From: hdegoede@redhat.com (Hans de Goede)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH v4 2/2] mfd: axp20x: Add a cell for the usb power_supply part of the axp20x PMICs
Date: Sat, 8 Aug 2015 17:58:41 +0200 [thread overview]
Message-ID: <1439049521-30766-2-git-send-email-hdegoede@redhat.com> (raw)
In-Reply-To: <1439049521-30766-1-git-send-email-hdegoede@redhat.com>
Add a cell for the usb power_supply part of the axp20x PMICs.
Note that this cell is only for the usb power_supply part and not the
ac-power / battery-charger / rtc-backup-bat-charger bits.
Depending on the board each of those must be enabled / disabled separately
in devicetree as most boards do not use all 4. So in dt each one needs its
own child-node of the axp20x node. Another reason for using separate child
nodes for each is so that other devicetree nodes can have a power-supply
property with a phandle referencing a node representing a single
power-supply.
The decision to use a separate devicetree node for each is reflected on
the kernel side by each getting its own mfd-cell / platform_device and
platform-driver.
Note this commit also makes some whitespace changes to the intialization
of existing cells in axp20x_cells, these are pure whitespace changes,
functionally nothing changes.
Cc: Bruno Pr?mont <bonbons@linux-vserver.org>
Signed-off-by: Bruno Pr?mont <bonbons@linux-vserver.org>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Acked-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Acked-by: Lee Jones <lee.jones@linaro.org>
---
Changes in v2:
-Use DEFINE_RES_IRQ_NAMED
-Change indentation of axp20x_cells initializers to avoid line wrapping
Changes in v3:
-Improve commit message
-Add Bruno's S-o-b
---
drivers/mfd/axp20x.c | 20 ++++++++++++++++----
1 file changed, 16 insertions(+), 4 deletions(-)
diff --git a/drivers/mfd/axp20x.c b/drivers/mfd/axp20x.c
index d9f2f96..3f576b7 100644
--- a/drivers/mfd/axp20x.c
+++ b/drivers/mfd/axp20x.c
@@ -140,6 +140,13 @@ static struct resource axp20x_pek_resources[] = {
},
};
+static struct resource axp20x_usb_power_supply_resources[] = {
+ DEFINE_RES_IRQ_NAMED(AXP20X_IRQ_VBUS_PLUGIN, "VBUS_PLUGIN"),
+ DEFINE_RES_IRQ_NAMED(AXP20X_IRQ_VBUS_REMOVAL, "VBUS_REMOVAL"),
+ DEFINE_RES_IRQ_NAMED(AXP20X_IRQ_VBUS_VALID, "VBUS_VALID"),
+ DEFINE_RES_IRQ_NAMED(AXP20X_IRQ_VBUS_NOT_VALID, "VBUS_NOT_VALID"),
+};
+
static struct resource axp22x_pek_resources[] = {
{
.name = "PEK_DBR",
@@ -432,11 +439,16 @@ static const struct regmap_irq_chip axp288_regmap_irq_chip = {
static struct mfd_cell axp20x_cells[] = {
{
- .name = "axp20x-pek",
- .num_resources = ARRAY_SIZE(axp20x_pek_resources),
- .resources = axp20x_pek_resources,
+ .name = "axp20x-pek",
+ .num_resources = ARRAY_SIZE(axp20x_pek_resources),
+ .resources = axp20x_pek_resources,
}, {
- .name = "axp20x-regulator",
+ .name = "axp20x-regulator",
+ }, {
+ .name = "axp20x-usb-power-supply",
+ .of_compatible = "x-powers,axp202-usb-power-supply",
+ .num_resources = ARRAY_SIZE(axp20x_usb_power_supply_resources),
+ .resources = axp20x_usb_power_supply_resources,
},
};
--
2.4.3
next prev parent reply other threads:[~2015-08-08 15:58 UTC|newest]
Thread overview: 8+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-08-08 15:58 [PATCH v4 1/2] mfd: axp20x: Add missing registers, and mark more registers volatile Hans de Goede
2015-08-08 15:58 ` Hans de Goede [this message]
2015-08-11 14:18 ` [PATCH v4 2/2] mfd: axp20x: Add a cell for the usb power_supply part of the axp20x PMICs Lee Jones
2015-08-12 8:37 ` Hans de Goede
2015-08-12 9:29 ` Lee Jones
2015-08-12 10:20 ` Hans de Goede
2015-08-12 10:26 ` Lee Jones
2015-08-11 14:17 ` [PATCH v4 1/2] mfd: axp20x: Add missing registers, and mark more registers volatile Lee Jones
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1439049521-30766-2-git-send-email-hdegoede@redhat.com \
--to=hdegoede@redhat.com \
--cc=linux-arm-kernel@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).