From mboxrd@z Thu Jan 1 00:00:00 1970 From: eric@anholt.net (Eric Anholt) Date: Wed, 12 Aug 2015 17:56:20 -0700 Subject: [PATCH 7/7] ARM: bcm2835: Add VC4 to the device tree. In-Reply-To: <1439427380-2436-1-git-send-email-eric@anholt.net> References: <1439427380-2436-1-git-send-email-eric@anholt.net> Message-ID: <1439427380-2436-8-git-send-email-eric@anholt.net> To: linux-arm-kernel@lists.infradead.org List-Id: linux-arm-kernel.lists.infradead.org Signed-off-by: Eric Anholt --- arch/arm/boot/dts/bcm2835.dtsi | 43 ++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 43 insertions(+) diff --git a/arch/arm/boot/dts/bcm2835.dtsi b/arch/arm/boot/dts/bcm2835.dtsi index 8f3ba88..dda67aa 100644 --- a/arch/arm/boot/dts/bcm2835.dtsi +++ b/arch/arm/boot/dts/bcm2835.dtsi @@ -1,4 +1,5 @@ #include +#include #include "skeleton.dtsi" / { @@ -167,6 +168,48 @@ arm-pmu { compatible = "arm,arm1176-pmu"; }; + + hdmi: brcm,vc4-hdmi at 7e902000 { + compatible = "brcm,vc4-hdmi"; + reg = <0x7e902000 0x600>, + <0x7e808000 0x100>; + interrupts = <2 8>, <2 9>; + ddc = <&i2c2>; + hpd-gpio = <&gpio 46 GPIO_ACTIVE_HIGH>; + crtc = <&pv2>; + }; + + pv0: brcm,vc4-pixelvalve at 7e206000 { + compatible = "brcm,vc4-pixelvalve"; + reg = <0x7e206000 0x100>; + interrupts = <2 13>; /* pwa2 */ + }; + + pv1: brcm,vc4-pixelvalve at 7e207000 { + compatible = "brcm,vc4-pixelvalve"; + reg = <0x7e207000 0x100>; + interrupts = <2 14>; /* pwa1 */ + }; + + pv2: brcm,vc4-pixelvalve at 7e807000 { + compatible = "brcm,vc4-pixelvalve"; + reg = <0x7e807000 0x100>; + interrupts = <2 10>; /* pixelvalve */ + }; + + hvs: brcm,hvs at 7e400000 { + compatible = "brcm,vc4-hvs"; + reg = <0x7e400000 0x6000>; + interrupts = <2 1>; + }; + + vc4: vc4 at 0x7e4c0000 { + compatible = "brcm,vc4"; + + crtcs = <&pv0>, <&pv1>, <&pv2>; + encoders = <&hdmi>; + hvss = <&hvs>; + }; }; clocks { -- 2.1.4