linux-arm-kernel.lists.infradead.org archive mirror
 help / color / mirror / Atom feed
From: yong.wu@mediatek.com (Yong Wu)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH v4 6/6] dts: mt8173: Add iommu/smi nodes for mt8173
Date: Mon, 3 Aug 2015 18:21:19 +0800	[thread overview]
Message-ID: <1438597279-2937-7-git-send-email-yong.wu@mediatek.com> (raw)
In-Reply-To: <1438597279-2937-1-git-send-email-yong.wu@mediatek.com>

This patch add the iommu/larbs nodes for mt8173

Signed-off-by: Yong Wu <yong.wu@mediatek.com>
---
 arch/arm64/boot/dts/mediatek/mt8173.dtsi | 81 ++++++++++++++++++++++++++++++++
 1 file changed, 81 insertions(+)

diff --git a/arch/arm64/boot/dts/mediatek/mt8173.dtsi b/arch/arm64/boot/dts/mediatek/mt8173.dtsi
index 6c3f047..a92956d 100644
--- a/arch/arm64/boot/dts/mediatek/mt8173.dtsi
+++ b/arch/arm64/boot/dts/mediatek/mt8173.dtsi
@@ -14,6 +14,7 @@
 #include <dt-bindings/clock/mt8173-clk.h>
 #include <dt-bindings/interrupt-controller/irq.h>
 #include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/memory/mt8173-larb-port.h>
 #include <dt-bindings/power/mt8173-power.h>
 #include <dt-bindings/reset-controller/mt8173-resets.h>
 #include "mt8173-pinfunc.h"
@@ -265,6 +266,17 @@
 			reg = <0 0x10200620 0 0x20>;
 		};
 
+		iommu: iommu at 10205000 {
+			compatible = "mediatek,mt8173-m4u";
+			reg = <0 0x10205000 0 0x1000>;
+			interrupts = <GIC_SPI 139 IRQ_TYPE_LEVEL_LOW>;
+			clocks = <&infracfg CLK_INFRA_M4U>;
+			clock-names = "bclk";
+			mediatek,larb = <&larb0 &larb1 &larb2
+					 &larb3 &larb4 &larb5>;
+			#iommu-cells = <2>;
+		};
+
 		apmixedsys: clock-controller at 10209000 {
 			compatible = "mediatek,mt8173-apmixedsys";
 			reg = <0 0x10209000 0 0x1000>;
@@ -501,29 +513,98 @@
 			#clock-cells = <1>;
 		};
 
+		larb0: larb at 14021000 {
+			compatible = "mediatek,mt8173-smi-larb";
+			reg = <0 0x14021000 0 0x1000>;
+			mediatek,smi = <&smi_common>;
+			power-domains = <&scpsys MT8173_POWER_DOMAIN_MM>;
+			clocks = <&mmsys CLK_MM_SMI_LARB0>,
+				 <&mmsys CLK_MM_SMI_LARB0>;
+			clock-names = "apb", "smi";
+		};
+
+		smi_common: smi at 14022000 {
+			compatible = "mediatek,mt8173-smi";
+			reg = <0 0x14022000 0 0x1000>;
+			power-domains = <&scpsys MT8173_POWER_DOMAIN_MM>;
+			clocks = <&mmsys CLK_MM_SMI_COMMON>,
+				 <&mmsys CLK_MM_SMI_COMMON>;
+			clock-names = "apb", "smi";
+		};
+
+		larb4: larb at 14027000 {
+			compatible = "mediatek,mt8173-smi-larb";
+			reg = <0 0x14027000 0 0x1000>;
+			mediatek,smi = <&smi_common>;
+			power-domains = <&scpsys MT8173_POWER_DOMAIN_MM>;
+			clocks = <&mmsys CLK_MM_SMI_LARB4>,
+				 <&mmsys CLK_MM_SMI_LARB4>;
+			clock-names = "apb", "smi";
+		};
+
 		imgsys: clock-controller at 15000000 {
 			compatible = "mediatek,mt8173-imgsys", "syscon";
 			reg = <0 0x15000000 0 0x1000>;
 			#clock-cells = <1>;
 		};
 
+		larb2: larb at 15001000 {
+			compatible = "mediatek,mt8173-smi-larb";
+			reg = <0 0x15001000 0 0x1000>;
+			mediatek,smi = <&smi_common>;
+			power-domains = <&scpsys MT8173_POWER_DOMAIN_ISP>;
+			clocks = <&imgsys CLK_IMG_LARB2_SMI>,
+				 <&imgsys CLK_IMG_LARB2_SMI>;
+			clock-names = "apb", "smi";
+		};
+
 		vdecsys: clock-controller at 16000000 {
 			compatible = "mediatek,mt8173-vdecsys", "syscon";
 			reg = <0 0x16000000 0 0x1000>;
 			#clock-cells = <1>;
 		};
 
+		larb1: larb at 16010000 {
+			compatible = "mediatek,mt8173-smi-larb";
+			reg = <0 0x16010000 0 0x1000>;
+			mediatek,smi = <&smi_common>;
+			power-domains = <&scpsys MT8173_POWER_DOMAIN_VDEC>;
+			clocks = <&vdecsys CLK_VDEC_CKEN>,
+				 <&vdecsys CLK_VDEC_LARB_CKEN>;
+			clock-names = "apb", "smi";
+		};
+
 		vencsys: clock-controller at 18000000 {
 			compatible = "mediatek,mt8173-vencsys", "syscon";
 			reg = <0 0x18000000 0 0x1000>;
 			#clock-cells = <1>;
 		};
 
+		larb3: larb at 18001000 {
+			compatible = "mediatek,mt8173-smi-larb";
+			reg = <0 0x18001000 0 0x1000>;
+			mediatek,smi = <&smi_common>;
+			power-domains = <&scpsys MT8173_POWER_DOMAIN_VENC>;
+			clocks = <&vencsys CLK_VENC_CKE1>,
+				 <&vencsys CLK_VENC_CKE0>;
+			clock-names = "apb", "smi";
+		};
+
 		vencltsys: clock-controller at 19000000 {
 			compatible = "mediatek,mt8173-vencltsys", "syscon";
 			reg = <0 0x19000000 0 0x1000>;
 			#clock-cells = <1>;
 		};
+
+		larb5: larb at 19001000 {
+			compatible = "mediatek,mt8173-smi-larb";
+			reg = <0 0x19001000 0 0x1000>;
+			mediatek,smi = <&smi_common>;
+			power-domains = <&scpsys MT8173_POWER_DOMAIN_VENC_LT>;
+			clocks = <&vencltsys CLK_VENCLT_CKE1>,
+				 <&vencltsys CLK_VENCLT_CKE0>;
+			clock-names = "apb", "smi";
+		};
 	};
 };
 
-- 
1.8.1.1.dirty

      parent reply	other threads:[~2015-08-03 10:21 UTC|newest]

Thread overview: 20+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2015-08-03 10:21 [PATCH v4 0/6] MT8173 IOMMU SUPPORT Yong Wu
2015-08-03 10:21 ` [PATCH v4 1/6] dt-bindings: iommu: Add binding for mediatek IOMMU Yong Wu
2015-08-03 10:21 ` [PATCH v4 2/6] dt-bindings: mediatek: Add smi dts binding Yong Wu
2015-08-03 10:21 ` [PATCH v4 3/6] iommu: add ARM short descriptor page table allocator Yong Wu
2015-09-16 15:58   ` Will Deacon
2015-09-17 14:54     ` Yong Wu
2015-09-22 14:12       ` Yong Wu
2015-10-09 15:57         ` Will Deacon
2015-10-09 17:41           ` Robin Murphy
2015-10-09 18:19             ` Will Deacon
2015-10-21 10:34               ` Yong Wu
2015-08-03 10:21 ` [PATCH v4 4/6] memory: mediatek: Add SMI driver Yong Wu
2015-08-11 14:56   ` Joerg Roedel
2015-08-12 12:39     ` Yong Wu
2015-08-03 10:21 ` [PATCH v4 5/6] iommu/mediatek: Add mt8173 IOMMU driver Yong Wu
2015-08-11 15:39   ` Joerg Roedel
2015-08-12 12:28     ` Yong Wu
2015-09-11 15:33   ` Robin Murphy
2015-09-15  5:53     ` Yong Wu
2015-08-03 10:21 ` Yong Wu [this message]

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1438597279-2937-7-git-send-email-yong.wu@mediatek.com \
    --to=yong.wu@mediatek.com \
    --cc=linux-arm-kernel@lists.infradead.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).