linux-arm-kernel.lists.infradead.org archive mirror
 help / color / mirror / Atom feed
From: ard.biesheuvel@linaro.org (Ard Biesheuvel)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH v2] arm64/efi: prefer AllocatePages() over efi_low_alloc() for vmlinux
Date: Fri, 24 Jul 2015 13:38:27 +0200	[thread overview]
Message-ID: <1437737907-10477-1-git-send-email-ard.biesheuvel@linaro.org> (raw)

When allocating memory for the kernel image, try the AllocatePages()
boot service to obtain memory at the preferred offset of
'dram_base + TEXT_OFFSET', and only revert to efi_low_alloc() if that
fails. This is the only way to allocate at the base of DRAM if DRAM
starts at 0x0, since efi_low_alloc() refuses to allocate at 0x0.

Tested-by: Haojian Zhuang <haojian.zhuang@linaro.org>
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
---
v2:
- reshuffle code flow to make it more logical, and have only a single
  memcpy() invocation at the end of the function
---
 arch/arm64/kernel/efi-stub.c | 41 ++++++++++++++++++++++++++++++++---------
 1 file changed, 32 insertions(+), 9 deletions(-)

diff --git a/arch/arm64/kernel/efi-stub.c b/arch/arm64/kernel/efi-stub.c
index f5374065ad53..816120ece6bc 100644
--- a/arch/arm64/kernel/efi-stub.c
+++ b/arch/arm64/kernel/efi-stub.c
@@ -13,7 +13,7 @@
 #include <asm/efi.h>
 #include <asm/sections.h>
 
-efi_status_t __init handle_kernel_image(efi_system_table_t *sys_table,
+efi_status_t __init handle_kernel_image(efi_system_table_t *sys_table_arg,
 					unsigned long *image_addr,
 					unsigned long *image_size,
 					unsigned long *reserve_addr,
@@ -23,21 +23,44 @@ efi_status_t __init handle_kernel_image(efi_system_table_t *sys_table,
 {
 	efi_status_t status;
 	unsigned long kernel_size, kernel_memsize = 0;
+	unsigned long nr_pages;
+	void *old_image_addr = (void *)*image_addr;
 
 	/* Relocate the image, if required. */
 	kernel_size = _edata - _text;
 	if (*image_addr != (dram_base + TEXT_OFFSET)) {
 		kernel_memsize = kernel_size + (_end - _edata);
-		status = efi_low_alloc(sys_table, kernel_memsize + TEXT_OFFSET,
-				       SZ_2M, reserve_addr);
+
+		/*
+		 * First, try a straight allocation at the preferred offset.
+		 * This will work around the issue where, if dram_base == 0x0,
+		 * efi_low_alloc() refuses to allocate at 0x0 (to prevent the
+		 * address of the allocation to be mistaken for a FAIL return
+		 * value or a NULL pointer). It will also ensure that, on
+		 * platforms where the [dram_base, dram_base + TEXT_OFFSET)
+		 * interval is partially occupied by the firmware (like on APM
+		 * Mustang), we can still place the kernel at the address
+		 * 'dram_base + TEXT_OFFSET'.
+		 */
+		*image_addr = *reserve_addr = dram_base + TEXT_OFFSET;
+		nr_pages = round_up(kernel_memsize, EFI_ALLOC_ALIGN) /
+			   EFI_PAGE_SIZE;
+		status = efi_call_early(allocate_pages, EFI_ALLOCATE_ADDRESS,
+					EFI_LOADER_DATA, nr_pages,
+					(efi_physical_addr_t *)reserve_addr);
 		if (status != EFI_SUCCESS) {
-			pr_efi_err(sys_table, "Failed to relocate kernel\n");
-			return status;
+			kernel_memsize += TEXT_OFFSET;
+			status = efi_low_alloc(sys_table_arg, kernel_memsize,
+					       SZ_2M, reserve_addr);
+
+			if (status != EFI_SUCCESS) {
+				pr_efi_err(sys_table_arg, "Failed to relocate kernel\n");
+				return status;
+			}
+			*image_addr = *reserve_addr + TEXT_OFFSET;
 		}
-		memcpy((void *)*reserve_addr + TEXT_OFFSET, (void *)*image_addr,
-		       kernel_size);
-		*image_addr = *reserve_addr + TEXT_OFFSET;
-		*reserve_size = kernel_memsize + TEXT_OFFSET;
+		memcpy((void *)*image_addr, old_image_addr, kernel_size);
+		*reserve_size = kernel_memsize;
 	}
 
 
-- 
1.9.1

             reply	other threads:[~2015-07-24 11:38 UTC|newest]

Thread overview: 7+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2015-07-24 11:38 Ard Biesheuvel [this message]
2015-07-24 13:04 ` [PATCH v2] arm64/efi: prefer AllocatePages() over efi_low_alloc() for vmlinux Mark Rutland
2015-07-28 21:17 ` Matt Fleming
2015-07-28 21:24   ` Ard Biesheuvel
2015-07-28 22:06     ` Matt Fleming
2015-07-29 10:27     ` Will Deacon
2015-10-27 21:15 ` Timur Tabi

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1437737907-10477-1-git-send-email-ard.biesheuvel@linaro.org \
    --to=ard.biesheuvel@linaro.org \
    --cc=linux-arm-kernel@lists.infradead.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).