From mboxrd@z Thu Jan 1 00:00:00 1970 From: alexandre.belloni@free-electrons.com (Alexandre Belloni) Date: Fri, 31 Jul 2015 11:39:39 +0200 Subject: [PATCH 03/23] Documentation: watchdog: at91sam9_wdt: add clocks property In-Reply-To: <1438335599-3301-1-git-send-email-alexandre.belloni@free-electrons.com> References: <1438335599-3301-1-git-send-email-alexandre.belloni@free-electrons.com> Message-ID: <1438335599-3301-4-git-send-email-alexandre.belloni@free-electrons.com> To: linux-arm-kernel@lists.infradead.org List-Id: linux-arm-kernel.lists.infradead.org The watchdog has an input clock, the slow clock. It is required as it will not function without it. Signed-off-by: Alexandre Belloni Reviewed-by: Guenter Roeck --- Cc: Wim Van Sebroeck Cc: linux-watchdog at vger.kernel.org Documentation/devicetree/bindings/watchdog/atmel-wdt.txt | 2 ++ 1 file changed, 2 insertions(+) diff --git a/Documentation/devicetree/bindings/watchdog/atmel-wdt.txt b/Documentation/devicetree/bindings/watchdog/atmel-wdt.txt index a4d869744f59..86fa6de1019b 100644 --- a/Documentation/devicetree/bindings/watchdog/atmel-wdt.txt +++ b/Documentation/devicetree/bindings/watchdog/atmel-wdt.txt @@ -6,6 +6,7 @@ Required properties: - compatible: must be "atmel,at91sam9260-wdt". - reg: physical base address of the controller and length of memory mapped region. +- clocks: phandle to input clock. Optional properties: - timeout-sec: contains the watchdog timeout in seconds. @@ -39,6 +40,7 @@ Example: compatible = "atmel,at91sam9260-wdt"; reg = <0xfffffd40 0x10>; interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>; + clocks = <&clk32k>; timeout-sec = <15>; atmel,watchdog-type = "hardware"; atmel,reset-type = "all"; -- 2.1.4