From: shawnguo@kernel.org (Shawn Guo)
To: linux-arm-kernel@lists.infradead.org
Subject: [GIT PULL 2/3] ARM: imx: device tree changes for 4.3
Date: Wed, 12 Aug 2015 00:42:30 +0800 [thread overview]
Message-ID: <1439311351-5268-2-git-send-email-shawnguo@kernel.org> (raw)
In-Reply-To: <1439311351-5268-1-git-send-email-shawnguo@kernel.org>
Hi arm-soc maintainers,
This is the i.MX device tree updates for 4.3. To resolve the dependency
between imx6ul clock driver and DTS files on those clock ID definitions,
the i.MX clock changes are pulled into the branch. But since i.MX clock
drivers are now in drivers/clk/imx/ folder, I sent the clock changes to
Mike and Stephen. I've already asked them to keep my clock branch
stable/non-reabasable. So it should be safe pull this DT change set
into arm-soc.
Shawn
The following changes since commit 787b4271a6a0c09775241770782b22762f40bd6e:
clk: imx: add imx6ul clk tree support (2015-07-14 15:02:13 +0800)
are available in the git repository at:
git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux.git tags/imx-dt-4.3
for you to fetch changes up to 360325755336893869c419013ec0e33757432cbb:
ARM: dts: imx6ul: add snvs power key support (2015-08-11 23:15:27 +0800)
----------------------------------------------------------------
The i.MX device tree updates for 4.3:
- Add audio and eTSEC device support and update dspi node for LS1021A.
- Add initial i.MX6UL and imx6ul-14x14-evk board support, and enable
a bunch of device support for i.MX6UL, including RTC, power key, USB,
QSPI, and dual FEC.
- Enable HDMI and LVDS dual display support for a few imx6qdl boards.
- Support of imx6sl-warp board rev1.12, the version which will be
publicly available for the customers.
- A few i.MX7D device additions, watchdog, cortex-a7 coresight
components, RTC, power key, power off.
- Some Vybrid updates: add device support for I2C, QSPI, eSDHC etc.,
update ADC node, and define stdout-path property.
- A few random updates for i.MX27 and i.MX53 devices.
----------------------------------------------------------------
Alison Wang (1):
ARM: dts: ls1021a: Add dts nodes for audio on LS1021A
Anson Huang (4):
ARM: dts: imx6sx: correct property name for wakeup source
ARM: dts: imx6ul: enable GPC as extended interrupt controller
ARM: dts: imx6ul: add RTC support
ARM: dts: imx6ul: add snvs power key support
Claudiu Manoil (2):
ARM: dts: ls1021a: Add the eTSEC controller nodes
ARM: dts: ls1021a: Enable the eTSEC ports on QDS and TWR
Cory Tusar (4):
ARM: dts: vf610: Extend I2C support to all available buses.
ARM: dts: vf610: Add missing QuadSPI register mapping and names.
ARM: dts: vfxxx: Include support for qspi1 functionality.
ARM: dts: vfxxx: Include support for esdhc0 functionality.
Fabio Estevam (7):
ARM: dts: imx6sl-warp: Add the SD2_RESET pin
ARM: dts: imx6qdl-sabreauto: Add HDMI support
ARM: dts: imx6qdl-sabresd: Allow HDMI and LVDS to work simultaneously
ARM: dts: imx6sl-warp: Add changes for rev1.12
ARM: dts: imx6qdl-sabrelite: Allow HDMI and LVDS to work simultaneously
ARM: dts: imx6qdl-nitrogen6x: Allow HDMI and LVDS to work simultaneously
ARM: dts: imx6qdl-sabreauto: Allow HDMI and LVDS to work simultaneously
Frank Li (11):
ARM: dts: imx7d: add watch dog support
ARM: dts: imx6sx: enable snvs power key
ARM: dts: imx7d: add cortex-a7 coresight component
Document: dt: binding: imx: update document for imx6ul support
ARM: dts: add i.mx6ul pin function include file
ARM: dts: imx: add imx6ul and imx6ul evk board support
ARM: dts: imx: update snvs to use syscon access register
ARM: dts: imx6ul: add usb host and function support
ARM: dts: imx6ul: fix low case define in imx6ul-pinfunc.h
ARM: dts: imx6ul: add qspi support
ARM: dts: imx7d: enable snvs rtc, onoffkey and power off
Fugang Duan (2):
ARM: dts: imx: add fec1 and fec2 nodes for SOC i.MX6UL
ARM: dts: imx6ul-14x14-evk: add fec1 and fec2 support
Haikun Wang (1):
ARM: dts: ls1021a: Update 'dspi' device node compatible string
Lucas Stach (1):
ARM: dts: imx53-qsb: select open-drain mode for i2c1 pads
Peter Chen (1):
ARM: imx6qdl-sabreauto.dtsi: enable USB support
Peter Seiderer (2):
ARM: dts: nitrogen6x: add CAN support
ARM: dts: sabrelite: add CAN support
Philippe Reynes (1):
ARM: dts: imx27: add support of internal rtc
Sanchayan Maity (1):
ARM: dts: vfxxx: Add io-channel-cells property for ADC node
Shengjiu Wang (1):
ARM: dts: imx6qdl-sabreauto: Add audio support
Stefan Agner (2):
ARM: dts: vf-colibri: define stdout-path property
ARM: dts: add property for maximum ADC clock frequencies
Tim Harvey (1):
ARM: dts: ventana: add UHS-I support for Ventana boards
.../devicetree/bindings/clock/imx6ul-clock.txt | 13 +
.../bindings/pinctrl/fsl,imx6ul-pinctrl.txt | 36 +
arch/arm/boot/dts/Makefile | 2 +
arch/arm/boot/dts/imx27.dtsi | 9 +
arch/arm/boot/dts/imx53-qsb-common.dtsi | 5 +-
arch/arm/boot/dts/imx53-qsrb.dts | 14 +-
arch/arm/boot/dts/imx6qdl-gw51xx.dtsi | 1 -
arch/arm/boot/dts/imx6qdl-gw52xx.dtsi | 35 +-
arch/arm/boot/dts/imx6qdl-gw53xx.dtsi | 35 +-
arch/arm/boot/dts/imx6qdl-gw54xx.dtsi | 34 +-
arch/arm/boot/dts/imx6qdl-gw551x.dtsi | 1 -
arch/arm/boot/dts/imx6qdl-gw552x.dtsi | 1 -
arch/arm/boot/dts/imx6qdl-nitrogen6x.dtsi | 39 +
arch/arm/boot/dts/imx6qdl-sabreauto.dtsi | 137 +++
arch/arm/boot/dts/imx6qdl-sabrelite.dtsi | 39 +
arch/arm/boot/dts/imx6qdl-sabresd.dtsi | 7 +
arch/arm/boot/dts/imx6qdl.dtsi | 52 +-
arch/arm/boot/dts/imx6sl-warp.dts | 32 +-
arch/arm/boot/dts/imx6sl.dtsi | 21 +-
arch/arm/boot/dts/imx6sx.dtsi | 28 +-
arch/arm/boot/dts/imx6ul-14x14-evk.dts | 343 ++++++++
arch/arm/boot/dts/imx6ul-pinfunc.h | 938 +++++++++++++++++++++
arch/arm/boot/dts/imx6ul.dtsi | 707 ++++++++++++++++
arch/arm/boot/dts/imx7d.dtsi | 260 +++++-
arch/arm/boot/dts/ls1021a-qds.dts | 89 ++
arch/arm/boot/dts/ls1021a-twr.dts | 81 ++
arch/arm/boot/dts/ls1021a.dtsi | 106 ++-
arch/arm/boot/dts/vf-colibri-eval-v3.dtsi | 2 +-
arch/arm/boot/dts/vfxxx.dtsi | 85 +-
29 files changed, 3062 insertions(+), 90 deletions(-)
create mode 100644 Documentation/devicetree/bindings/clock/imx6ul-clock.txt
create mode 100644 Documentation/devicetree/bindings/pinctrl/fsl,imx6ul-pinctrl.txt
create mode 100644 arch/arm/boot/dts/imx6ul-14x14-evk.dts
create mode 100644 arch/arm/boot/dts/imx6ul-pinfunc.h
create mode 100644 arch/arm/boot/dts/imx6ul.dtsi
next prev parent reply other threads:[~2015-08-11 16:42 UTC|newest]
Thread overview: 10+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-08-11 16:42 [GIT PULL 1/3] ARM: imx: soc updates for 4.3 Shawn Guo
2015-08-11 16:42 ` Shawn Guo [this message]
2015-08-18 20:15 ` [GIT PULL 2/3] ARM: imx: device tree changes " Olof Johansson
2015-08-11 16:42 ` [GIT PULL 3/3] ARM: imx: defconfig updates " Shawn Guo
2015-08-18 20:16 ` Olof Johansson
2015-08-18 20:14 ` [GIT PULL 1/3] ARM: imx: soc " Olof Johansson
2015-08-19 17:55 ` Olof Johansson
2015-08-19 18:17 ` Fabio Estevam
2015-08-19 20:36 ` Fabio Estevam
2015-08-20 9:06 ` Shawn Guo
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1439311351-5268-2-git-send-email-shawnguo@kernel.org \
--to=shawnguo@kernel.org \
--cc=linux-arm-kernel@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).