From: HenryC.Chen@mediatek.com (Henry Chen)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH v3 1/2] dt-bindings: regulator: mt6311: Add document for mt6311 regulator
Date: Fri, 24 Jul 2015 11:35:51 +0800 [thread overview]
Message-ID: <1437708951.30329.92.camel@mtksdaap41> (raw)
In-Reply-To: <CABxcv==6R46AqkTBHPfHdWc8gJZigQdREieZMVkLY9AEvevtUw@mail.gmail.com>
Hi Javier,
On Thu, 2015-07-23 at 10:43 +0200, Javier Martinez Canillas wrote:
> Hello Henry,
>
> On Thu, Jul 23, 2015 at 5:39 AM, Henry Chen <henryc.chen@mediatek.com> wrote:
> > This patch adds a list of supported regulator names to the devicetree
> > binding documentation for Mediatek MT6311 PMIC.
> >
> > Signed-off-by: Henry Chen <henryc.chen@mediatek.com>
> > ---
> > .../bindings/regulator/mt6311-regulator.txt | 35 ++++++++++++++++++++++
> > 1 file changed, 35 insertions(+)
> > create mode 100644 Documentation/devicetree/bindings/regulator/mt6311-regulator.txt
> >
> > diff --git a/Documentation/devicetree/bindings/regulator/mt6311-regulator.txt b/Documentation/devicetree/bindings/regulator/mt6311-regulator.txt
> > new file mode 100644
> > index 0000000..9387d6d
> > --- /dev/null
> > +++ b/Documentation/devicetree/bindings/regulator/mt6311-regulator.txt
> > @@ -0,0 +1,35 @@
> > +Mediatek MT6311 Regulator Driver
> > +
> > +Required properties:
> > +- compatible: "mediatek,mt6311-regulator"
> > +- reg: I2C slave address, usually 0x6b.
> > +- regulators: List of regulators provided by this controller. It is named
> > + to VDVFS and VBIASN.
> > + The definition for each of these nodes is defined using the standard binding
> > + for regulators at Documentation/devicetree/bindings/regulator/regulator.txt.
> > +
> > +The valid names for regulators are:
> > +BUCK:
> > + VDVFS
> > +LDO:
> > + VBIASN
> > +
> > +Example:
>
> Sorry, I missed this in the previous revision but the ePAPR document
> says "the name of a node should be somewhat generic, reflecting the
> function of the device and not its precise programming model."
>
> > + pmic: mt6311 at 6B {
>
> So this should be:
>
> mt6311: pmic@
Ok, I will change it, thanks for reviewing.
Henry
>
> > + compatible = "mediatek,mt6311-regulator";
> > + reg = <0x6B>;
> > +
> > + regulators {
> > + mt6311_vcpu_reg: VDVFS {
> > + regulator-name = "VDVFS";
> > + regulator-min-microvolt = < 600000>;
> > + regulator-max-microvolt = <1400000>;
> > + regulator-ramp-delay = <10000>;
> > + };
> > + mt6311_ldo_reg: VBIASN {
> > + regulator-name = "VBIASN";
> > + regulator-min-microvolt = <200000>;
> > + regulator-max-microvolt = <800000>;
> > + };
> > + };
> > + };
> > --
>
> Besides the comment above, it looks good to me.
>
> Reviewed-by: Javier Martinez Canillas <javier@osg.samsung.com>
>
> Best regards,
> Javier
next prev parent reply other threads:[~2015-07-24 3:35 UTC|newest]
Thread overview: 9+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-07-23 3:39 [PATCH v3] regulator: mt6311: Add support for MT6311 regulator Henry Chen
2015-07-23 3:39 ` [PATCH v3 1/2] dt-bindings: regulator: mt6311: Add document for mt6311 regulator Henry Chen
2015-07-23 8:43 ` Javier Martinez Canillas
2015-07-24 3:35 ` Henry Chen [this message]
2015-07-23 3:39 ` [PATCH v3 2/2] regulator: mt6311: Add support " Henry Chen
2015-07-23 9:07 ` Javier Martinez Canillas
2015-07-23 11:04 ` Henry Chen
2015-07-23 13:25 ` Daniel Kurtz
2015-07-23 14:25 ` Javier Martinez Canillas
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1437708951.30329.92.camel@mtksdaap41 \
--to=henryc.chen@mediatek.com \
--cc=linux-arm-kernel@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox