_CTRL]
+
+	.endm
+
+	.macro ddr_exit_retention
+
+	cmp	r5, #0x0
+	ldreq	r1, [r0, #PM_INFO_MX7_ANATOP_V_OFFSET]
+	ldrne	r1, [r0, #PM_INFO_MX7_ANATOP_P_OFFSET]
+	ldreq	r2, [r0, #PM_INFO_MX7_SRC_V_OFFSET]
+	ldrne	r2, [r0, #PM_INFO_MX7_SRC_P_OFFSET]
+	ldreq	r3, [r0, #PM_INFO_MX7_DDRC_V_OFFSET]
+	ldrne	r3, [r0, #PM_INFO_MX7_DDRC_P_OFFSET]
+	ldreq	r4, [r0, #PM_INFO_MX7_DDRC_PHY_V_OFFSET]
+	ldrne	r4, [r0, #PM_INFO_MX7_DDRC_PHY_P_OFFSET]
+	ldreq	r10, [r0, #PM_INFO_MX7_CCM_V_OFFSET]
+	ldrne	r10, [r0, #PM_INFO_MX7_CCM_P_OFFSET]
+	ldreq	r11, [r0, #PM_INFO_MX7_IOMUXC_GPR_V_OFFSET]
+	ldrne	r11, [r0, #PM_INFO_MX7_IOMUXC_GPR_P_OFFSET]
+
+	/* turn on ddr power */
+	ldr	r7, =(0x1 << 29)
+	str	r7, [r1, #ANADIG_SNVS_MISC_CTRL]
+
+	ldr	r6, =50
+	wait_delay
+
+	ldr	r7, =0x0
+	str	r7, [r1, #ANADIG_SNVS_MISC_CTRL]
+
+	/* clear ddr_phy reset */
+	ldr	r6, =0x1000
+	ldr	r7, [r2, r6]
+	orr	r7, r7, #0x3
+	str	r7, [r2, r6]
+	ldr	r7, [r2, r6]
+	bic	r7, r7, #0x1
+	str	r7, [r2, r6]
+
+	ldr	r6, [r0, #PM_INFO_DDRC_REG_NUM_OFFSET]
+	ldr	r7, =PM_INFO_DDRC_REG_OFFSET
+	add	r7, r7, r0
+9:
+	ldr	r8, [r7], #0x4
+	ldr	r9, [r7], #0x4
+	str	r9, [r3, r8]
+	subs	r6, r6, #0x1
+	bne	9b
+	ldr	r7, =0x20
+	str	r7, [r3, #DDRC_PWRCTL]
+	ldr	r7, =0x0
+	str	r7, [r3, #DDRC_DFIMISC]
+
+	/* do PHY, clear ddr_phy reset */
+	ldr	r6, =0x1000
+	ldr	r7, [r2, r6]
+	bic	r7, r7, #0x2
+	str	r7, [r2, r6]
+
+	ldr	r7, =(0x1 << 30)
+	str	r7, [r1, #ANADIG_SNVS_MISC_CTRL]
+
+	/* need to delay ~5mS */
+	ldr	r6, =0x100000
+	wait_delay
+
+	ldr	r6, [r0, #PM_INFO_DDRC_PHY_REG_NUM_OFFSET]
+	ldr	r7, =PM_INFO_DDRC_PHY_REG_OFFSET
+	add	r7, r7, r0
+
+10:
+	ldr	r8, [r7], #0x4
+	ldr	r9, [r7], #0x4
+	str	r9, [r4, r8]
+	subs	r6, r6, #0x1
+	bne	10b
+
+	ldr	r7, =0x0
+	add	r9, r10, #0x4000
+	str	r7, [r9, #0x130]
+
+	cmp	r5, #0x0
+	beq	101f
+	ldr	r7, =0x170
+	orr	r7, r7, #0x8
+	str	r7, [r11, #0x20]
+
+101:
+	ldr	r7, =0x2
+	add	r9, r10, #0x4000
+	str	r7, [r9, #0x130]
+
+	ldr	r7, =0xf
+	str	r7, [r4, #DDRPHY_LP_CON0]
+
+	/* wait until self-refresh mode entered */
+11:
+	ldr	r7, [r3, #DDRC_STAT]
+	and	r7, r7, #0x3
+	cmp	r7, #0x3
+	bne	11b
+	ldr	r7, =0x0
+	str	r7, [r3, #DDRC_SWCTL]
+	ldr	r7, =0x1
+	str	r7, [r3, #DDRC_DFIMISC]
+	ldr	r7, =0x1
+	str	r7, [r3, #DDRC_SWCTL]
+12:
+	ldr	r7, [r3, #DDRC_SWSTAT]
+	and	r7, r7, #0x1
+	cmp	r7, #0x1
+	bne	12b
+13:
+	ldr	r7, [r3, #DDRC_STAT]
+	and	r7, r7, #0x20
+	cmp	r7, #0x20
+	bne	13b
+
+	/* let DDR out of self-refresh */
+	ldr	r7, =0x0
+	str	r7, [r3, #DDRC_PWRCTL]
+14:
+	ldr	r7, [r3, #DDRC_STAT]
+	and	r7, r7, #0x30
+	cmp	r7, #0x0
+	bne	14b
+
+15:
+	ldr	r7, [r3, #DDRC_STAT]
+	and	r7, r7, #0x3
+	cmp	r7, #0x1
+	bne	15b
+
+	/* enable port */
+	ldr	r7, =0x1
+	str	r7, [r3, #DDRC_PCTRL_0]
+
+	.endm
+
+ENTRY(imx7_suspend)
+	push	{r4-r12}
+
+	/*
+	 * The value of r0 is mapped the same in origin table and IRAM table,
+	 * thus no need to care r0 here.
+	 */
+	ldr	r1, [r0, #PM_INFO_PBASE_OFFSET]
+	ldr	r2, [r0, #PM_INFO_RESUME_ADDR_OFFSET]
+	ldr	r3, [r0, #PM_INFO_DDR_TYPE_OFFSET]
+	ldr	r4, [r0, #PM_INFO_PM_INFO_SIZE_OFFSET]
+
+	/*
+	 * counting the resume address in iram
+	 * to set it in SRC register.
+	 */
+	ldr	r6, =imx7_suspend
+	ldr	r7, =resume
+	sub	r7, r7, r6
+	add	r8, r1, r4
+	add	r9, r8, r7
+
+	ldr	r11, [r0, #PM_INFO_MX7_SRC_V_OFFSET]
+	/* store physical resume addr and pm_info address. */
+	str	r9, [r11, #MX7_SRC_GPR1]
+	str	r1, [r11, #MX7_SRC_GPR2]
+
+	disable_l1_dcache
+
+	/*
+	 * make sure TLB contain the addr we want,
+	 * as we will access them after DDR is in
+	 * self-refresh mode.
+	 */
+	ldr	r6, [r0, #PM_INFO_MX7_IOMUXC_GPR_V_OFFSET]
+	ldr	r7, [r0, #0x0]
+	ldr	r6, [r0, #PM_INFO_MX7_CCM_V_OFFSET]
+	add	r6, #0x4000
+	ldr	r7, [r6]
+	ldr	r6, [r0, #PM_INFO_MX7_ANATOP_V_OFFSET]
+	ldr	r7, [r6, #0x0]
+	ldr	r6, [r0, #PM_INFO_MX7_SRC_V_OFFSET]
+	ldr	r7, [r6, #0x0]
+	add	r6, #0x1000
+	ldr	r7, [r6]
+	ldr	r6, [r0, #PM_INFO_MX7_DDRC_V_OFFSET]
+	ldr	r7, [r6, #0x0]
+	ldr	r7, [r6, #0x490]
+	ldr	r6, [r0, #PM_INFO_MX7_DDRC_PHY_V_OFFSET]
+	ldr	r7, [r6, #0x0]
+
+	ldr	r11, [r0, #PM_INFO_MX7_GPC_V_OFFSET]
+	ldr	r7, [r11, #GPC_PGC_FM]
+	cmp	r7, #0
+	beq	ddr_only_self_refresh
+
+	ddr_enter_retention
+	b	ddr_retention_enter_out
+ddr_only_self_refresh:
+	ddrc_enter_self_refresh
+ddr_retention_enter_out:
+
+	/* Zzz, enter stop mode */
+	wfi
+	nop
+	nop
+	nop
+	nop
+
+	mov	r5, #0x0
+
+	ldr	r11, [r0, #PM_INFO_MX7_GPC_V_OFFSET]
+	ldr	r7, [r11, #GPC_PGC_FM]
+	cmp	r7, #0
+	beq	wfi_ddr_self_refresh_out
+
+	ddr_exit_retention
+	b	wfi_ddr_retention_out
+wfi_ddr_self_refresh_out:
+	ddrc_exit_self_refresh
+wfi_ddr_retention_out:
+
+	ldr	r11, [r0, #PM_INFO_MX7_IOMUXC_GPR_V_OFFSET]
+	ldr	r7, =0x170
+	orr	r7, r7, #0x8
+	str	r7, [r11, #0x20]
+
+	/* clear core0's entry and parameter */
+	ldr	r11, [r0, #PM_INFO_MX7_SRC_V_OFFSET]
+	mov	r7, #0x0
+	str	r7, [r11, #MX7_SRC_GPR1]
+	str	r7, [r11, #MX7_SRC_GPR2]
+
+	enable_l1_dcache
+
+	pop	{r4-r12}
+	/* return to suspend finish */
+	mov	pc, lr
+
+resume:
+	/* invalidate L1 I-cache first */
+	mov     r6, #0x0
+	mcr     p15, 0, r6, c7, c5, 0
+	mcr     p15, 0, r6, c7, c5, 6
+	/* enable the Icache and branch prediction */
+	mov     r6, #0x1800
+	mcr     p15, 0, r6, c1, c0, 0
+	isb
+
+	/* get physical resume address from pm_info. */
+	ldr	lr, [r0, #PM_INFO_RESUME_ADDR_OFFSET]
+	/* clear core0's entry and parameter */
+	ldr	r11, [r0, #PM_INFO_MX7_SRC_P_OFFSET]
+	mov	r7, #0x0
+	str	r7, [r11, #MX7_SRC_GPR1]
+	str	r7, [r11, #MX7_SRC_GPR2]
+
+	mov	r5, #0x1
+
+	ldr	r11, [r0, #PM_INFO_MX7_GPC_P_OFFSET]
+	ldr	r7, [r11, #GPC_PGC_FM]
+	cmp	r7, #0
+	beq	dsm_ddr_self_refresh_out
+
+	ddr_exit_retention
+	b	dsm_ddr_retention_out
+dsm_ddr_self_refresh_out:
+	ddrc_exit_self_refresh
+dsm_ddr_retention_out:
+
+	mov	pc, lr
+ENDPROC(imx7_suspend)
+
+ENTRY(ca7_cpu_resume)
+	bl	v7_invalidate_l1
+	b	cpu_resume
+ENDPROC(ca7_cpu_resume)
-- 
2.5.0.rc2

[PATCH v6 2/2] ARM: imx: Add suspend codes for imx7D

[Shawn Guo]

On Wed, Jul 22, 2015 at 12:07:39PM -0500, Shenwei Wang wrote:
> IMX7D contains a new version of GPC IP block (GPCv2). It has two
> major functions: power management and wakeup source management.
> 
> GPCv2 provides low power mode control for Cortex-A7 and Cortex-M4
> domains. And it can support WAIT, STOP, and DSM(Deep Sleep Mode) modes.
> After configuring the GPCv2 module, the platform can enter into a
> selected mode either automatically triggered by ARM WFI instruction or
> manually by software. The system will exit the low power states
> by the predefined wakeup sources which are managed by the gpcv2
> irqchip driver.
> 
> This patch adds a new suspend driver to manage the power states on IMX7D.
> It currently supports "SUSPEND_STANDBY" and "SUSPEND_MEM" states.
> 
> Signed-off-by: Shenwei Wang <shenwei.wang@freescale.com>
> Signed-off-by: Anson Huang <b20788@freescale.com>
> ---
>  arch/arm/mach-imx/Kconfig        |   1 +
>  arch/arm/mach-imx/Makefile       |   2 +
>  arch/arm/mach-imx/pm-imx7.c      | 765 +++++++++++++++++++++++++++++++++++++++
>  arch/arm/mach-imx/suspend-imx7.S | 529 +++++++++++++++++++++++++++
>  4 files changed, 1297 insertions(+)
>  create mode 100644 arch/arm/mach-imx/pm-imx7.c
>  create mode 100644 arch/arm/mach-imx/suspend-imx7.S
> 
> diff --git a/arch/arm/mach-imx/Kconfig b/arch/arm/mach-imx/Kconfig
> index 5ccc9ea..4269c1e 100644
> --- a/arch/arm/mach-imx/Kconfig
> +++ b/arch/arm/mach-imx/Kconfig
> @@ -552,6 +552,7 @@ config SOC_IMX7D
>  	bool "i.MX7 Dual support"
>  	select PINCTRL_IMX7D
>  	select ARM_GIC
> +	select IMX_GPCV2

Yes, the existing list is already a bit out of order, but please do not
make it worse.  Add it after HAVE_IMX_MMDC to keep them sort
alphabetically.

>  	select HAVE_IMX_ANATOP
>  	select HAVE_IMX_MMDC
>  	help
> diff --git a/arch/arm/mach-imx/Makefile b/arch/arm/mach-imx/Makefile
> index 37c502a..b2ad476 100644
> --- a/arch/arm/mach-imx/Makefile
> +++ b/arch/arm/mach-imx/Makefile
> @@ -87,6 +87,8 @@ obj-$(CONFIG_SOC_IMX7D) += mach-imx7d.o
>  
>  ifeq ($(CONFIG_SUSPEND),y)
>  AFLAGS_suspend-imx6.o :=-Wa,-march=armv7-a
> +AFLAGS_suspend-imx7.o :=-Wa,-march=armv7-a
> +obj-$(CONFIG_IMX_GPCV2)	+= suspend-imx7.o pm-imx7.o

Shouldn't it be controlled by CONFIG_SOC_IMX7D instead?

>  obj-$(CONFIG_SOC_IMX6) += suspend-imx6.o
>  obj-$(CONFIG_SOC_IMX53) += suspend-imx53.o
>  endif
> diff --git a/arch/arm/mach-imx/pm-imx7.c b/arch/arm/mach-imx/pm-imx7.c
> new file mode 100644
> index 0000000..50b9af4
> --- /dev/null
> +++ b/arch/arm/mach-imx/pm-imx7.c
> @@ -0,0 +1,765 @@
> +

Drop this new line.

> +/*
> + * Copyright (C) 2015 Freescale Semiconductor, Inc.
> + *
> + * This program is free software; you can redistribute it and/or modify
> + * it under the terms of the GNU General Public License version 2 as
> + * published by the Free Software Foundation.
> + */
> +
> +#include <linux/of_address.h>
> +#include <linux/of_irq.h>
> +#include <linux/mfd/syscon.h>
> +#include <linux/regmap.h>
> +#include <linux/slab.h>
> +

Ditto

> +#include <linux/suspend.h>
> +#include <asm/suspend.h>
> +#include <asm/fncpy.h>
> +
> +#include <soc/imx/gpcv2.h>
> +
> +extern struct imx_gpcv2_irq *gpcv2_irq_instance;

Will this give a checkpatch warning?

> +static struct imx_gpcv2 *gpcv2_instance;

I stop right here, as I need to understand why we need to have header
soc/imx/gpcv2.h shared between irqchip driver and pm code.

Shawn

[PATCH v6 2/2] ARM: imx: Add suspend codes for imx7D

[Shenwei Wang]

> -----Original Message-----
> From: Shawn Guo [mailto:shawnguo at kernel.org]
> Sent: 2015?7?27? 8:28
> To: Wang Shenwei-B38339
> Cc: shawn.guo at linaro.org; tglx at linutronix.de; jason at lakedaemon.net; Huang
> Yongcai-B20788; linux-kernel at vger.kernel.org;
> linux-arm-kernel at lists.infradead.org
> Subject: Re: [PATCH v6 2/2] ARM: imx: Add suspend codes for imx7D
> 
> > ---
> >  arch/arm/mach-imx/Kconfig        |   1 +
> >  arch/arm/mach-imx/Makefile       |   2 +
> >  arch/arm/mach-imx/pm-imx7.c      | 765
> +++++++++++++++++++++++++++++++++++++++
> >  arch/arm/mach-imx/suspend-imx7.S | 529 +++++++++++++++++++++++++++
> >  4 files changed, 1297 insertions(+)
> >  create mode 100644 arch/arm/mach-imx/pm-imx7.c  create mode 100644
> > arch/arm/mach-imx/suspend-imx7.S
> >
> > diff --git a/arch/arm/mach-imx/Kconfig b/arch/arm/mach-imx/Kconfig
> > index 5ccc9ea..4269c1e 100644
> > --- a/arch/arm/mach-imx/Kconfig
> > +++ b/arch/arm/mach-imx/Kconfig
> > @@ -552,6 +552,7 @@ config SOC_IMX7D
> >  	bool "i.MX7 Dual support"
> >  	select PINCTRL_IMX7D
> >  	select ARM_GIC
> > +	select IMX_GPCV2
> 
> Yes, the existing list is already a bit out of order, but please do not make it worse.
> Add it after HAVE_IMX_MMDC to keep them sort alphabetically.

Okay.
 
> >  	select HAVE_IMX_ANATOP
> >  	select HAVE_IMX_MMDC
> >  	help
> > diff --git a/arch/arm/mach-imx/Makefile b/arch/arm/mach-imx/Makefile
> > index 37c502a..b2ad476 100644
> > --- a/arch/arm/mach-imx/Makefile
> > +++ b/arch/arm/mach-imx/Makefile
> > @@ -87,6 +87,8 @@ obj-$(CONFIG_SOC_IMX7D) += mach-imx7d.o
> >
> >  ifeq ($(CONFIG_SUSPEND),y)
> >  AFLAGS_suspend-imx6.o :=-Wa,-march=armv7-a
> > +AFLAGS_suspend-imx7.o :=-Wa,-march=armv7-a
> > +obj-$(CONFIG_IMX_GPCV2)	+= suspend-imx7.o pm-imx7.o
> 
> Shouldn't it be controlled by CONFIG_SOC_IMX7D instead?

CONFIG_IMX_GPCV2 is more suitable here. As long as a SOC has the same GPCv2 block, the codes should be reused.
 

> >  obj-$(CONFIG_SOC_IMX6) += suspend-imx6.o
> >  obj-$(CONFIG_SOC_IMX53) += suspend-imx53.o  endif diff --git
> > a/arch/arm/mach-imx/pm-imx7.c b/arch/arm/mach-imx/pm-imx7.c new file
> > mode 100644 index 0000000..50b9af4
> > --- /dev/null
> > +++ b/arch/arm/mach-imx/pm-imx7.c
> > @@ -0,0 +1,765 @@
> > +
> 
> Drop this new line.
> 
> > +/*
> > + * Copyright (C) 2015 Freescale Semiconductor, Inc.
> > + *
> > + * This program is free software; you can redistribute it and/or
> > +modify
> > + * it under the terms of the GNU General Public License version 2 as
> > + * published by the Free Software Foundation.
> > + */
> > +
> > +#include <linux/of_address.h>
> > +#include <linux/of_irq.h>
> > +#include <linux/mfd/syscon.h>
> > +#include <linux/regmap.h>
> > +#include <linux/slab.h>
> > +
> 
> Ditto
> 
> > +#include <linux/suspend.h>
> > +#include <asm/suspend.h>
> > +#include <asm/fncpy.h>
> > +
> > +#include <soc/imx/gpcv2.h>
> > +
> > +extern struct imx_gpcv2_irq *gpcv2_irq_instance;
> 
> Will this give a checkpatch warning?

Yes. Any suggestion for that? Move it to a header file?

Thanks,
Shenwei

> > +static struct imx_gpcv2 *gpcv2_instance;
> 
> I stop right here, as I need to understand why we need to have header
> soc/imx/gpcv2.h shared between irqchip driver and pm code.
> 
> Shawn

[PATCH v6 2/2] ARM: imx: Add suspend codes for imx7D

[Shawn Guo]

On Mon, Jul 27, 2015 at 06:24:26PM +0000, Shenwei Wang wrote:
> > > @@ -87,6 +87,8 @@ obj-$(CONFIG_SOC_IMX7D) += mach-imx7d.o
> > >
> > >  ifeq ($(CONFIG_SUSPEND),y)
> > >  AFLAGS_suspend-imx6.o :=-Wa,-march=armv7-a
> > > +AFLAGS_suspend-imx7.o :=-Wa,-march=armv7-a
> > > +obj-$(CONFIG_IMX_GPCV2)	+= suspend-imx7.o pm-imx7.o
> > 
> > Shouldn't it be controlled by CONFIG_SOC_IMX7D instead?
> 
> CONFIG_IMX_GPCV2 is more suitable here. As long as a SOC has the same GPCv2 block, the codes should be reused.

Let's see what problem it will have.  Saying GPCv2 block is used on
imx8, we will have something like below.

obj-$(CONFIG_IMX_GPCV2) += suspend-imx7.o pm-imx7.o suspend-imx8.o pm-imx8.o

If people want to build a kernel with imx8 support only, suspend-imx7.o
and pm-imx7.o will also be built in there, which is undesirable.

The files are named with "-imx7".  It's a clear sign that the build of
the files should be controlled by something like related to "imx7".
Ideally, it should be CONFIG_SOC_IMX7.  Since imx7d is the only
supported imx7 soc and there is no CONFIG_SOC_IMX7 available so far,
it falls on CONFIG_SOC_IMX7D.

> > > +extern struct imx_gpcv2_irq *gpcv2_irq_instance;
> > 
> > Will this give a checkpatch warning?
> 
> Yes. Any suggestion for that? Move it to a header file?

Get rid of it.

Shawn

[PATCH v6 2/2] ARM: imx: Add suspend codes for imx7D

[Shenwei Wang]

> -----Original Message-----
> From: Shawn Guo [mailto:shawnguo at kernel.org]
> Sent: 2015?7?27? 20:03
> To: Wang Shenwei-B38339
> Cc: jason at lakedaemon.net; Huang Yongcai-B20788;
> linux-kernel at vger.kernel.org; tglx at linutronix.de; shawn.guo at linaro.org;
> linux-arm-kernel at lists.infradead.org
> Subject: Re: [PATCH v6 2/2] ARM: imx: Add suspend codes for imx7D
> 
> On Mon, Jul 27, 2015 at 06:24:26PM +0000, Shenwei Wang wrote:
> > > > @@ -87,6 +87,8 @@ obj-$(CONFIG_SOC_IMX7D) += mach-imx7d.o
> > > >
> > > >  ifeq ($(CONFIG_SUSPEND),y)
> > > >  AFLAGS_suspend-imx6.o :=-Wa,-march=armv7-a
> > > > +AFLAGS_suspend-imx7.o :=-Wa,-march=armv7-a
> > > > +obj-$(CONFIG_IMX_GPCV2)	+= suspend-imx7.o pm-imx7.o
> > >
> > > Shouldn't it be controlled by CONFIG_SOC_IMX7D instead?
> >
> > CONFIG_IMX_GPCV2 is more suitable here. As long as a SOC has the same
> GPCv2 block, the codes should be reused.
> 
> Let's see what problem it will have.  Saying GPCv2 block is used on imx8, we will
> have something like below.
> 
> obj-$(CONFIG_IMX_GPCV2) += suspend-imx7.o pm-imx7.o suspend-imx8.o
> pm-imx8.o

I don't think so. If imx8 use the same GPCv2 block, there should be no pm-imx8.o and suspend-imx8.o.
We should try to reuse the existing ones.
 
> If people want to build a kernel with imx8 support only, suspend-imx7.o and
> pm-imx7.o will also be built in there, which is undesirable.
> 
> The files are named with "-imx7".  It's a clear sign that the build of the files
> should be controlled by something like related to "imx7".
> Ideally, it should be CONFIG_SOC_IMX7.  Since imx7d is the only supported imx7
> soc and there is no CONFIG_SOC_IMX7 available so far, it falls on
> CONFIG_SOC_IMX7D.

We can also interpret "-imx7" is the first SoC which has the GPCv2 block. 

> > > > +extern struct imx_gpcv2_irq *gpcv2_irq_instance;
> > >
> > > Will this give a checkpatch warning?
> >
> > Yes. Any suggestion for that? Move it to a header file?
> 
> Get rid of it.

Then you may resolve the following compile error:

CC      arch/arm/mach-imx/pm-imx7.o
arch/arm/mach-imx/pm-imx7.c: In function ?imx_gpcv2_pm_init?:
arch/arm/mach-imx/pm-imx7.c:836:7: error: ?gpcv2_irq_instance? undeclared (first use in this function)
  cd = gpcv2_irq_instance;
       ^
arch/arm/mach-imx/pm-imx7.c:836:7: note: each undeclared identifier is reported only once for each function it appears in
make[1]: *** [arch/arm/mach-imx/pm-imx7.o] Error 1

Regards,
Shenwei

> Shawn

[PATCH v6 2/2] ARM: imx: Add suspend codes for imx7D

[Shawn Guo]

On Tue, Jul 28, 2015 at 02:16:20PM +0000, Shenwei Wang wrote:
> > The files are named with "-imx7".  It's a clear sign that the build of the files
> > should be controlled by something like related to "imx7".
> > Ideally, it should be CONFIG_SOC_IMX7.  Since imx7d is the only supported imx7
> > soc and there is no CONFIG_SOC_IMX7 available so far, it falls on
> > CONFIG_SOC_IMX7D.
> 
> We can also interpret "-imx7" is the first SoC which has the GPCv2 block. 

In that case you should name the block gpc-imx7d rather than gpcv2 and
symbol as GPC_IMX7D rather than IMX_GPCV2.

> > > > > +extern struct imx_gpcv2_irq *gpcv2_irq_instance;
> > > >
> > > > Will this give a checkpatch warning?
> > >
> > > Yes. Any suggestion for that? Move it to a header file?
> > 
> > Get rid of it.
> 
> Then you may resolve the following compile error:

You didn't get my point.  Rather than defining it as a global variable,
we should try to keep imx_gpcv2_irq as an internal data structure to
irqchip driver, and use well-defined interface to access the data from
pm driver when necessary.

Shawn

> 
> CC      arch/arm/mach-imx/pm-imx7.o
> arch/arm/mach-imx/pm-imx7.c: In function ?imx_gpcv2_pm_init?:
> arch/arm/mach-imx/pm-imx7.c:836:7: error: ?gpcv2_irq_instance? undeclared (first use in this function)
>   cd = gpcv2_irq_instance;
>        ^
> arch/arm/mach-imx/pm-imx7.c:836:7: note: each undeclared identifier is reported only once for each function it appears in
> make[1]: *** [arch/arm/mach-imx/pm-imx7.o] Error 1

[PATCH v6 2/2] ARM: imx: Add suspend codes for imx7D

[Shenwei Wang]

> -----Original Message-----
> From: Shawn Guo [mailto:shawnguo at kernel.org]
> Sent: 2015?7?28? 9:31
> To: Wang Shenwei-B38339
> Cc: jason at lakedaemon.net; Huang Yongcai-B20788;
> linux-kernel at vger.kernel.org; tglx at linutronix.de; shawn.guo at linaro.org;
> linux-arm-kernel at lists.infradead.org
> Subject: Re: [PATCH v6 2/2] ARM: imx: Add suspend codes for imx7D
> 
> On Tue, Jul 28, 2015 at 02:16:20PM +0000, Shenwei Wang wrote:
> > > The files are named with "-imx7".  It's a clear sign that the build
> > > of the files should be controlled by something like related to "imx7".
> > > Ideally, it should be CONFIG_SOC_IMX7.  Since imx7d is the only
> > > supported imx7 soc and there is no CONFIG_SOC_IMX7 available so far,
> > > it falls on CONFIG_SOC_IMX7D.
> >
> > We can also interpret "-imx7" is the first SoC which has the GPCv2 block.
> 
> In that case you should name the block gpc-imx7d rather than gpcv2 and symbol
> as GPC_IMX7D rather than IMX_GPCV2.

I don't want to couple the gpcv2 driver with a SoC. Let's use your suggestion CONFIG_SOC_IMX7D
for now, because it introduce less modifications.
 
> > > > > > +extern struct imx_gpcv2_irq *gpcv2_irq_instance;
> > > > >
> > > > > Will this give a checkpatch warning?
> > > >
> > > > Yes. Any suggestion for that? Move it to a header file?
> > >
> > > Get rid of it.
> >
> > Then you may resolve the following compile error:
> 
> You didn't get my point.  Rather than defining it as a global variable, we should
> try to keep imx_gpcv2_irq as an internal data structure to irqchip driver, and use
> well-defined interface to access the data from pm driver when necessary.

Either to export a variable or a function, you will finally meet the same problem
:where to declare it? Otherwise the same compile error will happen too.

Regards,
Shenwei
 

> Shawn
> 
> >
> > CC      arch/arm/mach-imx/pm-imx7.o
> > arch/arm/mach-imx/pm-imx7.c: In function ?imx_gpcv2_pm_init?:
> > arch/arm/mach-imx/pm-imx7.c:836:7: error: ?gpcv2_irq_instance? undeclared
> (first use in this function)
> >   cd = gpcv2_irq_instance;
> >        ^
> > arch/arm/mach-imx/pm-imx7.c:836:7: note: each undeclared identifier is
> > reported only once for each function it appears in
> > make[1]: *** [arch/arm/mach-imx/pm-imx7.o] Error 1
-------------- next part --------------
A non-text attachment was scrubbed...
Name: ULP1 3rd Party Tools Requirements.xlsx
Type: application/vnd.openxmlformats-officedocument.spreadsheetml.sheet
Size: 19256 bytes
Desc: ULP1 3rd Party Tools Requirements.xlsx
URL: <http://lists.infradead.org/pipermail/linux-arm-kernel/attachments/20150728/02174255/attachment-0001.xlsx>

[PATCH v6 2/2] ARM: imx: Add suspend codes for imx7D

[Zhi Li]

On Tue, Jul 28, 2015 at 9:30 AM, Shawn Guo <shawnguo@kernel.org> wrote:
> On Tue, Jul 28, 2015 at 02:16:20PM +0000, Shenwei Wang wrote:
>> > The files are named with "-imx7".  It's a clear sign that the build of the files
>> > should be controlled by something like related to "imx7".
>> > Ideally, it should be CONFIG_SOC_IMX7.  Since imx7d is the only supported imx7
>> > soc and there is no CONFIG_SOC_IMX7 available so far, it falls on
>> > CONFIG_SOC_IMX7D.
>>
>> We can also interpret "-imx7" is the first SoC which has the GPCv2 block.
>
> In that case you should name the block gpc-imx7d rather than gpcv2 and
> symbol as GPC_IMX7D rather than IMX_GPCV2.

So far, only IMX7D use this GPC.
i.MX8 will use system controller to control power.

best regards
Frank Li

>
>> > > > > +extern struct imx_gpcv2_irq *gpcv2_irq_instance;
>> > > >
>> > > > Will this give a checkpatch warning?
>> > >
>> > > Yes. Any suggestion for that? Move it to a header file?
>> >
>> > Get rid of it.
>>
>> Then you may resolve the following compile error:
>
> You didn't get my point.  Rather than defining it as a global variable,
> we should try to keep imx_gpcv2_irq as an internal data structure to
> irqchip driver, and use well-defined interface to access the data from
> pm driver when necessary.
>
> Shawn
>
>>
>> CC      arch/arm/mach-imx/pm-imx7.o
>> arch/arm/mach-imx/pm-imx7.c: In function ?imx_gpcv2_pm_init?:
>> arch/arm/mach-imx/pm-imx7.c:836:7: error: ?gpcv2_irq_instance? undeclared (first use in this function)
>>   cd = gpcv2_irq_instance;
>>        ^
>> arch/arm/mach-imx/pm-imx7.c:836:7: note: each undeclared identifier is reported only once for each function it appears in
>> make[1]: *** [arch/arm/mach-imx/pm-imx7.o] Error 1
>
> _______________________________________________
> linux-arm-kernel mailing list
> linux-arm-kernel at lists.infradead.org
> http://lists.infradead.org/mailman/listinfo/linux-arm-kernel