From: marc.zyngier@arm.com (Marc Zyngier)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH v3 10/11] KVM: arm/arm64: timer: Allow the timer to control the active state
Date: Fri, 24 Jul 2015 16:55:08 +0100 [thread overview]
Message-ID: <1437753309-17989-11-git-send-email-marc.zyngier@arm.com> (raw)
In-Reply-To: <1437753309-17989-1-git-send-email-marc.zyngier@arm.com>
In order to remove the crude hack where we sneak the masked bit
into the timer's control register, make use of the phys_irq_map
API control the active state of the interrupt.
This causes some limited changes to allow for potential error
propagation.
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
---
arch/arm/kvm/reset.c | 4 +---
arch/arm64/kvm/reset.c | 4 +---
include/kvm/arm_arch_timer.h | 7 +++++--
virt/kvm/arm/arch_timer.c | 29 ++++++++++++++++++++++-------
4 files changed, 29 insertions(+), 15 deletions(-)
diff --git a/arch/arm/kvm/reset.c b/arch/arm/kvm/reset.c
index f558c07..eeb85858 100644
--- a/arch/arm/kvm/reset.c
+++ b/arch/arm/kvm/reset.c
@@ -77,7 +77,5 @@ int kvm_reset_vcpu(struct kvm_vcpu *vcpu)
kvm_reset_coprocs(vcpu);
/* Reset arch_timer context */
- kvm_timer_vcpu_reset(vcpu, cpu_vtimer_irq);
-
- return 0;
+ return kvm_timer_vcpu_reset(vcpu, cpu_vtimer_irq);
}
diff --git a/arch/arm64/kvm/reset.c b/arch/arm64/kvm/reset.c
index b4af618..91cf535 100644
--- a/arch/arm64/kvm/reset.c
+++ b/arch/arm64/kvm/reset.c
@@ -121,7 +121,5 @@ int kvm_reset_vcpu(struct kvm_vcpu *vcpu)
kvm_reset_sys_regs(vcpu);
/* Reset timer */
- kvm_timer_vcpu_reset(vcpu, cpu_vtimer_irq);
-
- return 0;
+ return kvm_timer_vcpu_reset(vcpu, cpu_vtimer_irq);
}
diff --git a/include/kvm/arm_arch_timer.h b/include/kvm/arm_arch_timer.h
index e596675..e1e4d7c 100644
--- a/include/kvm/arm_arch_timer.h
+++ b/include/kvm/arm_arch_timer.h
@@ -52,13 +52,16 @@ struct arch_timer_cpu {
/* Timer IRQ */
const struct kvm_irq_level *irq;
+
+ /* VGIC mapping */
+ struct irq_phys_map *map;
};
int kvm_timer_hyp_init(void);
void kvm_timer_enable(struct kvm *kvm);
void kvm_timer_init(struct kvm *kvm);
-void kvm_timer_vcpu_reset(struct kvm_vcpu *vcpu,
- const struct kvm_irq_level *irq);
+int kvm_timer_vcpu_reset(struct kvm_vcpu *vcpu,
+ const struct kvm_irq_level *irq);
void kvm_timer_vcpu_init(struct kvm_vcpu *vcpu);
void kvm_timer_flush_hwstate(struct kvm_vcpu *vcpu);
void kvm_timer_sync_hwstate(struct kvm_vcpu *vcpu);
diff --git a/virt/kvm/arm/arch_timer.c b/virt/kvm/arm/arch_timer.c
index 98c95f2..76e38d2 100644
--- a/virt/kvm/arm/arch_timer.c
+++ b/virt/kvm/arm/arch_timer.c
@@ -64,10 +64,10 @@ static void kvm_timer_inject_irq(struct kvm_vcpu *vcpu)
int ret;
struct arch_timer_cpu *timer = &vcpu->arch.timer_cpu;
- timer->cntv_ctl |= ARCH_TIMER_CTRL_IT_MASK;
- ret = kvm_vgic_inject_irq(vcpu->kvm, vcpu->vcpu_id,
- timer->irq->irq,
- timer->irq->level);
+ kvm_vgic_set_phys_irq_active(timer->map, true);
+ ret = kvm_vgic_inject_mapped_irq(vcpu->kvm, vcpu->vcpu_id,
+ timer->map,
+ timer->irq->level);
WARN_ON(ret);
}
@@ -117,7 +117,8 @@ bool kvm_timer_should_fire(struct kvm_vcpu *vcpu)
cycle_t cval, now;
if ((timer->cntv_ctl & ARCH_TIMER_CTRL_IT_MASK) ||
- !(timer->cntv_ctl & ARCH_TIMER_CTRL_ENABLE))
+ !(timer->cntv_ctl & ARCH_TIMER_CTRL_ENABLE) ||
+ kvm_vgic_get_phys_irq_active(timer->map))
return false;
cval = timer->cntv_cval;
@@ -184,10 +185,11 @@ void kvm_timer_sync_hwstate(struct kvm_vcpu *vcpu)
timer_arm(timer, ns);
}
-void kvm_timer_vcpu_reset(struct kvm_vcpu *vcpu,
- const struct kvm_irq_level *irq)
+int kvm_timer_vcpu_reset(struct kvm_vcpu *vcpu,
+ const struct kvm_irq_level *irq)
{
struct arch_timer_cpu *timer = &vcpu->arch.timer_cpu;
+ struct irq_phys_map *map;
/*
* The vcpu timer irq number cannot be determined in
@@ -196,6 +198,17 @@ void kvm_timer_vcpu_reset(struct kvm_vcpu *vcpu,
* vcpu timer irq number when the vcpu is reset.
*/
timer->irq = irq;
+
+ /*
+ * Tell the VGIC that the virtual interrupt is tied to a
+ * physical interrupt. We do that once per VCPU.
+ */
+ map = kvm_vgic_map_phys_irq(vcpu, irq->irq, host_vtimer_irq);
+ if (WARN_ON(IS_ERR(map)))
+ return PTR_ERR(map);
+
+ timer->map = map;
+ return 0;
}
void kvm_timer_vcpu_init(struct kvm_vcpu *vcpu)
@@ -335,6 +348,8 @@ void kvm_timer_vcpu_terminate(struct kvm_vcpu *vcpu)
struct arch_timer_cpu *timer = &vcpu->arch.timer_cpu;
timer_disarm(timer);
+ if (timer->map)
+ kvm_vgic_unmap_phys_irq(vcpu, timer->map);
}
void kvm_timer_enable(struct kvm *kvm)
--
2.1.4
next prev parent reply other threads:[~2015-07-24 15:55 UTC|newest]
Thread overview: 37+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-07-24 15:54 [PATCH v3 00/11] arm/arm64: KVM: Active interrupt state switching for shared devices Marc Zyngier
2015-07-24 15:54 ` [PATCH v3 01/11] arm/arm64: KVM: Fix ordering of timer/GIC on guest entry Marc Zyngier
2015-07-24 15:55 ` [PATCH v3 02/11] arm/arm64: KVM: Move vgic handling to a non-preemptible section Marc Zyngier
2015-07-24 15:55 ` [PATCH v3 03/11] KVM: arm/arm64: vgic: Convert struct vgic_lr to use bitfields Marc Zyngier
2015-07-24 15:55 ` [PATCH v3 04/11] KVM: arm/arm64: vgic: Allow HW irq to be encoded in LR Marc Zyngier
2015-08-04 14:33 ` Christoffer Dall
2015-07-24 15:55 ` [PATCH v3 05/11] KVM: arm/arm64: vgic: Relax vgic_can_sample_irq for edge IRQs Marc Zyngier
2015-07-24 15:55 ` [PATCH v3 06/11] KVM: arm/arm64: vgic: Allow dynamic mapping of physical/virtual interrupts Marc Zyngier
2015-08-04 13:04 ` Christoffer Dall
2015-08-04 15:27 ` Marc Zyngier
2015-08-04 17:36 ` Christoffer Dall
2015-08-04 18:10 ` Marc Zyngier
2015-07-24 15:55 ` [PATCH v3 07/11] KVM: arm/arm64: vgic: Allow HW interrupts to be queued to a guest Marc Zyngier
2015-08-04 14:33 ` Christoffer Dall
2015-07-24 15:55 ` [PATCH v3 08/11] KVM: arm/arm64: vgic: Add vgic_{get, set}_phys_irq_active Marc Zyngier
2015-07-24 15:55 ` [PATCH v3 09/11] KVM: arm/arm64: vgic: Prevent userspace injection of a mapped interrupt Marc Zyngier
2015-08-04 13:45 ` Christoffer Dall
2015-08-04 16:02 ` Marc Zyngier
2015-08-04 17:38 ` Christoffer Dall
2015-08-04 16:21 ` Eric Auger
2015-08-04 16:44 ` Marc Zyngier
2015-08-05 7:32 ` Eric Auger
2015-08-05 9:44 ` Marc Zyngier
2015-08-05 10:53 ` Christoffer Dall
2015-08-05 11:47 ` Eric Auger
2015-08-05 13:47 ` Christoffer Dall
2015-08-06 16:44 ` Marc Zyngier
2015-08-07 7:05 ` Eric Auger
2015-08-07 8:29 ` Marc Zyngier
2015-07-24 15:55 ` Marc Zyngier [this message]
2015-08-04 13:56 ` [PATCH v3 10/11] KVM: arm/arm64: timer: Allow the timer to control the active state Christoffer Dall
2015-08-04 16:14 ` Marc Zyngier
2015-08-04 17:40 ` Christoffer Dall
2015-07-24 15:55 ` [PATCH v3 11/11] KVM: arm/arm64: vgic: Allow HW interrupts for non-shared devices Marc Zyngier
2015-08-04 14:32 ` Christoffer Dall
2015-08-04 17:08 ` Marc Zyngier
2015-08-04 18:07 ` Christoffer Dall
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1437753309-17989-11-git-send-email-marc.zyngier@arm.com \
--to=marc.zyngier@arm.com \
--cc=linux-arm-kernel@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).