From: marc.zyngier@arm.com (Marc Zyngier)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH v5 00/19] Per-device MSI domain & platform MSI
Date: Thu, 23 Jul 2015 10:26:19 +0100 [thread overview]
Message-ID: <1437643598-19795-1-git-send-email-marc.zyngier@arm.com> (raw)
MSI-like interrupts are starting to creep out of the PCI world, and
can now be seen into a number of "platform"-type busses. The
introduction of the MSI domains feature in v3.19 recognised that fact,
and started providing a way to implement this.
Another step in this direction is Jiang Liu's msi_desc series:
https://github.com/jiangliu/linux.git msi_desc_v1
which moves the msi_list from being specific to PCI devices into the
generic device structure.
A problem we have to solve is to identify which MSI domain a device is
"connected" to. Currently, PCI gets away with a mixture of
arch-specific callbacks, and a msi_controller structure that can
optionally carry a pointer to an MSI domain. As we add new bus types
and start dealing with topologies that do not map to what PCI does,
this doesn't scale anymore.
This patch series tries to address some of it by providing a basic
link between 'struct device' and an MSI domain. It also adds :
- a way to "tag" domains according to the "type" of interrupt it
provides (PCI/MSI, platform MSI...), allowing a driver for a piece
of HW identified by its device_node to provide several IRQ domains
- (yet another) way for PCI to propagate the domain pointer through
the PCI device hierarchy, providing a method for OF to kick-start
the propagation process, and finally allowing the PCI/MSI layer to
use that information
- a similar way to hook an MSI domain to a platform device.
- a generic implementation of MSI for platform devices that can be
supported by interrupt controllers.
- support code for platform MSI for both GICv2m and GICv3 ITS.
This makes implementing MSI support in platform devices a relatively
trivial task.
Additionally, a few patches use most of the above to remove any trace
of the msi_controller structure from the three MSI controllers that
are currently in use on arm64, so that they solely rely on the above
infrastructure, leading to some interesting improvements (also known
as "gross hack prevention measures"). We also take this opportunity to
kill the domain pointer from the msi_controller structure.
My hope is to eventually kill msi_controller entirely, and only rely
on the msi_domain contained in the device structure (any help
welcomed, as I already have cleaned up Tegra, and Lorenzo has scrubbed
Designware).
This has been tested on arm64 with GICv2m (AMD Seattle) and GICv3 ITS
(FVP model), and use of platform MSI has been tested with the ARM
SMMUv3.
Patches are on top of 4.2-rc2 and Jiang Liu's series, and available
at:
git://git.kernel.org/pub/scm/linux/kernel/git/maz/arm-platforms.git irq/npci-msi-v3
As always, comments most welcome...
* From v4:
- Nice cleanups in the PCI code after review from Bjorn
- Platform MSI now gets its own namespace in struct msi_desc
- Fixed bisectability issue caught by the 01.org folks
Marc Zyngier (19):
genirq: irqdomain: Allow irq domain aliasing
PCI: MSI: Register irq domain with specific token
device core: Introduce per-device MSI domain pointer
PCI/MSI: Add hooks to populate the msi_domain field
PCI/MSI: of: Add support for OF-provided msi_domain
PCI/MSI: of: Allow msi_domain lookup using the host bridge node
PCI/MSI: Let pci_msi_get_domain use struct device's msi_domain
platform: of: Assign MSI domain to platform device
drivers: base: Add MSI domain support for non-PCI devices
genirq: Add DOMAIN_BUS_NEXUS irqdomain property
irqchip: gicv3-its: Split PCI/MSI code from the core ITS driver
irqchip: gicv3-its: Register irq domain with NEXUS token
irqchip: gicv3-its: Get rid of struct msi_controller
irqchip: gicv3-its: Make the PCI/MSI code standalone
irqchip: gicv3-its: Add platform MSI support
irqchip: GICv2m: Get rid of struct msi_controller
irqchip: GICv2m: Add platform MSI support
PCI/MSI: pci-xgene-msi: Get rid of struct msi_controller
PCI/MSI: Drop domain field from msi_controller
arch/powerpc/platforms/512x/mpc5121_ads_cpld.c | 3 +-
arch/powerpc/platforms/cell/interrupt.c | 3 +-
arch/powerpc/platforms/embedded6xx/flipper-pic.c | 3 +-
arch/powerpc/platforms/powermac/pic.c | 3 +-
arch/powerpc/platforms/powernv/opal-irqchip.c | 3 +-
arch/powerpc/platforms/ps3/interrupt.c | 3 +-
arch/powerpc/sysdev/ehv_pic.c | 3 +-
arch/powerpc/sysdev/i8259.c | 3 +-
arch/powerpc/sysdev/ipic.c | 3 +-
arch/powerpc/sysdev/mpic.c | 3 +-
arch/powerpc/sysdev/qe_lib/qe_ic.c | 3 +-
arch/powerpc/sysdev/xics/xics-common.c | 3 +-
drivers/base/Makefile | 1 +
drivers/base/platform-msi.c | 282 +++++++++++++++++++++++
drivers/irqchip/Makefile | 2 +-
drivers/irqchip/irq-gic-v2m.c | 52 +++--
drivers/irqchip/irq-gic-v3-its-pci-msi.c | 140 +++++++++++
drivers/irqchip/irq-gic-v3-its-platform-msi.c | 93 ++++++++
drivers/irqchip/irq-gic-v3-its.c | 140 ++++-------
drivers/of/irq.c | 21 ++
drivers/of/platform.c | 1 +
drivers/pci/host/pci-xgene-msi.c | 41 ++--
drivers/pci/msi.c | 19 +-
drivers/pci/of.c | 30 +++
drivers/pci/probe.c | 45 ++++
include/linux/device.h | 20 ++
include/linux/irqchip/arm-gic-v3.h | 1 +
include/linux/irqdomain.h | 26 ++-
include/linux/msi.h | 18 +-
include/linux/of_irq.h | 1 +
include/linux/pci.h | 4 +
kernel/irq/irqdomain.c | 18 +-
32 files changed, 815 insertions(+), 176 deletions(-)
create mode 100644 drivers/base/platform-msi.c
create mode 100644 drivers/irqchip/irq-gic-v3-its-pci-msi.c
create mode 100644 drivers/irqchip/irq-gic-v3-its-platform-msi.c
--
2.1.4
next reply other threads:[~2015-07-23 9:26 UTC|newest]
Thread overview: 35+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-07-23 9:26 Marc Zyngier [this message]
2015-07-23 9:26 ` [PATCH v5 01/19] genirq: irqdomain: Allow irq domain aliasing Marc Zyngier
2015-07-25 7:15 ` Hanjun Guo
2015-07-23 9:26 ` [PATCH v5 02/19] PCI: MSI: Register irq domain with specific token Marc Zyngier
2015-07-23 13:05 ` Bjorn Helgaas
2015-07-25 8:02 ` Hanjun Guo
2015-07-23 9:26 ` [PATCH v5 03/19] device core: Introduce per-device MSI domain pointer Marc Zyngier
2015-07-25 8:12 ` Hanjun Guo
2015-07-23 9:26 ` [PATCH v5 04/19] PCI/MSI: Add hooks to populate the msi_domain field Marc Zyngier
2015-07-23 13:06 ` Bjorn Helgaas
2015-07-23 14:52 ` Marc Zyngier
2015-07-23 15:36 ` Bjorn Helgaas
2015-07-25 8:20 ` Hanjun Guo
2015-07-23 9:26 ` [PATCH v5 05/19] PCI/MSI: of: Add support for OF-provided msi_domain Marc Zyngier
2015-07-23 13:12 ` Bjorn Helgaas
2015-07-23 9:26 ` [PATCH v5 06/19] PCI/MSI: of: Allow msi_domain lookup using the host bridge node Marc Zyngier
2015-07-23 13:13 ` Bjorn Helgaas
2015-07-23 9:26 ` [PATCH v5 07/19] PCI/MSI: Let pci_msi_get_domain use struct device's msi_domain Marc Zyngier
2015-07-23 13:14 ` Bjorn Helgaas
2015-07-25 8:25 ` Hanjun Guo
2015-07-23 9:26 ` [PATCH v5 08/19] platform: of: Assign MSI domain to platform device Marc Zyngier
2015-07-23 9:26 ` [PATCH v5 09/19] drivers: base: Add MSI domain support for non-PCI devices Marc Zyngier
2015-07-23 9:26 ` [PATCH v5 10/19] genirq: Add DOMAIN_BUS_NEXUS irqdomain property Marc Zyngier
2015-07-23 9:26 ` [PATCH v5 11/19] irqchip: gicv3-its: Split PCI/MSI code from the core ITS driver Marc Zyngier
2015-07-23 9:26 ` [PATCH v5 12/19] irqchip: gicv3-its: Register irq domain with NEXUS token Marc Zyngier
2015-07-23 9:26 ` [PATCH v5 13/19] irqchip: gicv3-its: Get rid of struct msi_controller Marc Zyngier
2015-07-23 9:26 ` [PATCH v5 14/19] irqchip: gicv3-its: Make the PCI/MSI code standalone Marc Zyngier
2015-07-23 9:26 ` [PATCH v5 15/19] irqchip: gicv3-its: Add platform MSI support Marc Zyngier
2015-07-23 9:26 ` [PATCH v5 16/19] irqchip: GICv2m: Get rid of struct msi_controller Marc Zyngier
2015-07-23 9:26 ` [PATCH v5 17/19] irqchip: GICv2m: Add platform MSI support Marc Zyngier
2015-07-23 9:26 ` [PATCH v5 18/19] PCI/MSI: pci-xgene-msi: Get rid of struct msi_controller Marc Zyngier
2015-07-23 13:17 ` Bjorn Helgaas
2015-07-23 9:26 ` [PATCH v5 19/19] PCI/MSI: Drop domain field from msi_controller Marc Zyngier
2015-07-23 13:18 ` [PATCH v5 00/19] Per-device MSI domain & platform MSI Bjorn Helgaas
2015-07-23 14:54 ` Marc Zyngier
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1437643598-19795-1-git-send-email-marc.zyngier@arm.com \
--to=marc.zyngier@arm.com \
--cc=linux-arm-kernel@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).