From mboxrd@z Thu Jan 1 00:00:00 1970 From: kaloz@openwrt.org (Imre Kaloz) Date: Fri, 31 Jul 2015 20:42:00 +0200 Subject: [PATCH] ARM: mvebu: fix GPIO config on the Linksys boards Message-ID: <1438368120-23860-1-git-send-email-kaloz@openwrt.org> To: linux-arm-kernel@lists.infradead.org List-Id: linux-arm-kernel.lists.infradead.org Some of the GPIO configs were wrong in the submitted DTS files, this patch fixes all affected boards. Signed-off-by: Imre Kaloz Cc: # v4.1 + --- arch/arm/boot/dts/armada-385-linksys.dtsi | 6 +++--- arch/arm/boot/dts/armada-xp-linksys-mamba.dts | 4 ++-- 2 files changed, 5 insertions(+), 5 deletions(-) diff --git a/arch/arm/boot/dts/armada-385-linksys.dtsi b/arch/arm/boot/dts/armada-385-linksys.dtsi index 74a9c6b..1b0075f 100644 --- a/arch/arm/boot/dts/armada-385-linksys.dtsi +++ b/arch/arm/boot/dts/armada-385-linksys.dtsi @@ -243,7 +243,7 @@ button at 2 { label = "Factory Reset Button"; linux,code = ; - gpios = <&gpio1 15 GPIO_ACTIVE_LOW>; + gpios = <&gpio0 29 GPIO_ACTIVE_LOW>; }; }; @@ -258,7 +258,7 @@ }; sata { - gpios = <&gpio1 22 GPIO_ACTIVE_HIGH>; + gpios = <&gpio1 22 GPIO_ACTIVE_LOW>; default-state = "off"; }; }; @@ -311,7 +311,7 @@ &pinctrl { keys_pin: keys-pin { - marvell,pins = "mpp24", "mpp47"; + marvell,pins = "mpp24", "mpp29"; marvell,function = "gpio"; }; diff --git a/arch/arm/boot/dts/armada-xp-linksys-mamba.dts b/arch/arm/boot/dts/armada-xp-linksys-mamba.dts index fdd187c..e767735 100644 --- a/arch/arm/boot/dts/armada-xp-linksys-mamba.dts +++ b/arch/arm/boot/dts/armada-xp-linksys-mamba.dts @@ -302,13 +302,13 @@ button at 1 { label = "WPS"; linux,code = ; - gpios = <&gpio1 0 GPIO_ACTIVE_HIGH>; + gpios = <&gpio1 0 GPIO_ACTIVE_LOW>; }; button at 2 { label = "Factory Reset Button"; linux,code = ; - gpios = <&gpio1 1 GPIO_ACTIVE_HIGH>; + gpios = <&gpio1 1 GPIO_ACTIVE_LOW>; }; }; -- 2.1.0