linux-arm-kernel.lists.infradead.org archive mirror
 help / color / mirror / Atom feed
From: dongsheng.wang@freescale.com (Dongsheng Wang)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH v2 1/2] soc/fsl: add freescale dir for SOC specific drivers
Date: Wed, 12 Aug 2015 13:53:26 +0800	[thread overview]
Message-ID: <1439358807-9024-1-git-send-email-dongsheng.wang@freescale.com> (raw)

From: Wang Dongsheng <dongsheng.wang@freescale.com>

Some Freescale device drivers need to move to soc/, because these
drivers are specific drivers. Before the soc/ to be created, the
drivers had been there arch/ or drivers/misc/, but now soc/ dir
is a better choice.

Signed-off-by: Wang Dongsheng <dongsheng.wang@freescale.com>
---
*V2*
Rebase for last kernel. Resend this patch, this patch is one year ago.
Sorry I haven't had the time to push this patch before.

diff --git a/drivers/soc/Kconfig b/drivers/soc/Kconfig
index 96ddecb..b5c5179 100644
--- a/drivers/soc/Kconfig
+++ b/drivers/soc/Kconfig
@@ -5,5 +5,6 @@ source "drivers/soc/qcom/Kconfig"
 source "drivers/soc/sunxi/Kconfig"
 source "drivers/soc/ti/Kconfig"
 source "drivers/soc/versatile/Kconfig"
+source "drivers/soc/fsl/Kconfig"
 
 endmenu
diff --git a/drivers/soc/Makefile b/drivers/soc/Makefile
index 7dc7c0d..1caf1d6 100644
--- a/drivers/soc/Makefile
+++ b/drivers/soc/Makefile
@@ -8,3 +8,4 @@ obj-$(CONFIG_ARCH_SUNXI)	+= sunxi/
 obj-$(CONFIG_ARCH_TEGRA)	+= tegra/
 obj-$(CONFIG_SOC_TI)		+= ti/
 obj-$(CONFIG_PLAT_VERSATILE)	+= versatile/
+obj-$(CONFIG_FSL_SOC_DRIVERS)	+= fsl/
diff --git a/drivers/soc/fsl/Kconfig b/drivers/soc/fsl/Kconfig
new file mode 100644
index 0000000..863d1ef
--- /dev/null
+++ b/drivers/soc/fsl/Kconfig
@@ -0,0 +1,18 @@
+#
+# Freescale SOC drivers
+#
+menuconfig FSL_SOC_DRIVERS
+	bool "Freescale Soc Drivers"
+	default n
+	help
+	  Say y here to enable Freescale Soc Device Drivers support.
+	  The Soc Drivers provides the device driver that is a specific
+	  block or feature on Freescale platform.
+
+if FSL_SOC_DRIVERS
+
+if ARM
+source "drivers/soc/fsl/Kconfig.arm"
+endif
+
+endif
diff --git a/drivers/soc/fsl/Kconfig.arm b/drivers/soc/fsl/Kconfig.arm
new file mode 100644
index 0000000..8c90b82
--- /dev/null
+++ b/drivers/soc/fsl/Kconfig.arm
@@ -0,0 +1,16 @@
+#
+# Freescale ARM SOC Drivers
+#
+
+config	LS1_SOC_DRIVERS
+	bool "LS1021A Soc Drivers"
+	depends on SOC_LS1021A
+	default n
+	help
+	Say y here to enable Freescale LS1021A Soc Device Drivers support.
+	The Soc Drivers provides the device driver that is a specific block
+	or feature on LS1021A platform.
+
+if LS1_SOC_DRIVERS
+	source "drivers/soc/fsl/ls1/Kconfig"
+endif
diff --git a/drivers/soc/fsl/Makefile b/drivers/soc/fsl/Makefile
new file mode 100644
index 0000000..b4215dd
--- /dev/null
+++ b/drivers/soc/fsl/Makefile
@@ -0,0 +1,6 @@
+#
+# Makefile for Freescale Soc specific device drivers.
+#
+
+obj-$(CONFIG_LS1_SOC_DRIVERS) += ls1/
+
diff --git a/drivers/soc/fsl/ls1/Kconfig b/drivers/soc/fsl/ls1/Kconfig
new file mode 100644
index 0000000..7556f44
--- /dev/null
+++ b/drivers/soc/fsl/ls1/Kconfig
@@ -0,0 +1,3 @@
+#
+# LS-1 Soc drivers
+#
-- 
2.1.0.27.g96db324

             reply	other threads:[~2015-08-12  5:53 UTC|newest]

Thread overview: 10+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2015-08-12  5:53 Dongsheng Wang [this message]
2015-08-12  5:53 ` [PATCH 2/2] soc/fsl: add ftm alarm driver for ls1021a platform Dongsheng Wang
2015-08-13 13:54   ` Linus Walleij
2015-08-14  3:12     ` Wang Dongsheng
2015-08-14 10:06       ` Linus Walleij
2015-08-21  3:07         ` Wang Dongsheng
2015-08-12  7:44 ` [PATCH v2 1/2] soc/fsl: add freescale dir for SOC specific drivers Russell King - ARM Linux
2015-08-12  8:01   ` Wang Dongsheng
2015-08-12  8:03     ` Russell King - ARM Linux
2015-08-12  8:10       ` Wang Dongsheng

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1439358807-9024-1-git-send-email-dongsheng.wang@freescale.com \
    --to=dongsheng.wang@freescale.com \
    --cc=linux-arm-kernel@lists.infradead.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).