From: yong.wu@mediatek.com (Yong Wu)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH v3 6/6] dts: mt8173: Add iommu/smi nodes for mt8173
Date: Wed, 29 Jul 2015 15:29:16 +0800 [thread overview]
Message-ID: <1438154956.25925.132.camel@mhfsdcap03> (raw)
In-Reply-To: <CAGS+omB5xS8LoQR9-S8iqhdsRb4OWQ_B656dJSincLZ9nby1ZA@mail.gmail.com>
On Thu, 2015-07-23 at 22:40 +0800, Daniel Kurtz wrote:
> Hi Yong,
>
> On Thu, Jul 16, 2015 at 5:04 PM, Yong Wu <yong.wu@mediatek.com> wrote:
> >
> > This patch add the iommu/larbs nodes for mt8173
>
> To what tree does this apply?
> Please rebase these patches (especially this one) on an Matthias'
> current v4.2-next/for-next.
Hi Daniel,
Sorry for reply so late. I will rebase these patch next time.
And the m4u/smi dsti is based on clocks, So I have to add the
patches of the latest MTK clocks[1] locally, then prepare this iommu
dtsi patch.
[1]:http://lists.infradead.org/pipermail/linux-mediatek/2015-July/001800.html
>
>
> >
> > Signed-off-by: Yong Wu <yong.wu@mediatek.com>
> > ---
> > arch/arm64/boot/dts/mediatek/mt8173.dtsi | 81 ++++++++++++++++++++++++++++++
> > 1 file changed, 81 insertions(+)
> >
> > diff --git a/arch/arm64/boot/dts/mediatek/mt8173.dtsi b/arch/arm64/boot/dts/mediatek/mt8173.dtsi
> > index e81ac1f..7b8e73c 100644
> > --- a/arch/arm64/boot/dts/mediatek/mt8173.dtsi
> > +++ b/arch/arm64/boot/dts/mediatek/mt8173.dtsi
> > @@ -14,6 +14,7 @@
> > #include <dt-bindings/clock/mt8173-clk.h>
> > #include <dt-bindings/interrupt-controller/irq.h>
> > #include <dt-bindings/interrupt-controller/arm-gic.h>
> > +#include <dt-bindings/memory/mt8173-larb-port.h>
> > #include <dt-bindings/power/mt8173-power.h>
> > #include <dt-bindings/reset-controller/mt8173-resets.h>
> > #include "mt8173-pinfunc.h"
> > @@ -240,6 +241,17 @@
> > reg = <0 0x10200620 0 0x20>;
> > };
> >
> > + iommu: mmsys_iommu at 10205000 {
>
> This name should be generic, like this (this comment really applies to
> the binding patch):
>
> iommu: iommu at 10205000
Thanks.
>
> > + compatible = "mediatek,mt8173-m4u";
> > + reg = <0 0x10205000 0 0x1000>;
> > + interrupts = <GIC_SPI 139 IRQ_TYPE_LEVEL_LOW>;
> > + clocks = <&infracfg CLK_INFRA_M4U>;
> > + clock-names = "bclk";
> > + mediatek,larb = <&larb0 &larb1 &larb2
> > + &larb3 &larb4 &larb5>;
>
> Tiny nit... please align the "&".
>
> Otherwise, this one is:
>
> Reviewed-by: Daniel Kurtz <djkurtz@chromium.org>
Thanks very much. I will improve them next version.
Look forward to that line:)
>
> Thanks!
> -Dan
>
> > + #iommu-cells = <2>;
> > + };
> > +
> > apmixedsys: clock-controller at 10209000 {
> > compatible = "mediatek,mt8173-apmixedsys";
> > reg = <0 0x10209000 0 0x1000>;
> > @@ -401,29 +413,98 @@
> > #clock-cells = <1>;
> > };
> >
> > + larb0: larb at 14021000 {
> > + compatible = "mediatek,mt8173-smi-larb";
> > + reg = <0 0x14021000 0 0x1000>;
> > + mediatek,smi = <&smi_common>;
> > + power-domains = <&scpsys MT8173_POWER_DOMAIN_MM>;
> > + clocks = <&mmsys CLK_MM_SMI_LARB0>,
> > + <&mmsys CLK_MM_SMI_LARB0>;
> > + clock-names = "apb", "smi";
> > + };
> > +
> > + smi_common: smi at 14022000 {
> > + compatible = "mediatek,mt8173-smi";
> > + reg = <0 0x14022000 0 0x1000>;
> > + power-domains = <&scpsys MT8173_POWER_DOMAIN_MM>;
> > + clocks = <&mmsys CLK_MM_SMI_COMMON>,
> > + <&mmsys CLK_MM_SMI_COMMON>;
> > + clock-names = "apb", "smi";
> > + };
> > +
> > + larb4: larb at 14027000 {
> > + compatible = "mediatek,mt8173-smi-larb";
> > + reg = <0 0x14027000 0 0x1000>;
> > + mediatek,smi = <&smi_common>;
> > + power-domains = <&scpsys MT8173_POWER_DOMAIN_MM>;
> > + clocks = <&mmsys CLK_MM_SMI_LARB4>,
> > + <&mmsys CLK_MM_SMI_LARB4>;
> > + clock-names = "apb", "smi";
> > + };
> > +
> > imgsys: imgsys at 15000000 {
> > compatible = "mediatek,mt8173-imgsys", "syscon";
> > reg = <0 0x15000000 0 0x1000>;
> > #clock-cells = <1>;
> > };
> >
> > + larb2: larb at 15001000 {
> > + compatible = "mediatek,mt8173-smi-larb";
> > + reg = <0 0x15001000 0 0x1000>;
> > + mediatek,smi = <&smi_common>;
> > + power-domains = <&scpsys MT8173_POWER_DOMAIN_ISP>;
> > + clocks = <&imgsys CLK_IMG_LARB2_SMI>,
> > + <&imgsys CLK_IMG_LARB2_SMI>;
> > + clock-names = "apb", "smi";
> > + };
> > +
> > vdecsys: vdecsys at 16000000 {
> > compatible = "mediatek,mt8173-vdecsys", "syscon";
> > reg = <0 0x16000000 0 0x1000>;
> > #clock-cells = <1>;
> > };
> >
> > + larb1: larb at 16010000 {
> > + compatible = "mediatek,mt8173-smi-larb";
> > + reg = <0 0x16010000 0 0x1000>;
> > + mediatek,smi = <&smi_common>;
> > + power-domains = <&scpsys MT8173_POWER_DOMAIN_VDEC>;
> > + clocks = <&vdecsys CLK_VDEC_CKEN>,
> > + <&vdecsys CLK_VDEC_LARB_CKEN>;
> > + clock-names = "apb", "smi";
> > + };
> > +
> > vencsys: vencsys at 18000000 {
> > compatible = "mediatek,mt8173-vencsys", "syscon";
> > reg = <0 0x18000000 0 0x1000>;
> > #clock-cells = <1>;
> > };
> >
> > + larb3: larb at 18001000 {
> > + compatible = "mediatek,mt8173-smi-larb";
> > + reg = <0 0x18001000 0 0x1000>;
> > + mediatek,smi = <&smi_common>;
> > + power-domains = <&scpsys MT8173_POWER_DOMAIN_VENC>;
> > + clocks = <&vencsys CLK_VENC_CKE1>,
> > + <&vencsys CLK_VENC_CKE0>;
> > + clock-names = "apb", "smi";
> > + };
> > +
> > vencltsys: vencltsys at 19000000 {
> > compatible = "mediatek,mt8173-vencltsys", "syscon";
> > reg = <0 0x19000000 0 0x1000>;
> > #clock-cells = <1>;
> > };
> > +
> > + larb5: larb at 19001000 {
> > + compatible = "mediatek,mt8173-smi-larb";
> > + reg = <0 0x19001000 0 0x1000>;
> > + mediatek,smi = <&smi_common>;
> > + power-domains = <&scpsys MT8173_POWER_DOMAIN_VENC_LT>;
> > + clocks = <&vencltsys CLK_VENCLT_CKE1>,
> > + <&vencltsys CLK_VENCLT_CKE0>;
> > + clock-names = "apb", "smi";
> > + };
> > };
> > };
> >
> > --
> > 1.7.9.5
> >
>
>
>
prev parent reply other threads:[~2015-07-29 7:29 UTC|newest]
Thread overview: 34+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-07-16 9:04 [PATCH v3 0/6] MT8173 IOMMU SUPPORT Yong Wu
2015-07-16 9:04 ` [PATCH v3 1/6] dt-bindings: iommu: Add binding for mediatek IOMMU Yong Wu
2015-07-16 9:04 ` [PATCH v3 2/6] dt-bindings: mediatek: Add smi dts binding Yong Wu
2015-07-16 9:04 ` [PATCH v3 3/6] iommu: add ARM short descriptor page table allocator Yong Wu
2015-07-21 17:11 ` Will Deacon
2015-07-24 5:24 ` Yong Wu
2015-07-24 16:53 ` Will Deacon
2015-07-27 4:21 ` Yong Wu
2015-07-27 14:05 ` Robin Murphy
2015-07-27 14:11 ` Will Deacon
2015-07-28 5:08 ` Yong Wu
2015-07-28 11:00 ` Will Deacon
2015-07-28 13:37 ` Yong Wu
2015-07-28 13:47 ` Will Deacon
[not found] ` <1438329337.25925.147.camel@mhfsdcap03>
2015-07-31 11:32 ` Will Deacon
2015-09-14 12:25 ` Yong Wu
2015-09-16 12:55 ` Will Deacon
2015-09-17 2:38 ` Yong Wu
2015-07-16 9:04 ` [PATCH v3 4/6] memory: mediatek: Add SMI driver Yong Wu
2015-07-16 9:04 ` [PATCH v3 5/6] iommu/mediatek: Add mt8173 IOMMU driver Yong Wu
2015-07-21 14:59 ` Will Deacon
2015-07-24 5:43 ` Yong Wu
2015-07-24 16:55 ` Will Deacon
2015-07-27 4:24 ` Yong Wu
2015-07-27 15:48 ` Will Deacon
2015-07-27 13:23 ` Robin Murphy
2015-07-27 15:31 ` Russell King - ARM Linux
2015-07-27 15:49 ` Robin Murphy
2015-07-29 5:41 ` Yong Wu
2015-07-29 10:31 ` Will Deacon
2015-07-29 6:32 ` Yong Wu
2015-07-16 9:04 ` [PATCH v3 6/6] dts: mt8173: Add iommu/smi nodes for mt8173 Yong Wu
2015-07-23 14:40 ` Daniel Kurtz
2015-07-29 7:29 ` Yong Wu [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1438154956.25925.132.camel@mhfsdcap03 \
--to=yong.wu@mediatek.com \
--cc=linux-arm-kernel@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).