From mboxrd@z Thu Jan 1 00:00:00 1970 From: alexandre.belloni@free-electrons.com (Alexandre Belloni) Date: Fri, 31 Jul 2015 11:39:50 +0200 Subject: [PATCH 14/23] ARM: at91/dt: sama5d4: use slow clock where necessary In-Reply-To: <1438335599-3301-1-git-send-email-alexandre.belloni@free-electrons.com> References: <1438335599-3301-1-git-send-email-alexandre.belloni@free-electrons.com> Message-ID: <1438335599-3301-15-git-send-email-alexandre.belloni@free-electrons.com> To: linux-arm-kernel@lists.infradead.org List-Id: linux-arm-kernel.lists.infradead.org The watchdog, the reset controller, the RTC, the shutdown controller, the timer counters and the LCD PWM need the slow clock, add it where necessary. Signed-off-by: Alexandre Belloni --- arch/arm/boot/dts/sama5d4.dtsi | 12 ++++++++---- 1 file changed, 8 insertions(+), 4 deletions(-) diff --git a/arch/arm/boot/dts/sama5d4.dtsi b/arch/arm/boot/dts/sama5d4.dtsi index 3ee22ee13c5a..1d3abf2605e9 100644 --- a/arch/arm/boot/dts/sama5d4.dtsi +++ b/arch/arm/boot/dts/sama5d4.dtsi @@ -957,8 +957,8 @@ compatible = "atmel,at91sam9x5-tcb"; reg = <0xf801c000 0x100>; interrupts = <40 IRQ_TYPE_LEVEL_HIGH 0>; - clocks = <&tcb0_clk>; - clock-names = "t0_clk"; + clocks = <&tcb0_clk>, <&clk32k>; + clock-names = "t0_clk", "slow_clk"; }; macb0: ethernet at f8020000 { @@ -1185,8 +1185,8 @@ compatible = "atmel,at91sam9x5-tcb"; reg = <0xfc020000 0x100>; interrupts = <41 IRQ_TYPE_LEVEL_HIGH 0>; - clocks = <&tcb1_clk>; - clock-names = "t0_clk"; + clocks = <&tcb1_clk>, <&clk32k>; + clock-names = "t0_clk", "slow_clk"; }; adc0: adc at fc034000 { @@ -1279,11 +1279,13 @@ rstc at fc068600 { compatible = "atmel,at91sam9g45-rstc"; reg = <0xfc068600 0x10>; + clocks = <&clk32k>; }; shdwc at fc068610 { compatible = "atmel,at91sam9x5-shdwc"; reg = <0xfc068610 0x10>; + clocks = <&clk32k>; }; pit: timer at fc068630 { @@ -1296,6 +1298,7 @@ watchdog at fc068640 { compatible = "atmel,at91sam9260-wdt"; reg = <0xfc068640 0x10>; + clocks = <&clk32k>; status = "disabled"; }; @@ -1329,6 +1332,7 @@ compatible = "atmel,at91rm9200-rtc"; reg = <0xfc0686b0 0x30>; interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>; + clocks = <&clk32k>; }; dbgu: serial at fc069000 { -- 2.1.4