From mboxrd@z Thu Jan 1 00:00:00 1970 From: alexandre.belloni@free-electrons.com (Alexandre Belloni) Date: Fri, 31 Jul 2015 11:39:37 +0200 Subject: [PATCH 01/23] Documentation: dt: atmel-at91: add clocks to system timer, rstc and shdwc In-Reply-To: <1438335599-3301-1-git-send-email-alexandre.belloni@free-electrons.com> References: <1438335599-3301-1-git-send-email-alexandre.belloni@free-electrons.com> Message-ID: <1438335599-3301-2-git-send-email-alexandre.belloni@free-electrons.com> To: linux-arm-kernel@lists.infradead.org List-Id: linux-arm-kernel.lists.infradead.org The system timer (at91rm9200), the reset controller and the shutdown controller need an input clock. This is the slow clock and they will not function without it. Also fix the shutdown controller example. Signed-off-by: Alexandre Belloni --- Cc: Sebastian Reichel Cc: Dmitry Eremin-Solenikov Cc: linux-pm at vger.kernel.org Documentation/devicetree/bindings/arm/atmel-at91.txt | 11 ++++++++--- 1 file changed, 8 insertions(+), 3 deletions(-) diff --git a/Documentation/devicetree/bindings/arm/atmel-at91.txt b/Documentation/devicetree/bindings/arm/atmel-at91.txt index 424ac8cbfa08..209710cdf3aa 100644 --- a/Documentation/devicetree/bindings/arm/atmel-at91.txt +++ b/Documentation/devicetree/bindings/arm/atmel-at91.txt @@ -50,6 +50,7 @@ System Timer (ST) required properties: - reg: Should contain registers location and length - interrupts: Should contain interrupt for the ST which is the IRQ line shared across all System Controller members. +- clocks: phandle to input clock. Its subnodes can be: - watchdog: compatible should be "atmel,at91rm9200-wdt" @@ -89,12 +90,14 @@ RSTC Reset Controller required properties: - compatible: Should be "atmel,-rstc". can be "at91sam9260" or "at91sam9g45" - reg: Should contain registers location and length +- clocks: phandle to input clock. Example: rstc at fffffd00 { compatible = "atmel,at91sam9260-rstc"; reg = <0xfffffd00 0x10>; + clocks = <&clk32k>; }; RAMC SDRAM/DDR Controller required properties: @@ -117,6 +120,7 @@ required properties: - compatible: Should be "atmel,-shdwc". can be "at91sam9260", "at91sam9rl" or "at91sam9x5". - reg: Should contain registers location and length +- clocks: phandle to input clock. optional properties: - atmel,wakeup-mode: String, operation mode of the wakeup mode. @@ -135,9 +139,10 @@ optional at91sam9x5 properties: Example: - rstc at fffffd00 { - compatible = "atmel,at91sam9260-rstc"; - reg = <0xfffffd00 0x10>; + shdwc at fffffd10 { + compatible = "atmel,at91sam9260-shdwc"; + reg = <0xfffffd10 0x10>; + clocks = <&clk32k>; }; Special Function Registers (SFR) -- 2.1.4