* [PATCH 1/2] ARM: dts: imx6qdl-nitrogen6x: add Okaya LCD display
2015-05-22 17:14 [PATCH 0/2] ARM: dts: add Okaya LCD display for Nitrogen and Sabrelite Gary Bisson
@ 2015-05-22 17:14 ` Gary Bisson
2015-05-22 17:14 ` [PATCH 2/2] ARM: dts: imx6qdl-sabrelite: " Gary Bisson
` (4 subsequent siblings)
5 siblings, 0 replies; 16+ messages in thread
From: Gary Bisson @ 2015-05-22 17:14 UTC (permalink / raw)
To: linux-arm-kernel
This patch adds support for the 7" LCD display available for Nitrogen6x:
http://boundarydevices.com/product/7-800x480-display/
Signed-off-by: Gary Bisson <gary.bisson@boundarydevices.com>
---
arch/arm/boot/dts/imx6qdl-nitrogen6x.dtsi | 70 +++++++++++++++++++++++++++++++
1 file changed, 70 insertions(+)
diff --git a/arch/arm/boot/dts/imx6qdl-nitrogen6x.dtsi b/arch/arm/boot/dts/imx6qdl-nitrogen6x.dtsi
index 3af16df..7097593 100644
--- a/arch/arm/boot/dts/imx6qdl-nitrogen6x.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-nitrogen6x.dtsi
@@ -131,6 +131,39 @@
status = "okay";
};
+ lcd_display: display at di0 {
+ compatible = "fsl,imx-parallel-display";
+ interface-pix-fmt = "bgr666";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_j15>;
+ status = "okay";
+
+ port {
+ lcd_display_in: endpoint {
+ remote-endpoint = <&ipu1_di0_disp0>;
+ };
+ };
+
+ display-timings {
+ okaya_800x480 {
+ native-mode;
+ clock-frequency = <30000000>;
+ hactive = <800>;
+ vactive = <480>;
+ hback-porch = <40>;
+ hsync-len = <48>;
+ hfront-porch = <40>;
+ vback-porch = <29>;
+ vsync-len = <3>;
+ vfront-porch = <13>;
+ hsync-active = <0>;
+ vsync-active = <0>;
+ de-active = <1>;
+ pixelclk-active = <0>;
+ };
+ };
+ };
+
panel {
compatible = "hannstar,hsd100pxn1";
backlight = <&backlight_lvds>;
@@ -315,6 +348,39 @@
>;
};
+ pinctrl_j15: j15grp {
+ fsl,pins = <
+ MX6QDL_PAD_DI0_DISP_CLK__IPU1_DI0_DISP_CLK 0x10
+ MX6QDL_PAD_DI0_PIN15__IPU1_DI0_PIN15 0x10
+ MX6QDL_PAD_DI0_PIN2__IPU1_DI0_PIN02 0x10
+ MX6QDL_PAD_DI0_PIN3__IPU1_DI0_PIN03 0x10
+ MX6QDL_PAD_DISP0_DAT0__IPU1_DISP0_DATA00 0x10
+ MX6QDL_PAD_DISP0_DAT1__IPU1_DISP0_DATA01 0x10
+ MX6QDL_PAD_DISP0_DAT2__IPU1_DISP0_DATA02 0x10
+ MX6QDL_PAD_DISP0_DAT3__IPU1_DISP0_DATA03 0x10
+ MX6QDL_PAD_DISP0_DAT4__IPU1_DISP0_DATA04 0x10
+ MX6QDL_PAD_DISP0_DAT5__IPU1_DISP0_DATA05 0x10
+ MX6QDL_PAD_DISP0_DAT6__IPU1_DISP0_DATA06 0x10
+ MX6QDL_PAD_DISP0_DAT7__IPU1_DISP0_DATA07 0x10
+ MX6QDL_PAD_DISP0_DAT8__IPU1_DISP0_DATA08 0x10
+ MX6QDL_PAD_DISP0_DAT9__IPU1_DISP0_DATA09 0x10
+ MX6QDL_PAD_DISP0_DAT10__IPU1_DISP0_DATA10 0x10
+ MX6QDL_PAD_DISP0_DAT11__IPU1_DISP0_DATA11 0x10
+ MX6QDL_PAD_DISP0_DAT12__IPU1_DISP0_DATA12 0x10
+ MX6QDL_PAD_DISP0_DAT13__IPU1_DISP0_DATA13 0x10
+ MX6QDL_PAD_DISP0_DAT14__IPU1_DISP0_DATA14 0x10
+ MX6QDL_PAD_DISP0_DAT15__IPU1_DISP0_DATA15 0x10
+ MX6QDL_PAD_DISP0_DAT16__IPU1_DISP0_DATA16 0x10
+ MX6QDL_PAD_DISP0_DAT17__IPU1_DISP0_DATA17 0x10
+ MX6QDL_PAD_DISP0_DAT18__IPU1_DISP0_DATA18 0x10
+ MX6QDL_PAD_DISP0_DAT19__IPU1_DISP0_DATA19 0x10
+ MX6QDL_PAD_DISP0_DAT20__IPU1_DISP0_DATA20 0x10
+ MX6QDL_PAD_DISP0_DAT21__IPU1_DISP0_DATA21 0x10
+ MX6QDL_PAD_DISP0_DAT22__IPU1_DISP0_DATA22 0x10
+ MX6QDL_PAD_DISP0_DAT23__IPU1_DISP0_DATA23 0x10
+ >;
+ };
+
pinctrl_pwm1: pwm1grp {
fsl,pins = <
MX6QDL_PAD_SD1_DAT3__PWM1_OUT 0x1b0b1
@@ -382,6 +448,10 @@
};
};
+&ipu1_di0_disp0 {
+ remote-endpoint = <&lcd_display_in>;
+};
+
&ldb {
status = "okay";
--
2.1.4
^ permalink raw reply related [flat|nested] 16+ messages in thread* [PATCH 2/2] ARM: dts: imx6qdl-sabrelite: add Okaya LCD display
2015-05-22 17:14 [PATCH 0/2] ARM: dts: add Okaya LCD display for Nitrogen and Sabrelite Gary Bisson
2015-05-22 17:14 ` [PATCH 1/2] ARM: dts: imx6qdl-nitrogen6x: add Okaya LCD display Gary Bisson
@ 2015-05-22 17:14 ` Gary Bisson
2015-05-27 3:06 ` [PATCH 0/2] ARM: dts: add Okaya LCD display for Nitrogen and Sabrelite Shawn Guo
` (3 subsequent siblings)
5 siblings, 0 replies; 16+ messages in thread
From: Gary Bisson @ 2015-05-22 17:14 UTC (permalink / raw)
To: linux-arm-kernel
This patch adds support for the 7" LCD display available for Sabrelite:
http://boundarydevices.com/product/7-800x480-display/
Signed-off-by: Gary Bisson <gary.bisson@boundarydevices.com>
---
arch/arm/boot/dts/imx6qdl-sabrelite.dtsi | 70 ++++++++++++++++++++++++++++++++
1 file changed, 70 insertions(+)
diff --git a/arch/arm/boot/dts/imx6qdl-sabrelite.dtsi b/arch/arm/boot/dts/imx6qdl-sabrelite.dtsi
index e00c44f..d5a25dc 100644
--- a/arch/arm/boot/dts/imx6qdl-sabrelite.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-sabrelite.dtsi
@@ -130,6 +130,39 @@
status = "okay";
};
+ lcd_display: display at di0 {
+ compatible = "fsl,imx-parallel-display";
+ interface-pix-fmt = "bgr666";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_j15>;
+ status = "okay";
+
+ port {
+ lcd_display_in: endpoint {
+ remote-endpoint = <&ipu1_di0_disp0>;
+ };
+ };
+
+ display-timings {
+ okaya_800x480 {
+ native-mode;
+ clock-frequency = <30000000>;
+ hactive = <800>;
+ vactive = <480>;
+ hback-porch = <40>;
+ hsync-len = <48>;
+ hfront-porch = <40>;
+ vback-porch = <29>;
+ vsync-len = <3>;
+ vfront-porch = <13>;
+ hsync-active = <0>;
+ vsync-active = <0>;
+ de-active = <1>;
+ pixelclk-active = <0>;
+ };
+ };
+ };
+
panel {
compatible = "hannstar,hsd100pxn1";
backlight = <&backlight_lvds>;
@@ -309,6 +342,39 @@
>;
};
+ pinctrl_j15: j15grp {
+ fsl,pins = <
+ MX6QDL_PAD_DI0_DISP_CLK__IPU1_DI0_DISP_CLK 0x10
+ MX6QDL_PAD_DI0_PIN15__IPU1_DI0_PIN15 0x10
+ MX6QDL_PAD_DI0_PIN2__IPU1_DI0_PIN02 0x10
+ MX6QDL_PAD_DI0_PIN3__IPU1_DI0_PIN03 0x10
+ MX6QDL_PAD_DISP0_DAT0__IPU1_DISP0_DATA00 0x10
+ MX6QDL_PAD_DISP0_DAT1__IPU1_DISP0_DATA01 0x10
+ MX6QDL_PAD_DISP0_DAT2__IPU1_DISP0_DATA02 0x10
+ MX6QDL_PAD_DISP0_DAT3__IPU1_DISP0_DATA03 0x10
+ MX6QDL_PAD_DISP0_DAT4__IPU1_DISP0_DATA04 0x10
+ MX6QDL_PAD_DISP0_DAT5__IPU1_DISP0_DATA05 0x10
+ MX6QDL_PAD_DISP0_DAT6__IPU1_DISP0_DATA06 0x10
+ MX6QDL_PAD_DISP0_DAT7__IPU1_DISP0_DATA07 0x10
+ MX6QDL_PAD_DISP0_DAT8__IPU1_DISP0_DATA08 0x10
+ MX6QDL_PAD_DISP0_DAT9__IPU1_DISP0_DATA09 0x10
+ MX6QDL_PAD_DISP0_DAT10__IPU1_DISP0_DATA10 0x10
+ MX6QDL_PAD_DISP0_DAT11__IPU1_DISP0_DATA11 0x10
+ MX6QDL_PAD_DISP0_DAT12__IPU1_DISP0_DATA12 0x10
+ MX6QDL_PAD_DISP0_DAT13__IPU1_DISP0_DATA13 0x10
+ MX6QDL_PAD_DISP0_DAT14__IPU1_DISP0_DATA14 0x10
+ MX6QDL_PAD_DISP0_DAT15__IPU1_DISP0_DATA15 0x10
+ MX6QDL_PAD_DISP0_DAT16__IPU1_DISP0_DATA16 0x10
+ MX6QDL_PAD_DISP0_DAT17__IPU1_DISP0_DATA17 0x10
+ MX6QDL_PAD_DISP0_DAT18__IPU1_DISP0_DATA18 0x10
+ MX6QDL_PAD_DISP0_DAT19__IPU1_DISP0_DATA19 0x10
+ MX6QDL_PAD_DISP0_DAT20__IPU1_DISP0_DATA20 0x10
+ MX6QDL_PAD_DISP0_DAT21__IPU1_DISP0_DATA21 0x10
+ MX6QDL_PAD_DISP0_DAT22__IPU1_DISP0_DATA22 0x10
+ MX6QDL_PAD_DISP0_DAT23__IPU1_DISP0_DATA23 0x10
+ >;
+ };
+
pinctrl_pwm1: pwm1grp {
fsl,pins = <
MX6QDL_PAD_SD1_DAT3__PWM1_OUT 0x1b0b1
@@ -377,6 +443,10 @@
};
};
+&ipu1_di0_disp0 {
+ remote-endpoint = <&lcd_display_in>;
+};
+
&ldb {
status = "okay";
--
2.1.4
^ permalink raw reply related [flat|nested] 16+ messages in thread* [PATCH 0/2] ARM: dts: add Okaya LCD display for Nitrogen and Sabrelite
2015-05-22 17:14 [PATCH 0/2] ARM: dts: add Okaya LCD display for Nitrogen and Sabrelite Gary Bisson
2015-05-22 17:14 ` [PATCH 1/2] ARM: dts: imx6qdl-nitrogen6x: add Okaya LCD display Gary Bisson
2015-05-22 17:14 ` [PATCH 2/2] ARM: dts: imx6qdl-sabrelite: " Gary Bisson
@ 2015-05-27 3:06 ` Shawn Guo
2015-05-27 7:38 ` Gary Bisson
2015-05-29 7:56 ` [PATCH v2 0/2] ARM: dts: add Okaya LCD panel " Gary Bisson
` (2 subsequent siblings)
5 siblings, 1 reply; 16+ messages in thread
From: Shawn Guo @ 2015-05-27 3:06 UTC (permalink / raw)
To: linux-arm-kernel
On Fri, May 22, 2015 at 07:14:25PM +0200, Gary Bisson wrote:
> This series adds the Okaya 7" LCD display that is a WVGA (800x480) panel with
> a 18-bit parallel interface for both Nitrogen and Sabrelite.
>
> A U-Boot script to configure the displays based on detection of the
> touch controller is available for reference here:
> https://github.com/boundarydevices/u-boot-imx6/blob/staging/board/boundary/nitrogen6x/6x_bootscript-mainline.txt
>
> Gary Bisson (2):
> ARM: dts: imx6qdl-nitrogen6x: add Okaya LCD display
> ARM: dts: imx6qdl-sabrelite: add Okaya LCD display
Philipp,
Are you okay with these two patches?
Shawn
^ permalink raw reply [flat|nested] 16+ messages in thread* [PATCH 0/2] ARM: dts: add Okaya LCD display for Nitrogen and Sabrelite
2015-05-27 3:06 ` [PATCH 0/2] ARM: dts: add Okaya LCD display for Nitrogen and Sabrelite Shawn Guo
@ 2015-05-27 7:38 ` Gary Bisson
2015-05-27 7:57 ` Philipp Zabel
0 siblings, 1 reply; 16+ messages in thread
From: Gary Bisson @ 2015-05-27 7:38 UTC (permalink / raw)
To: linux-arm-kernel
Philipp, Shawn, All,
On Wed, May 27, 2015 at 5:06 AM, Shawn Guo <shawn.guo@linaro.org> wrote:
> On Fri, May 22, 2015 at 07:14:25PM +0200, Gary Bisson wrote:
>> This series adds the Okaya 7" LCD display that is a WVGA (800x480) panel with
>> a 18-bit parallel interface for both Nitrogen and Sabrelite.
>>
>> A U-Boot script to configure the displays based on detection of the
>> touch controller is available for reference here:
>> https://github.com/boundarydevices/u-boot-imx6/blob/staging/board/boundary/nitrogen6x/6x_bootscript-mainline.txt
>>
>> Gary Bisson (2):
>> ARM: dts: imx6qdl-nitrogen6x: add Okaya LCD display
>> ARM: dts: imx6qdl-sabrelite: add Okaya LCD display
>
> Philipp,
>
> Are you okay with these two patches?
I've actually just ran into Philipp's patch on drm_panel support for
parallel-display driver.
https://patchwork.kernel.org/patch/6438311/
If the above patch is merged soon, maybe mine should be reworked to
use the panel as well (and add the Okaya timings to the simple panel
driver).
Let me know what would be the best.
Regards,
Gary
^ permalink raw reply [flat|nested] 16+ messages in thread
* [PATCH 0/2] ARM: dts: add Okaya LCD display for Nitrogen and Sabrelite
2015-05-27 7:38 ` Gary Bisson
@ 2015-05-27 7:57 ` Philipp Zabel
0 siblings, 0 replies; 16+ messages in thread
From: Philipp Zabel @ 2015-05-27 7:57 UTC (permalink / raw)
To: linux-arm-kernel
Hi Gary, Shawn,
Am Mittwoch, den 27.05.2015, 09:38 +0200 schrieb Gary Bisson:
> Philipp, Shawn, All,
>
> On Wed, May 27, 2015 at 5:06 AM, Shawn Guo <shawn.guo@linaro.org> wrote:
> > On Fri, May 22, 2015 at 07:14:25PM +0200, Gary Bisson wrote:
> >> This series adds the Okaya 7" LCD display that is a WVGA (800x480) panel with
> >> a 18-bit parallel interface for both Nitrogen and Sabrelite.
> >>
> >> A U-Boot script to configure the displays based on detection of the
> >> touch controller is available for reference here:
> >> https://github.com/boundarydevices/u-boot-imx6/blob/staging/board/boundary/nitrogen6x/6x_bootscript-mainline.txt
> >>
> >> Gary Bisson (2):
> >> ARM: dts: imx6qdl-nitrogen6x: add Okaya LCD display
> >> ARM: dts: imx6qdl-sabrelite: add Okaya LCD display
> >
> > Philipp,
> >
> > Are you okay with these two patches?
>
> I've actually just ran into Philipp's patch on drm_panel support for
> parallel-display driver.
> https://patchwork.kernel.org/patch/6438311/
>
> If the above patch is merged soon, maybe mine should be reworked to
> use the panel as well (and add the Okaya timings to the simple panel
> driver).
>
> Let me know what would be the best.
Yes, please add Okaya LCD support to the simple-panel driver instead.
I'll send a pull request with the panel patch.
regards
Philipp
^ permalink raw reply [flat|nested] 16+ messages in thread
* [PATCH v2 0/2] ARM: dts: add Okaya LCD panel for Nitrogen and Sabrelite
2015-05-22 17:14 [PATCH 0/2] ARM: dts: add Okaya LCD display for Nitrogen and Sabrelite Gary Bisson
` (2 preceding siblings ...)
2015-05-27 3:06 ` [PATCH 0/2] ARM: dts: add Okaya LCD display for Nitrogen and Sabrelite Shawn Guo
@ 2015-05-29 7:56 ` Gary Bisson
2015-05-29 7:56 ` [PATCH v2 1/2] ARM: dts: imx6qdl-nitrogen6x: add Okaya LCD panel Gary Bisson
2015-05-29 7:56 ` [PATCH v2 2/2] ARM: dts: imx6qdl-sabrelite: " Gary Bisson
2015-08-14 12:51 ` [PATCH v3 0/2] ARM: dts: add Okaya LCD display for Nitrogen and Sabrelite Gary Bisson
2015-09-30 13:05 ` [RESEND][PATCH v3 0/2] ARM: dts: add Okaya LCD display for Nitrogen and Sabrelite Gary Bisson
5 siblings, 2 replies; 16+ messages in thread
From: Gary Bisson @ 2015-05-29 7:56 UTC (permalink / raw)
To: linux-arm-kernel
This series adds the Okaya 7" LCD support as a simple panel for both Nitrogen
and Sabrelite.
It requires a patch from Philipp that adds panel support to the imx parallel
display driver.
https://patchwork.kernel.org/patch/6438311/
Also requires the patch that adds the Okaya display support to the simple
panel driver.
https://patchwork.kernel.org/patch/6503261/
A U-Boot script to configure the displays based on detection of the
touch controller is available for reference here:
https://github.com/boundarydevices/u-boot-imx6/blob/staging/board/boundary/nitrogen6x/6x_bootscript-mainline.txt
Gary Bisson (2):
ARM: dts: imx6qdl-nitrogen6x: add Okaya LCD panel
ARM: dts: imx6qdl-sabrelite: add Okaya LCD panel
arch/arm/boot/dts/imx6qdl-nitrogen6x.dtsi | 76 ++++++++++++++++++++++++++++++-
arch/arm/boot/dts/imx6qdl-sabrelite.dtsi | 76 ++++++++++++++++++++++++++++++-
2 files changed, 150 insertions(+), 2 deletions(-)
--
2.1.4
^ permalink raw reply [flat|nested] 16+ messages in thread* [PATCH v2 1/2] ARM: dts: imx6qdl-nitrogen6x: add Okaya LCD panel
2015-05-29 7:56 ` [PATCH v2 0/2] ARM: dts: add Okaya LCD panel " Gary Bisson
@ 2015-05-29 7:56 ` Gary Bisson
2015-05-29 7:56 ` [PATCH v2 2/2] ARM: dts: imx6qdl-sabrelite: " Gary Bisson
1 sibling, 0 replies; 16+ messages in thread
From: Gary Bisson @ 2015-05-29 7:56 UTC (permalink / raw)
To: linux-arm-kernel
This patch adds support for the 7" LCD display available for Nitrogen6x:
http://boundarydevices.com/product/7-800x480-display/
Also add label to backlight_lcd and connect it to the panel.
Signed-off-by: Gary Bisson <gary.bisson@boundarydevices.com>
---
arch/arm/boot/dts/imx6qdl-nitrogen6x.dtsi | 76 ++++++++++++++++++++++++++++++-
1 file changed, 75 insertions(+), 1 deletion(-)
diff --git a/arch/arm/boot/dts/imx6qdl-nitrogen6x.dtsi b/arch/arm/boot/dts/imx6qdl-nitrogen6x.dtsi
index 3af16df..622db9d 100644
--- a/arch/arm/boot/dts/imx6qdl-nitrogen6x.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-nitrogen6x.dtsi
@@ -113,7 +113,7 @@
mux-ext-port = <3>;
};
- backlight_lcd {
+ backlight_lcd: backlight_lcd {
compatible = "pwm-backlight";
pwms = <&pwm1 0 5000000>;
brightness-levels = <0 4 8 16 32 64 128 255>;
@@ -131,6 +131,43 @@
status = "okay";
};
+ lcd_display: display at di0 {
+ compatible = "fsl,imx-parallel-display";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ interface-pix-fmt = "bgr666";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_j15>;
+ status = "okay";
+
+ port at 0 {
+ reg = <0>;
+
+ lcd_display_in: endpoint {
+ remote-endpoint = <&ipu1_di0_disp0>;
+ };
+ };
+
+ port at 1 {
+ reg = <1>;
+
+ lcd_display_out: endpoint {
+ remote-endpoint = <&lcd_panel_in>;
+ };
+ };
+ };
+
+ lcd_panel {
+ compatible = "okaya,rs800480t_7x0gp";
+ backlight = <&backlight_lcd>;
+
+ port {
+ lcd_panel_in: endpoint {
+ remote-endpoint = <&lcd_display_out>;
+ };
+ };
+ };
+
panel {
compatible = "hannstar,hsd100pxn1";
backlight = <&backlight_lvds>;
@@ -315,6 +352,39 @@
>;
};
+ pinctrl_j15: j15grp {
+ fsl,pins = <
+ MX6QDL_PAD_DI0_DISP_CLK__IPU1_DI0_DISP_CLK 0x10
+ MX6QDL_PAD_DI0_PIN15__IPU1_DI0_PIN15 0x10
+ MX6QDL_PAD_DI0_PIN2__IPU1_DI0_PIN02 0x10
+ MX6QDL_PAD_DI0_PIN3__IPU1_DI0_PIN03 0x10
+ MX6QDL_PAD_DISP0_DAT0__IPU1_DISP0_DATA00 0x10
+ MX6QDL_PAD_DISP0_DAT1__IPU1_DISP0_DATA01 0x10
+ MX6QDL_PAD_DISP0_DAT2__IPU1_DISP0_DATA02 0x10
+ MX6QDL_PAD_DISP0_DAT3__IPU1_DISP0_DATA03 0x10
+ MX6QDL_PAD_DISP0_DAT4__IPU1_DISP0_DATA04 0x10
+ MX6QDL_PAD_DISP0_DAT5__IPU1_DISP0_DATA05 0x10
+ MX6QDL_PAD_DISP0_DAT6__IPU1_DISP0_DATA06 0x10
+ MX6QDL_PAD_DISP0_DAT7__IPU1_DISP0_DATA07 0x10
+ MX6QDL_PAD_DISP0_DAT8__IPU1_DISP0_DATA08 0x10
+ MX6QDL_PAD_DISP0_DAT9__IPU1_DISP0_DATA09 0x10
+ MX6QDL_PAD_DISP0_DAT10__IPU1_DISP0_DATA10 0x10
+ MX6QDL_PAD_DISP0_DAT11__IPU1_DISP0_DATA11 0x10
+ MX6QDL_PAD_DISP0_DAT12__IPU1_DISP0_DATA12 0x10
+ MX6QDL_PAD_DISP0_DAT13__IPU1_DISP0_DATA13 0x10
+ MX6QDL_PAD_DISP0_DAT14__IPU1_DISP0_DATA14 0x10
+ MX6QDL_PAD_DISP0_DAT15__IPU1_DISP0_DATA15 0x10
+ MX6QDL_PAD_DISP0_DAT16__IPU1_DISP0_DATA16 0x10
+ MX6QDL_PAD_DISP0_DAT17__IPU1_DISP0_DATA17 0x10
+ MX6QDL_PAD_DISP0_DAT18__IPU1_DISP0_DATA18 0x10
+ MX6QDL_PAD_DISP0_DAT19__IPU1_DISP0_DATA19 0x10
+ MX6QDL_PAD_DISP0_DAT20__IPU1_DISP0_DATA20 0x10
+ MX6QDL_PAD_DISP0_DAT21__IPU1_DISP0_DATA21 0x10
+ MX6QDL_PAD_DISP0_DAT22__IPU1_DISP0_DATA22 0x10
+ MX6QDL_PAD_DISP0_DAT23__IPU1_DISP0_DATA23 0x10
+ >;
+ };
+
pinctrl_pwm1: pwm1grp {
fsl,pins = <
MX6QDL_PAD_SD1_DAT3__PWM1_OUT 0x1b0b1
@@ -382,6 +452,10 @@
};
};
+&ipu1_di0_disp0 {
+ remote-endpoint = <&lcd_display_in>;
+};
+
&ldb {
status = "okay";
--
2.1.4
^ permalink raw reply related [flat|nested] 16+ messages in thread* [PATCH v2 2/2] ARM: dts: imx6qdl-sabrelite: add Okaya LCD panel
2015-05-29 7:56 ` [PATCH v2 0/2] ARM: dts: add Okaya LCD panel " Gary Bisson
2015-05-29 7:56 ` [PATCH v2 1/2] ARM: dts: imx6qdl-nitrogen6x: add Okaya LCD panel Gary Bisson
@ 2015-05-29 7:56 ` Gary Bisson
1 sibling, 0 replies; 16+ messages in thread
From: Gary Bisson @ 2015-05-29 7:56 UTC (permalink / raw)
To: linux-arm-kernel
This patch adds support for the 7" LCD display available for Sabrelite:
http://boundarydevices.com/product/7-800x480-display/
Also add label to backlight_lcd and connect it to the panel.
Signed-off-by: Gary Bisson <gary.bisson@boundarydevices.com>
---
arch/arm/boot/dts/imx6qdl-sabrelite.dtsi | 76 +++++++++++++++++++++++++++++++-
1 file changed, 75 insertions(+), 1 deletion(-)
diff --git a/arch/arm/boot/dts/imx6qdl-sabrelite.dtsi b/arch/arm/boot/dts/imx6qdl-sabrelite.dtsi
index e00c44f..87fd404 100644
--- a/arch/arm/boot/dts/imx6qdl-sabrelite.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-sabrelite.dtsi
@@ -112,7 +112,7 @@
mux-ext-port = <4>;
};
- backlight_lcd {
+ backlight_lcd: backlight_lcd {
compatible = "pwm-backlight";
pwms = <&pwm1 0 5000000>;
brightness-levels = <0 4 8 16 32 64 128 255>;
@@ -130,6 +130,43 @@
status = "okay";
};
+ lcd_display: display at di0 {
+ compatible = "fsl,imx-parallel-display";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ interface-pix-fmt = "bgr666";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_j15>;
+ status = "okay";
+
+ port at 0 {
+ reg = <0>;
+
+ lcd_display_in: endpoint {
+ remote-endpoint = <&ipu1_di0_disp0>;
+ };
+ };
+
+ port at 1 {
+ reg = <1>;
+
+ lcd_display_out: endpoint {
+ remote-endpoint = <&lcd_panel_in>;
+ };
+ };
+ };
+
+ lcd_panel {
+ compatible = "okaya,rs800480t_7x0gp";
+ backlight = <&backlight_lcd>;
+
+ port {
+ lcd_panel_in: endpoint {
+ remote-endpoint = <&lcd_display_out>;
+ };
+ };
+ };
+
panel {
compatible = "hannstar,hsd100pxn1";
backlight = <&backlight_lvds>;
@@ -309,6 +346,39 @@
>;
};
+ pinctrl_j15: j15grp {
+ fsl,pins = <
+ MX6QDL_PAD_DI0_DISP_CLK__IPU1_DI0_DISP_CLK 0x10
+ MX6QDL_PAD_DI0_PIN15__IPU1_DI0_PIN15 0x10
+ MX6QDL_PAD_DI0_PIN2__IPU1_DI0_PIN02 0x10
+ MX6QDL_PAD_DI0_PIN3__IPU1_DI0_PIN03 0x10
+ MX6QDL_PAD_DISP0_DAT0__IPU1_DISP0_DATA00 0x10
+ MX6QDL_PAD_DISP0_DAT1__IPU1_DISP0_DATA01 0x10
+ MX6QDL_PAD_DISP0_DAT2__IPU1_DISP0_DATA02 0x10
+ MX6QDL_PAD_DISP0_DAT3__IPU1_DISP0_DATA03 0x10
+ MX6QDL_PAD_DISP0_DAT4__IPU1_DISP0_DATA04 0x10
+ MX6QDL_PAD_DISP0_DAT5__IPU1_DISP0_DATA05 0x10
+ MX6QDL_PAD_DISP0_DAT6__IPU1_DISP0_DATA06 0x10
+ MX6QDL_PAD_DISP0_DAT7__IPU1_DISP0_DATA07 0x10
+ MX6QDL_PAD_DISP0_DAT8__IPU1_DISP0_DATA08 0x10
+ MX6QDL_PAD_DISP0_DAT9__IPU1_DISP0_DATA09 0x10
+ MX6QDL_PAD_DISP0_DAT10__IPU1_DISP0_DATA10 0x10
+ MX6QDL_PAD_DISP0_DAT11__IPU1_DISP0_DATA11 0x10
+ MX6QDL_PAD_DISP0_DAT12__IPU1_DISP0_DATA12 0x10
+ MX6QDL_PAD_DISP0_DAT13__IPU1_DISP0_DATA13 0x10
+ MX6QDL_PAD_DISP0_DAT14__IPU1_DISP0_DATA14 0x10
+ MX6QDL_PAD_DISP0_DAT15__IPU1_DISP0_DATA15 0x10
+ MX6QDL_PAD_DISP0_DAT16__IPU1_DISP0_DATA16 0x10
+ MX6QDL_PAD_DISP0_DAT17__IPU1_DISP0_DATA17 0x10
+ MX6QDL_PAD_DISP0_DAT18__IPU1_DISP0_DATA18 0x10
+ MX6QDL_PAD_DISP0_DAT19__IPU1_DISP0_DATA19 0x10
+ MX6QDL_PAD_DISP0_DAT20__IPU1_DISP0_DATA20 0x10
+ MX6QDL_PAD_DISP0_DAT21__IPU1_DISP0_DATA21 0x10
+ MX6QDL_PAD_DISP0_DAT22__IPU1_DISP0_DATA22 0x10
+ MX6QDL_PAD_DISP0_DAT23__IPU1_DISP0_DATA23 0x10
+ >;
+ };
+
pinctrl_pwm1: pwm1grp {
fsl,pins = <
MX6QDL_PAD_SD1_DAT3__PWM1_OUT 0x1b0b1
@@ -377,6 +447,10 @@
};
};
+&ipu1_di0_disp0 {
+ remote-endpoint = <&lcd_display_in>;
+};
+
&ldb {
status = "okay";
--
2.1.4
^ permalink raw reply related [flat|nested] 16+ messages in thread
* [PATCH v3 0/2] ARM: dts: add Okaya LCD display for Nitrogen and Sabrelite
2015-05-22 17:14 [PATCH 0/2] ARM: dts: add Okaya LCD display for Nitrogen and Sabrelite Gary Bisson
` (3 preceding siblings ...)
2015-05-29 7:56 ` [PATCH v2 0/2] ARM: dts: add Okaya LCD panel " Gary Bisson
@ 2015-08-14 12:51 ` Gary Bisson
2015-08-14 12:51 ` [PATCH v3 1/2] ARM: dts: imx6qdl-nitrogen6x: add Okaya LCD panel Gary Bisson
2015-08-14 12:51 ` [PATCH v3 2/2] ARM: dts: imx6qdl-sabrelite: " Gary Bisson
2015-09-30 13:05 ` [RESEND][PATCH v3 0/2] ARM: dts: add Okaya LCD display for Nitrogen and Sabrelite Gary Bisson
5 siblings, 2 replies; 16+ messages in thread
From: Gary Bisson @ 2015-08-14 12:51 UTC (permalink / raw)
To: linux-arm-kernel
This series adds the Okaya 7" LCD support as a simple panel for both Nitrogen
and Sabrelite.
This v3 updates the series as the compatible name has been changed from
"okaya,rs800480t_7x0gp" to "okaya,rs800480t-7x0gp" when the drm patch has been
merged into linux-next branch.
http://git.kernel.org/cgit/linux/kernel/git/next/linux-next.git/commit/?id=ec9000c
Also note that Philipp Zabel's patch that enables the parallel-display driver
to work with a simple panel has been merged.
http://git.kernel.org/cgit/linux/kernel/git/stable/linux-stable.git/commit/?id=553a59f
A U-Boot script to configure the displays based on detection of the
touch controller is available for reference here:
https://github.com/boundarydevices/u-boot-imx6/blob/staging/board/boundary/nitrogen6x/6x_bootscript-mainline.txt
Gary Bisson (2):
ARM: dts: imx6qdl-nitrogen6x: add Okaya LCD panel
ARM: dts: imx6qdl-sabrelite: add Okaya LCD panel
arch/arm/boot/dts/imx6qdl-nitrogen6x.dtsi | 76 ++++++++++++++++++++++++++++++-
arch/arm/boot/dts/imx6qdl-sabrelite.dtsi | 76 ++++++++++++++++++++++++++++++-
2 files changed, 150 insertions(+), 2 deletions(-)
--
2.4.6
^ permalink raw reply [flat|nested] 16+ messages in thread* [PATCH v3 1/2] ARM: dts: imx6qdl-nitrogen6x: add Okaya LCD panel
2015-08-14 12:51 ` [PATCH v3 0/2] ARM: dts: add Okaya LCD display for Nitrogen and Sabrelite Gary Bisson
@ 2015-08-14 12:51 ` Gary Bisson
2015-08-14 12:51 ` [PATCH v3 2/2] ARM: dts: imx6qdl-sabrelite: " Gary Bisson
1 sibling, 0 replies; 16+ messages in thread
From: Gary Bisson @ 2015-08-14 12:51 UTC (permalink / raw)
To: linux-arm-kernel
This patch adds support for the 7" LCD display available for Nitrogen6x:
http://boundarydevices.com/product/7-800x480-display/
Also add label to backlight_lcd and connect it to the panel.
Signed-off-by: Gary Bisson <gary.bisson@boundarydevices.com>
---
arch/arm/boot/dts/imx6qdl-nitrogen6x.dtsi | 76 ++++++++++++++++++++++++++++++-
1 file changed, 75 insertions(+), 1 deletion(-)
diff --git a/arch/arm/boot/dts/imx6qdl-nitrogen6x.dtsi b/arch/arm/boot/dts/imx6qdl-nitrogen6x.dtsi
index 340bc8e..ad16dce 100644
--- a/arch/arm/boot/dts/imx6qdl-nitrogen6x.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-nitrogen6x.dtsi
@@ -124,7 +124,7 @@
mux-ext-port = <3>;
};
- backlight_lcd {
+ backlight_lcd: backlight_lcd {
compatible = "pwm-backlight";
pwms = <&pwm1 0 5000000>;
brightness-levels = <0 4 8 16 32 64 128 255>;
@@ -142,6 +142,43 @@
status = "okay";
};
+ lcd_display: display at di0 {
+ compatible = "fsl,imx-parallel-display";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ interface-pix-fmt = "bgr666";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_j15>;
+ status = "okay";
+
+ port at 0 {
+ reg = <0>;
+
+ lcd_display_in: endpoint {
+ remote-endpoint = <&ipu1_di0_disp0>;
+ };
+ };
+
+ port at 1 {
+ reg = <1>;
+
+ lcd_display_out: endpoint {
+ remote-endpoint = <&lcd_panel_in>;
+ };
+ };
+ };
+
+ lcd_panel {
+ compatible = "okaya,rs800480t-7x0gp";
+ backlight = <&backlight_lcd>;
+
+ port {
+ lcd_panel_in: endpoint {
+ remote-endpoint = <&lcd_display_out>;
+ };
+ };
+ };
+
panel {
compatible = "hannstar,hsd100pxn1";
backlight = <&backlight_lvds>;
@@ -354,6 +391,39 @@
>;
};
+ pinctrl_j15: j15grp {
+ fsl,pins = <
+ MX6QDL_PAD_DI0_DISP_CLK__IPU1_DI0_DISP_CLK 0x10
+ MX6QDL_PAD_DI0_PIN15__IPU1_DI0_PIN15 0x10
+ MX6QDL_PAD_DI0_PIN2__IPU1_DI0_PIN02 0x10
+ MX6QDL_PAD_DI0_PIN3__IPU1_DI0_PIN03 0x10
+ MX6QDL_PAD_DISP0_DAT0__IPU1_DISP0_DATA00 0x10
+ MX6QDL_PAD_DISP0_DAT1__IPU1_DISP0_DATA01 0x10
+ MX6QDL_PAD_DISP0_DAT2__IPU1_DISP0_DATA02 0x10
+ MX6QDL_PAD_DISP0_DAT3__IPU1_DISP0_DATA03 0x10
+ MX6QDL_PAD_DISP0_DAT4__IPU1_DISP0_DATA04 0x10
+ MX6QDL_PAD_DISP0_DAT5__IPU1_DISP0_DATA05 0x10
+ MX6QDL_PAD_DISP0_DAT6__IPU1_DISP0_DATA06 0x10
+ MX6QDL_PAD_DISP0_DAT7__IPU1_DISP0_DATA07 0x10
+ MX6QDL_PAD_DISP0_DAT8__IPU1_DISP0_DATA08 0x10
+ MX6QDL_PAD_DISP0_DAT9__IPU1_DISP0_DATA09 0x10
+ MX6QDL_PAD_DISP0_DAT10__IPU1_DISP0_DATA10 0x10
+ MX6QDL_PAD_DISP0_DAT11__IPU1_DISP0_DATA11 0x10
+ MX6QDL_PAD_DISP0_DAT12__IPU1_DISP0_DATA12 0x10
+ MX6QDL_PAD_DISP0_DAT13__IPU1_DISP0_DATA13 0x10
+ MX6QDL_PAD_DISP0_DAT14__IPU1_DISP0_DATA14 0x10
+ MX6QDL_PAD_DISP0_DAT15__IPU1_DISP0_DATA15 0x10
+ MX6QDL_PAD_DISP0_DAT16__IPU1_DISP0_DATA16 0x10
+ MX6QDL_PAD_DISP0_DAT17__IPU1_DISP0_DATA17 0x10
+ MX6QDL_PAD_DISP0_DAT18__IPU1_DISP0_DATA18 0x10
+ MX6QDL_PAD_DISP0_DAT19__IPU1_DISP0_DATA19 0x10
+ MX6QDL_PAD_DISP0_DAT20__IPU1_DISP0_DATA20 0x10
+ MX6QDL_PAD_DISP0_DAT21__IPU1_DISP0_DATA21 0x10
+ MX6QDL_PAD_DISP0_DAT22__IPU1_DISP0_DATA22 0x10
+ MX6QDL_PAD_DISP0_DAT23__IPU1_DISP0_DATA23 0x10
+ >;
+ };
+
pinctrl_pwm1: pwm1grp {
fsl,pins = <
MX6QDL_PAD_SD1_DAT3__PWM1_OUT 0x1b0b1
@@ -421,6 +491,10 @@
};
};
+&ipu1_di0_disp0 {
+ remote-endpoint = <&lcd_display_in>;
+};
+
&ldb {
status = "okay";
--
2.4.6
^ permalink raw reply related [flat|nested] 16+ messages in thread* [PATCH v3 2/2] ARM: dts: imx6qdl-sabrelite: add Okaya LCD panel
2015-08-14 12:51 ` [PATCH v3 0/2] ARM: dts: add Okaya LCD display for Nitrogen and Sabrelite Gary Bisson
2015-08-14 12:51 ` [PATCH v3 1/2] ARM: dts: imx6qdl-nitrogen6x: add Okaya LCD panel Gary Bisson
@ 2015-08-14 12:51 ` Gary Bisson
1 sibling, 0 replies; 16+ messages in thread
From: Gary Bisson @ 2015-08-14 12:51 UTC (permalink / raw)
To: linux-arm-kernel
This patch adds support for the 7" LCD display available for Sabrelite:
http://boundarydevices.com/product/7-800x480-display/
Also add label to backlight_lcd and connect it to the panel.
Signed-off-by: Gary Bisson <gary.bisson@boundarydevices.com>
---
arch/arm/boot/dts/imx6qdl-sabrelite.dtsi | 76 +++++++++++++++++++++++++++++++-
1 file changed, 75 insertions(+), 1 deletion(-)
diff --git a/arch/arm/boot/dts/imx6qdl-sabrelite.dtsi b/arch/arm/boot/dts/imx6qdl-sabrelite.dtsi
index ce4c731..6adbcdd 100644
--- a/arch/arm/boot/dts/imx6qdl-sabrelite.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-sabrelite.dtsi
@@ -123,7 +123,7 @@
mux-ext-port = <4>;
};
- backlight_lcd {
+ backlight_lcd: backlight_lcd {
compatible = "pwm-backlight";
pwms = <&pwm1 0 5000000>;
brightness-levels = <0 4 8 16 32 64 128 255>;
@@ -141,6 +141,43 @@
status = "okay";
};
+ lcd_display: display at di0 {
+ compatible = "fsl,imx-parallel-display";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ interface-pix-fmt = "bgr666";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_j15>;
+ status = "okay";
+
+ port at 0 {
+ reg = <0>;
+
+ lcd_display_in: endpoint {
+ remote-endpoint = <&ipu1_di0_disp0>;
+ };
+ };
+
+ port at 1 {
+ reg = <1>;
+
+ lcd_display_out: endpoint {
+ remote-endpoint = <&lcd_panel_in>;
+ };
+ };
+ };
+
+ lcd_panel {
+ compatible = "okaya,rs800480t-7x0gp";
+ backlight = <&backlight_lcd>;
+
+ port {
+ lcd_panel_in: endpoint {
+ remote-endpoint = <&lcd_display_out>;
+ };
+ };
+ };
+
panel {
compatible = "hannstar,hsd100pxn1";
backlight = <&backlight_lvds>;
@@ -348,6 +385,39 @@
>;
};
+ pinctrl_j15: j15grp {
+ fsl,pins = <
+ MX6QDL_PAD_DI0_DISP_CLK__IPU1_DI0_DISP_CLK 0x10
+ MX6QDL_PAD_DI0_PIN15__IPU1_DI0_PIN15 0x10
+ MX6QDL_PAD_DI0_PIN2__IPU1_DI0_PIN02 0x10
+ MX6QDL_PAD_DI0_PIN3__IPU1_DI0_PIN03 0x10
+ MX6QDL_PAD_DISP0_DAT0__IPU1_DISP0_DATA00 0x10
+ MX6QDL_PAD_DISP0_DAT1__IPU1_DISP0_DATA01 0x10
+ MX6QDL_PAD_DISP0_DAT2__IPU1_DISP0_DATA02 0x10
+ MX6QDL_PAD_DISP0_DAT3__IPU1_DISP0_DATA03 0x10
+ MX6QDL_PAD_DISP0_DAT4__IPU1_DISP0_DATA04 0x10
+ MX6QDL_PAD_DISP0_DAT5__IPU1_DISP0_DATA05 0x10
+ MX6QDL_PAD_DISP0_DAT6__IPU1_DISP0_DATA06 0x10
+ MX6QDL_PAD_DISP0_DAT7__IPU1_DISP0_DATA07 0x10
+ MX6QDL_PAD_DISP0_DAT8__IPU1_DISP0_DATA08 0x10
+ MX6QDL_PAD_DISP0_DAT9__IPU1_DISP0_DATA09 0x10
+ MX6QDL_PAD_DISP0_DAT10__IPU1_DISP0_DATA10 0x10
+ MX6QDL_PAD_DISP0_DAT11__IPU1_DISP0_DATA11 0x10
+ MX6QDL_PAD_DISP0_DAT12__IPU1_DISP0_DATA12 0x10
+ MX6QDL_PAD_DISP0_DAT13__IPU1_DISP0_DATA13 0x10
+ MX6QDL_PAD_DISP0_DAT14__IPU1_DISP0_DATA14 0x10
+ MX6QDL_PAD_DISP0_DAT15__IPU1_DISP0_DATA15 0x10
+ MX6QDL_PAD_DISP0_DAT16__IPU1_DISP0_DATA16 0x10
+ MX6QDL_PAD_DISP0_DAT17__IPU1_DISP0_DATA17 0x10
+ MX6QDL_PAD_DISP0_DAT18__IPU1_DISP0_DATA18 0x10
+ MX6QDL_PAD_DISP0_DAT19__IPU1_DISP0_DATA19 0x10
+ MX6QDL_PAD_DISP0_DAT20__IPU1_DISP0_DATA20 0x10
+ MX6QDL_PAD_DISP0_DAT21__IPU1_DISP0_DATA21 0x10
+ MX6QDL_PAD_DISP0_DAT22__IPU1_DISP0_DATA22 0x10
+ MX6QDL_PAD_DISP0_DAT23__IPU1_DISP0_DATA23 0x10
+ >;
+ };
+
pinctrl_pwm1: pwm1grp {
fsl,pins = <
MX6QDL_PAD_SD1_DAT3__PWM1_OUT 0x1b0b1
@@ -416,6 +486,10 @@
};
};
+&ipu1_di0_disp0 {
+ remote-endpoint = <&lcd_display_in>;
+};
+
&ldb {
status = "okay";
--
2.4.6
^ permalink raw reply related [flat|nested] 16+ messages in thread
* [RESEND][PATCH v3 0/2] ARM: dts: add Okaya LCD display for Nitrogen and Sabrelite
2015-05-22 17:14 [PATCH 0/2] ARM: dts: add Okaya LCD display for Nitrogen and Sabrelite Gary Bisson
` (4 preceding siblings ...)
2015-08-14 12:51 ` [PATCH v3 0/2] ARM: dts: add Okaya LCD display for Nitrogen and Sabrelite Gary Bisson
@ 2015-09-30 13:05 ` Gary Bisson
2015-09-30 13:05 ` [RESEND][PATCH v3 1/2] ARM: dts: imx6qdl-nitrogen6x: add Okaya LCD panel Gary Bisson
` (2 more replies)
5 siblings, 3 replies; 16+ messages in thread
From: Gary Bisson @ 2015-09-30 13:05 UTC (permalink / raw)
To: linux-arm-kernel
This is just a resend of my v3 with Shawn's correct e-mail address. I've also
made sure it applies (and builds) on latest linux-next 20150930.
This series adds the Okaya 7" LCD support as a simple panel for both Nitrogen
and Sabrelite.
This v3 updates the series as the compatible name has been changed from
"okaya,rs800480t_7x0gp" to "okaya,rs800480t-7x0gp" when the drm patch has been
merged into linux-next branch.
http://git.kernel.org/cgit/linux/kernel/git/next/linux-next.git/commit/?id=ec9000c
Also note that Philipp Zabel's patch that enables the parallel-display driver
to work with a simple panel has been merged.
http://git.kernel.org/cgit/linux/kernel/git/stable/linux-stable.git/commit/?id=553a59f
A U-Boot script to configure the displays based on detection of the
touch controller is available for reference here:
https://github.com/boundarydevices/u-boot-imx6/blob/staging/board/boundary/nitrogen6x/6x_bootscript-mainline.txt
Gary Bisson (2):
ARM: dts: imx6qdl-nitrogen6x: add Okaya LCD panel
ARM: dts: imx6qdl-sabrelite: add Okaya LCD panel
arch/arm/boot/dts/imx6qdl-nitrogen6x.dtsi | 76 ++++++++++++++++++++++++++++++-
arch/arm/boot/dts/imx6qdl-sabrelite.dtsi | 76 ++++++++++++++++++++++++++++++-
2 files changed, 150 insertions(+), 2 deletions(-)
--
2.5.3
^ permalink raw reply [flat|nested] 16+ messages in thread* [RESEND][PATCH v3 1/2] ARM: dts: imx6qdl-nitrogen6x: add Okaya LCD panel
2015-09-30 13:05 ` [RESEND][PATCH v3 0/2] ARM: dts: add Okaya LCD display for Nitrogen and Sabrelite Gary Bisson
@ 2015-09-30 13:05 ` Gary Bisson
2015-09-30 13:05 ` [RESEND][PATCH v3 2/2] ARM: dts: imx6qdl-sabrelite: " Gary Bisson
2015-10-08 7:55 ` [RESEND][PATCH v3 0/2] ARM: dts: add Okaya LCD display for Nitrogen and Sabrelite Shawn Guo
2 siblings, 0 replies; 16+ messages in thread
From: Gary Bisson @ 2015-09-30 13:05 UTC (permalink / raw)
To: linux-arm-kernel
This patch adds support for the 7" LCD display available for Nitrogen6x:
http://boundarydevices.com/product/7-800x480-display/
Also add label to backlight_lcd and connect it to the panel.
Signed-off-by: Gary Bisson <gary.bisson@boundarydevices.com>
---
arch/arm/boot/dts/imx6qdl-nitrogen6x.dtsi | 76 ++++++++++++++++++++++++++++++-
1 file changed, 75 insertions(+), 1 deletion(-)
diff --git a/arch/arm/boot/dts/imx6qdl-nitrogen6x.dtsi b/arch/arm/boot/dts/imx6qdl-nitrogen6x.dtsi
index 04278ba..7212f90 100644
--- a/arch/arm/boot/dts/imx6qdl-nitrogen6x.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-nitrogen6x.dtsi
@@ -124,7 +124,7 @@
mux-ext-port = <3>;
};
- backlight_lcd {
+ backlight_lcd: backlight_lcd {
compatible = "pwm-backlight";
pwms = <&pwm1 0 5000000>;
brightness-levels = <0 4 8 16 32 64 128 255>;
@@ -142,6 +142,43 @@
status = "okay";
};
+ lcd_display: display at di0 {
+ compatible = "fsl,imx-parallel-display";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ interface-pix-fmt = "bgr666";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_j15>;
+ status = "okay";
+
+ port at 0 {
+ reg = <0>;
+
+ lcd_display_in: endpoint {
+ remote-endpoint = <&ipu1_di0_disp0>;
+ };
+ };
+
+ port at 1 {
+ reg = <1>;
+
+ lcd_display_out: endpoint {
+ remote-endpoint = <&lcd_panel_in>;
+ };
+ };
+ };
+
+ lcd_panel {
+ compatible = "okaya,rs800480t-7x0gp";
+ backlight = <&backlight_lcd>;
+
+ port {
+ lcd_panel_in: endpoint {
+ remote-endpoint = <&lcd_display_out>;
+ };
+ };
+ };
+
panel {
compatible = "hannstar,hsd100pxn1";
backlight = <&backlight_lvds>;
@@ -354,6 +391,39 @@
>;
};
+ pinctrl_j15: j15grp {
+ fsl,pins = <
+ MX6QDL_PAD_DI0_DISP_CLK__IPU1_DI0_DISP_CLK 0x10
+ MX6QDL_PAD_DI0_PIN15__IPU1_DI0_PIN15 0x10
+ MX6QDL_PAD_DI0_PIN2__IPU1_DI0_PIN02 0x10
+ MX6QDL_PAD_DI0_PIN3__IPU1_DI0_PIN03 0x10
+ MX6QDL_PAD_DISP0_DAT0__IPU1_DISP0_DATA00 0x10
+ MX6QDL_PAD_DISP0_DAT1__IPU1_DISP0_DATA01 0x10
+ MX6QDL_PAD_DISP0_DAT2__IPU1_DISP0_DATA02 0x10
+ MX6QDL_PAD_DISP0_DAT3__IPU1_DISP0_DATA03 0x10
+ MX6QDL_PAD_DISP0_DAT4__IPU1_DISP0_DATA04 0x10
+ MX6QDL_PAD_DISP0_DAT5__IPU1_DISP0_DATA05 0x10
+ MX6QDL_PAD_DISP0_DAT6__IPU1_DISP0_DATA06 0x10
+ MX6QDL_PAD_DISP0_DAT7__IPU1_DISP0_DATA07 0x10
+ MX6QDL_PAD_DISP0_DAT8__IPU1_DISP0_DATA08 0x10
+ MX6QDL_PAD_DISP0_DAT9__IPU1_DISP0_DATA09 0x10
+ MX6QDL_PAD_DISP0_DAT10__IPU1_DISP0_DATA10 0x10
+ MX6QDL_PAD_DISP0_DAT11__IPU1_DISP0_DATA11 0x10
+ MX6QDL_PAD_DISP0_DAT12__IPU1_DISP0_DATA12 0x10
+ MX6QDL_PAD_DISP0_DAT13__IPU1_DISP0_DATA13 0x10
+ MX6QDL_PAD_DISP0_DAT14__IPU1_DISP0_DATA14 0x10
+ MX6QDL_PAD_DISP0_DAT15__IPU1_DISP0_DATA15 0x10
+ MX6QDL_PAD_DISP0_DAT16__IPU1_DISP0_DATA16 0x10
+ MX6QDL_PAD_DISP0_DAT17__IPU1_DISP0_DATA17 0x10
+ MX6QDL_PAD_DISP0_DAT18__IPU1_DISP0_DATA18 0x10
+ MX6QDL_PAD_DISP0_DAT19__IPU1_DISP0_DATA19 0x10
+ MX6QDL_PAD_DISP0_DAT20__IPU1_DISP0_DATA20 0x10
+ MX6QDL_PAD_DISP0_DAT21__IPU1_DISP0_DATA21 0x10
+ MX6QDL_PAD_DISP0_DAT22__IPU1_DISP0_DATA22 0x10
+ MX6QDL_PAD_DISP0_DAT23__IPU1_DISP0_DATA23 0x10
+ >;
+ };
+
pinctrl_pwm1: pwm1grp {
fsl,pins = <
MX6QDL_PAD_SD1_DAT3__PWM1_OUT 0x1b0b1
@@ -421,6 +491,10 @@
};
};
+&ipu1_di0_disp0 {
+ remote-endpoint = <&lcd_display_in>;
+};
+
&ldb {
status = "okay";
--
2.5.3
^ permalink raw reply related [flat|nested] 16+ messages in thread* [RESEND][PATCH v3 2/2] ARM: dts: imx6qdl-sabrelite: add Okaya LCD panel
2015-09-30 13:05 ` [RESEND][PATCH v3 0/2] ARM: dts: add Okaya LCD display for Nitrogen and Sabrelite Gary Bisson
2015-09-30 13:05 ` [RESEND][PATCH v3 1/2] ARM: dts: imx6qdl-nitrogen6x: add Okaya LCD panel Gary Bisson
@ 2015-09-30 13:05 ` Gary Bisson
2015-10-08 7:55 ` [RESEND][PATCH v3 0/2] ARM: dts: add Okaya LCD display for Nitrogen and Sabrelite Shawn Guo
2 siblings, 0 replies; 16+ messages in thread
From: Gary Bisson @ 2015-09-30 13:05 UTC (permalink / raw)
To: linux-arm-kernel
This patch adds support for the 7" LCD display available for Sabrelite:
http://boundarydevices.com/product/7-800x480-display/
Also add label to backlight_lcd and connect it to the panel.
Signed-off-by: Gary Bisson <gary.bisson@boundarydevices.com>
---
arch/arm/boot/dts/imx6qdl-sabrelite.dtsi | 76 +++++++++++++++++++++++++++++++-
1 file changed, 75 insertions(+), 1 deletion(-)
diff --git a/arch/arm/boot/dts/imx6qdl-sabrelite.dtsi b/arch/arm/boot/dts/imx6qdl-sabrelite.dtsi
index 2f85106..65cdeb3 100644
--- a/arch/arm/boot/dts/imx6qdl-sabrelite.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-sabrelite.dtsi
@@ -123,7 +123,7 @@
mux-ext-port = <4>;
};
- backlight_lcd {
+ backlight_lcd: backlight_lcd {
compatible = "pwm-backlight";
pwms = <&pwm1 0 5000000>;
brightness-levels = <0 4 8 16 32 64 128 255>;
@@ -141,6 +141,43 @@
status = "okay";
};
+ lcd_display: display at di0 {
+ compatible = "fsl,imx-parallel-display";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ interface-pix-fmt = "bgr666";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_j15>;
+ status = "okay";
+
+ port at 0 {
+ reg = <0>;
+
+ lcd_display_in: endpoint {
+ remote-endpoint = <&ipu1_di0_disp0>;
+ };
+ };
+
+ port at 1 {
+ reg = <1>;
+
+ lcd_display_out: endpoint {
+ remote-endpoint = <&lcd_panel_in>;
+ };
+ };
+ };
+
+ lcd_panel {
+ compatible = "okaya,rs800480t-7x0gp";
+ backlight = <&backlight_lcd>;
+
+ port {
+ lcd_panel_in: endpoint {
+ remote-endpoint = <&lcd_display_out>;
+ };
+ };
+ };
+
panel {
compatible = "hannstar,hsd100pxn1";
backlight = <&backlight_lvds>;
@@ -348,6 +385,39 @@
>;
};
+ pinctrl_j15: j15grp {
+ fsl,pins = <
+ MX6QDL_PAD_DI0_DISP_CLK__IPU1_DI0_DISP_CLK 0x10
+ MX6QDL_PAD_DI0_PIN15__IPU1_DI0_PIN15 0x10
+ MX6QDL_PAD_DI0_PIN2__IPU1_DI0_PIN02 0x10
+ MX6QDL_PAD_DI0_PIN3__IPU1_DI0_PIN03 0x10
+ MX6QDL_PAD_DISP0_DAT0__IPU1_DISP0_DATA00 0x10
+ MX6QDL_PAD_DISP0_DAT1__IPU1_DISP0_DATA01 0x10
+ MX6QDL_PAD_DISP0_DAT2__IPU1_DISP0_DATA02 0x10
+ MX6QDL_PAD_DISP0_DAT3__IPU1_DISP0_DATA03 0x10
+ MX6QDL_PAD_DISP0_DAT4__IPU1_DISP0_DATA04 0x10
+ MX6QDL_PAD_DISP0_DAT5__IPU1_DISP0_DATA05 0x10
+ MX6QDL_PAD_DISP0_DAT6__IPU1_DISP0_DATA06 0x10
+ MX6QDL_PAD_DISP0_DAT7__IPU1_DISP0_DATA07 0x10
+ MX6QDL_PAD_DISP0_DAT8__IPU1_DISP0_DATA08 0x10
+ MX6QDL_PAD_DISP0_DAT9__IPU1_DISP0_DATA09 0x10
+ MX6QDL_PAD_DISP0_DAT10__IPU1_DISP0_DATA10 0x10
+ MX6QDL_PAD_DISP0_DAT11__IPU1_DISP0_DATA11 0x10
+ MX6QDL_PAD_DISP0_DAT12__IPU1_DISP0_DATA12 0x10
+ MX6QDL_PAD_DISP0_DAT13__IPU1_DISP0_DATA13 0x10
+ MX6QDL_PAD_DISP0_DAT14__IPU1_DISP0_DATA14 0x10
+ MX6QDL_PAD_DISP0_DAT15__IPU1_DISP0_DATA15 0x10
+ MX6QDL_PAD_DISP0_DAT16__IPU1_DISP0_DATA16 0x10
+ MX6QDL_PAD_DISP0_DAT17__IPU1_DISP0_DATA17 0x10
+ MX6QDL_PAD_DISP0_DAT18__IPU1_DISP0_DATA18 0x10
+ MX6QDL_PAD_DISP0_DAT19__IPU1_DISP0_DATA19 0x10
+ MX6QDL_PAD_DISP0_DAT20__IPU1_DISP0_DATA20 0x10
+ MX6QDL_PAD_DISP0_DAT21__IPU1_DISP0_DATA21 0x10
+ MX6QDL_PAD_DISP0_DAT22__IPU1_DISP0_DATA22 0x10
+ MX6QDL_PAD_DISP0_DAT23__IPU1_DISP0_DATA23 0x10
+ >;
+ };
+
pinctrl_pwm1: pwm1grp {
fsl,pins = <
MX6QDL_PAD_SD1_DAT3__PWM1_OUT 0x1b0b1
@@ -416,6 +486,10 @@
};
};
+&ipu1_di0_disp0 {
+ remote-endpoint = <&lcd_display_in>;
+};
+
&ldb {
status = "okay";
--
2.5.3
^ permalink raw reply related [flat|nested] 16+ messages in thread* [RESEND][PATCH v3 0/2] ARM: dts: add Okaya LCD display for Nitrogen and Sabrelite
2015-09-30 13:05 ` [RESEND][PATCH v3 0/2] ARM: dts: add Okaya LCD display for Nitrogen and Sabrelite Gary Bisson
2015-09-30 13:05 ` [RESEND][PATCH v3 1/2] ARM: dts: imx6qdl-nitrogen6x: add Okaya LCD panel Gary Bisson
2015-09-30 13:05 ` [RESEND][PATCH v3 2/2] ARM: dts: imx6qdl-sabrelite: " Gary Bisson
@ 2015-10-08 7:55 ` Shawn Guo
2 siblings, 0 replies; 16+ messages in thread
From: Shawn Guo @ 2015-10-08 7:55 UTC (permalink / raw)
To: linux-arm-kernel
On Wed, Sep 30, 2015 at 03:05:18PM +0200, Gary Bisson wrote:
> Gary Bisson (2):
> ARM: dts: imx6qdl-nitrogen6x: add Okaya LCD panel
> ARM: dts: imx6qdl-sabrelite: add Okaya LCD panel
Applied both, thanks.
^ permalink raw reply [flat|nested] 16+ messages in thread