From mboxrd@z Thu Jan 1 00:00:00 1970 From: alexandre.belloni@free-electrons.com (Alexandre Belloni) Date: Fri, 31 Jul 2015 11:39:46 +0200 Subject: [PATCH 10/23] ARM: at91/dt: at91sam9n12: use slow clock where necessary In-Reply-To: <1438335599-3301-1-git-send-email-alexandre.belloni@free-electrons.com> References: <1438335599-3301-1-git-send-email-alexandre.belloni@free-electrons.com> Message-ID: <1438335599-3301-11-git-send-email-alexandre.belloni@free-electrons.com> To: linux-arm-kernel@lists.infradead.org List-Id: linux-arm-kernel.lists.infradead.org The watchdog, the reset controller, the RTC, the shutdown controller, the timer counters and the LCD PWM need the slow clock, add it where necessary. The LCD PWM will be handled later. Signed-off-by: Alexandre Belloni --- arch/arm/boot/dts/at91sam9n12.dtsi | 12 ++++++++---- 1 file changed, 8 insertions(+), 4 deletions(-) diff --git a/arch/arm/boot/dts/at91sam9n12.dtsi b/arch/arm/boot/dts/at91sam9n12.dtsi index 5c2a8c8c8bd4..345186f91422 100644 --- a/arch/arm/boot/dts/at91sam9n12.dtsi +++ b/arch/arm/boot/dts/at91sam9n12.dtsi @@ -376,6 +376,7 @@ rstc at fffffe00 { compatible = "atmel,at91sam9g45-rstc"; reg = <0xfffffe00 0x10>; + clocks = <&clk32k>; }; pit: timer at fffffe30 { @@ -388,6 +389,7 @@ shdwc at fffffe10 { compatible = "atmel,at91sam9x5-shdwc"; reg = <0xfffffe10 0x10>; + clocks = <&clk32k>; }; sckc at fffffe50 { @@ -431,16 +433,16 @@ compatible = "atmel,at91sam9x5-tcb"; reg = <0xf8008000 0x100>; interrupts = <17 IRQ_TYPE_LEVEL_HIGH 0>; - clocks = <&tcb_clk>; - clock-names = "t0_clk"; + clocks = <&tcb_clk>, <&clk32k>; + clock-names = "t0_clk", "slow_clk"; }; tcb1: timer at f800c000 { compatible = "atmel,at91sam9x5-tcb"; reg = <0xf800c000 0x100>; interrupts = <17 IRQ_TYPE_LEVEL_HIGH 0>; - clocks = <&tcb_clk>; - clock-names = "t0_clk"; + clocks = <&tcb_clk>, <&clk32k>; + clock-names = "t0_clk", "slow_clk"; }; dma: dma-controller at ffffec00 { @@ -891,6 +893,7 @@ compatible = "atmel,at91sam9260-wdt"; reg = <0xfffffe40 0x10>; interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>; + clocks = <&clk32k>; atmel,watchdog-type = "hardware"; atmel,reset-type = "all"; atmel,dbg-halt; @@ -901,6 +904,7 @@ compatible = "atmel,at91rm9200-rtc"; reg = <0xfffffeb0 0x40>; interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>; + clocks = <&clk32k>; status = "disabled"; }; -- 2.1.4