linux-arm-kernel.lists.infradead.org archive mirror
 help / color / mirror / Atom feed
From: daniel.lezcano@linaro.org (Daniel Lezcano)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH 12/74] clockevents/drivers/cadence_ttc: Migrate to new 'set-state' interface
Date: Mon, 10 Aug 2015 11:51:29 +0200	[thread overview]
Message-ID: <1439200352-26767-12-git-send-email-daniel.lezcano@linaro.org> (raw)
In-Reply-To: <1439200352-26767-1-git-send-email-daniel.lezcano@linaro.org>

From: Viresh Kumar <viresh.kumar@linaro.org>

Migrate cadence_ttc driver to the new 'set-state' interface provided by
clockevents core, the earlier 'set-mode' interface is marked obsolete
now.

This also enables us to implement callbacks for new states of clockevent
devices, for example: ONESHOT_STOPPED.

Cc: Michal Simek <michal.simek@xilinx.com>
Cc: S?ren Brinkmann <soren.brinkmann@xilinx.com>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Tested-by: S?ren Brinkmann <soren.brinkmann@xilinx.com>
---
 drivers/clocksource/cadence_ttc_timer.c | 59 ++++++++++++++++++---------------
 1 file changed, 32 insertions(+), 27 deletions(-)

diff --git a/drivers/clocksource/cadence_ttc_timer.c b/drivers/clocksource/cadence_ttc_timer.c
index 510c8a1..e47e0e0 100644
--- a/drivers/clocksource/cadence_ttc_timer.c
+++ b/drivers/clocksource/cadence_ttc_timer.c
@@ -191,40 +191,42 @@ static int ttc_set_next_event(unsigned long cycles,
 }
 
 /**
- * ttc_set_mode - Sets the mode of timer
+ * ttc_set_{shutdown|oneshot|periodic} - Sets the state of timer
  *
- * @mode:	Mode to be set
  * @evt:	Address of clock event instance
  **/
-static void ttc_set_mode(enum clock_event_mode mode,
-					struct clock_event_device *evt)
+static int ttc_shutdown(struct clock_event_device *evt)
 {
 	struct ttc_timer_clockevent *ttce = to_ttc_timer_clkevent(evt);
 	struct ttc_timer *timer = &ttce->ttc;
 	u32 ctrl_reg;
 
-	switch (mode) {
-	case CLOCK_EVT_MODE_PERIODIC:
-		ttc_set_interval(timer, DIV_ROUND_CLOSEST(ttce->ttc.freq,
-						PRESCALE * HZ));
-		break;
-	case CLOCK_EVT_MODE_ONESHOT:
-	case CLOCK_EVT_MODE_UNUSED:
-	case CLOCK_EVT_MODE_SHUTDOWN:
-		ctrl_reg = readl_relaxed(timer->base_addr +
-					TTC_CNT_CNTRL_OFFSET);
-		ctrl_reg |= TTC_CNT_CNTRL_DISABLE_MASK;
-		writel_relaxed(ctrl_reg,
-				timer->base_addr + TTC_CNT_CNTRL_OFFSET);
-		break;
-	case CLOCK_EVT_MODE_RESUME:
-		ctrl_reg = readl_relaxed(timer->base_addr +
-					TTC_CNT_CNTRL_OFFSET);
-		ctrl_reg &= ~TTC_CNT_CNTRL_DISABLE_MASK;
-		writel_relaxed(ctrl_reg,
-				timer->base_addr + TTC_CNT_CNTRL_OFFSET);
-		break;
-	}
+	ctrl_reg = readl_relaxed(timer->base_addr + TTC_CNT_CNTRL_OFFSET);
+	ctrl_reg |= TTC_CNT_CNTRL_DISABLE_MASK;
+	writel_relaxed(ctrl_reg, timer->base_addr + TTC_CNT_CNTRL_OFFSET);
+	return 0;
+}
+
+static int ttc_set_periodic(struct clock_event_device *evt)
+{
+	struct ttc_timer_clockevent *ttce = to_ttc_timer_clkevent(evt);
+	struct ttc_timer *timer = &ttce->ttc;
+
+	ttc_set_interval(timer,
+			 DIV_ROUND_CLOSEST(ttce->ttc.freq, PRESCALE * HZ));
+	return 0;
+}
+
+static int ttc_resume(struct clock_event_device *evt)
+{
+	struct ttc_timer_clockevent *ttce = to_ttc_timer_clkevent(evt);
+	struct ttc_timer *timer = &ttce->ttc;
+	u32 ctrl_reg;
+
+	ctrl_reg = readl_relaxed(timer->base_addr + TTC_CNT_CNTRL_OFFSET);
+	ctrl_reg &= ~TTC_CNT_CNTRL_DISABLE_MASK;
+	writel_relaxed(ctrl_reg, timer->base_addr + TTC_CNT_CNTRL_OFFSET);
+	return 0;
 }
 
 static int ttc_rate_change_clocksource_cb(struct notifier_block *nb,
@@ -430,7 +432,10 @@ static void __init ttc_setup_clockevent(struct clk *clk,
 	ttcce->ce.name = "ttc_clockevent";
 	ttcce->ce.features = CLOCK_EVT_FEAT_PERIODIC | CLOCK_EVT_FEAT_ONESHOT;
 	ttcce->ce.set_next_event = ttc_set_next_event;
-	ttcce->ce.set_mode = ttc_set_mode;
+	ttcce->ce.set_state_shutdown = ttc_shutdown;
+	ttcce->ce.set_state_periodic = ttc_set_periodic;
+	ttcce->ce.set_state_oneshot = ttc_shutdown;
+	ttcce->ce.tick_resume = ttc_resume;
 	ttcce->ce.rating = 200;
 	ttcce->ce.irq = irq;
 	ttcce->ce.cpumask = cpu_possible_mask;
-- 
1.9.1

  parent reply	other threads:[~2015-08-10  9:51 UTC|newest]

Thread overview: 20+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
     [not found] <55C87382.4070309@linaro.org>
     [not found] ` <1439200352-26767-1-git-send-email-daniel.lezcano@linaro.org>
2015-08-10  9:51   ` [PATCH 02/74] clockevents/drivers/arm_global_timer: Migrate to new 'set-state' interface Daniel Lezcano
2015-08-10  9:51   ` [PATCH 08/74] clockevents/drivers/exynos_mct: Remove unneeded container_of() Daniel Lezcano
2015-08-10  9:51   ` Daniel Lezcano [this message]
2015-08-10  9:51   ` [PATCH 13/74] clockevents/drivers/clps711x: Migrate to new 'set-state' interface Daniel Lezcano
2015-08-10  9:51   ` [PATCH 18/74] clockevents/drivers/meson6: " Daniel Lezcano
2015-08-10  9:51   ` [PATCH 22/74] clockevents/drivers/mtk: " Daniel Lezcano
2015-08-10  9:51   ` [PATCH 27/74] clockevents/drivers/rockchip: " Daniel Lezcano
2015-08-10  9:51   ` [PATCH 32/74] clockevents/drivers/sun4i: " Daniel Lezcano
2015-08-10  9:51   ` [PATCH 35/74] clockevents/drivers/efm32: " Daniel Lezcano
2015-08-10  9:51   ` [PATCH 37/74] clockevents/drivers/atlas7: " Daniel Lezcano
2015-08-10  9:51   ` [PATCH 40/74] clockevents/drivers/digicolor: " Daniel Lezcano
2015-08-10  9:51   ` [PATCH 42/74] clockevents/drivers/keystone: " Daniel Lezcano
2015-08-10 16:55     ` santosh.shilimkar at oracle.com
2015-08-10  9:52   ` [PATCH 43/74] clockevents/drivers/prima2: " Daniel Lezcano
2015-08-10  9:52   ` [PATCH 44/74] clockevents/drivers/stm32: " Daniel Lezcano
2015-08-10  9:52   ` [PATCH 45/74] clockevents/drivers/sun5i: " Daniel Lezcano
2015-08-10  9:52   ` [PATCH 46/74] clockevents/drivers/u300: " Daniel Lezcano
2015-08-10  9:52   ` [PATCH 48/74] clockevents/drivers/vt8500: " Daniel Lezcano
2015-08-10  9:52   ` [PATCH 50/74] clockevents/drivers/tcb_clksrc: " Daniel Lezcano
2015-08-10  9:52   ` [PATCH 51/74] clockevents/drivers/exynos_mct: " Daniel Lezcano

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1439200352-26767-12-git-send-email-daniel.lezcano@linaro.org \
    --to=daniel.lezcano@linaro.org \
    --cc=linux-arm-kernel@lists.infradead.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).