From mboxrd@z Thu Jan 1 00:00:00 1970 From: alexandre.belloni@free-electrons.com (Alexandre Belloni) Date: Fri, 31 Jul 2015 11:39:45 +0200 Subject: [PATCH 09/23] ARM: at91/dt: at91sam9g45: use slow clock where necessary In-Reply-To: <1438335599-3301-1-git-send-email-alexandre.belloni@free-electrons.com> References: <1438335599-3301-1-git-send-email-alexandre.belloni@free-electrons.com> Message-ID: <1438335599-3301-10-git-send-email-alexandre.belloni@free-electrons.com> To: linux-arm-kernel@lists.infradead.org List-Id: linux-arm-kernel.lists.infradead.org The watchdog, the reset controller, the RTC, the real-time timer, the shutdown controller and the timer counters need the slow clock, add it where necessary. Signed-off-by: Alexandre Belloni --- arch/arm/boot/dts/at91sam9g45.dtsi | 12 ++++++++---- 1 file changed, 8 insertions(+), 4 deletions(-) diff --git a/arch/arm/boot/dts/at91sam9g45.dtsi b/arch/arm/boot/dts/at91sam9g45.dtsi index 18177f5a7464..b8b878c25227 100644 --- a/arch/arm/boot/dts/at91sam9g45.dtsi +++ b/arch/arm/boot/dts/at91sam9g45.dtsi @@ -387,6 +387,7 @@ rstc at fffffd00 { compatible = "atmel,at91sam9g45-rstc"; reg = <0xfffffd00 0x10>; + clocks = <&clk32k>; }; pit: timer at fffffd30 { @@ -400,22 +401,23 @@ shdwc at fffffd10 { compatible = "atmel,at91sam9rl-shdwc"; reg = <0xfffffd10 0x10>; + clocks = <&clk32k>; }; tcb0: timer at fff7c000 { compatible = "atmel,at91rm9200-tcb"; reg = <0xfff7c000 0x100>; interrupts = <18 IRQ_TYPE_LEVEL_HIGH 0>; - clocks = <&tcb0_clk>, <&tcb0_clk>, <&tcb0_clk>; - clock-names = "t0_clk", "t1_clk", "t2_clk"; + clocks = <&tcb0_clk>, <&tcb0_clk>, <&tcb0_clk>, <&clk32k>; + clock-names = "t0_clk", "t1_clk", "t2_clk", "slow_clk"; }; tcb1: timer at fffd4000 { compatible = "atmel,at91rm9200-tcb"; reg = <0xfffd4000 0x100>; interrupts = <18 IRQ_TYPE_LEVEL_HIGH 0>; - clocks = <&tcb0_clk>, <&tcb0_clk>, <&tcb0_clk>; - clock-names = "t0_clk", "t1_clk", "t2_clk"; + clocks = <&tcb0_clk>, <&tcb0_clk>, <&tcb0_clk>, <&clk32k>; + clock-names = "t0_clk", "t1_clk", "t2_clk", "slow_clk"; }; dma: dma-controller at ffffec00 { @@ -1113,6 +1115,7 @@ compatible = "atmel,at91sam9260-wdt"; reg = <0xfffffd40 0x10>; interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>; + clocks = <&clk32k>; atmel,watchdog-type = "hardware"; atmel,reset-type = "all"; atmel,dbg-halt; @@ -1247,6 +1250,7 @@ compatible = "atmel,at91rm9200-rtc"; reg = <0xfffffdb0 0x30>; interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>; + clocks = <&clk32k>; status = "disabled"; }; -- 2.1.4