From: philipp.zabel@gmail.com (Philipp Zabel)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH v2 01/21] ARM: pxa: magician: Fix Kconfig for magician to always include htc-egpio
Date: Wed, 19 Aug 2015 09:29:42 +0200 [thread overview]
Message-ID: <1439969382.11928.6.camel@gmail.com> (raw)
In-Reply-To: <55D38F60.7010405@tul.cz>
Am Dienstag, den 18.08.2015, 22:02 +0200 schrieb Petr Cvek:
> Dne 18.8.2015 v 20:31 Robert Jarzmik napsal(a):
> > Petr Cvek <petr.cvek@tul.cz> writes:
> >
> > > The htc-egpio driver should be always included in the kernel as
> > > it
> > > controls MMC/charging/IrDA power, which is the only way to get
> > > an useful rootfs.
> > >
> > > Signed-off-by: Petr Cvek <petr.cvek@tul.cz>
> > It's already defined in magician_defconfig, why enforce it in
> > Kconfig ?
>
> Good remark, I did not use defconfig at all (as I had to fix from
> zero configuration + I did not know if defconfig works and will be
> supported in the future).
>
> I will check if magician_defconfig needs to be updated (probably for
> leds).
>
> >
> > And if it's enforced and I want to build a kernel for magician
> > without
> > MMC/charging/IrDA, why should I be forced to build in HTC_EGPIO ?
> >
> > Or said differently, does a kernel without HTC_EGPIO is proven to
> > fail 100%
> > without this option ?
>
> Kernel will probably run OK, but the phone will be unusable (for any
> practical purposes). The EGPIO chip (CPLD) will stay in the state
> programmed from the previous environment (bootloader or WinCE/Mobile)
> and drivers fail to init because of the missing EGPIO (and if they
> init, they will be without any idea about state of the peripherals
> (no charger detection/charging current stuck on the previous
> settings, no LCD backlight control, no IrDA, no rootfs, no GSM, no
> sound, no LEDs).
>
> Different PCB revisions probably use EGPIO pin for LCD power (and at
> least on my phone, LCD power must have very specific order).
>
> For future (when ROM XIP will work) I would like to be able boot
> kernel from flash, which itself uses EGPIO for Vpp control (another
> initial EGPIO configuration). Last possible boot is from JTAG and
> there will be no previous EGPIO initialization.
>
> Petr
I agree with Robert, let's drop this patch.
regards
Philipp
next prev parent reply other threads:[~2015-08-19 7:29 UTC|newest]
Thread overview: 68+ messages / expand[flat|nested] mbox.gz Atom feed top
[not found] <cover.1439843482.git.petr.cvek@tul.cz>
2015-08-17 21:56 ` [PATCH v2 01/21] ARM: pxa: magician: Fix Kconfig for magician to always include htc-egpio Petr Cvek
2015-08-18 18:31 ` Robert Jarzmik
2015-08-18 20:02 ` Petr Cvek
2015-08-19 7:29 ` Philipp Zabel [this message]
2015-08-24 3:39 ` Petr Cvek
2015-08-17 21:56 ` [PATCH v2 02/21] ARM: pxa: magician: Fix indentation and whitespaces Petr Cvek
2015-08-18 18:32 ` Robert Jarzmik
2015-08-19 7:42 ` Philipp Zabel
2015-08-17 21:57 ` [PATCH v2 03/21] ARM: pxa: magician: Fix comments, debug functions and print strings Petr Cvek
2015-08-18 18:39 ` Robert Jarzmik
2015-08-18 23:09 ` Petr Cvek
2015-08-19 7:57 ` Philipp Zabel
2015-08-17 21:58 ` [PATCH v2 04/21] ARM: pxa: magician: Add, fix and init (new) GPIOs Petr Cvek
2015-08-18 19:01 ` Robert Jarzmik
2015-08-18 22:46 ` Petr Cvek
2015-08-17 21:58 ` [PATCH v2 05/21] ARM: pxa: magician: Add support for ADS7846 touchscreen Petr Cvek
2015-08-19 18:41 ` Robert Jarzmik
2015-08-17 21:59 ` [PATCH v2 06/21] ARM: pxa: magician: Add normal and power I2C definition Petr Cvek
2015-08-19 8:02 ` Philipp Zabel
2015-08-19 18:41 ` Robert Jarzmik
2015-08-17 21:59 ` [PATCH v2 07/21] ARM: pxa: magician: Fix IrDA pdata and redundant GPIO request Petr Cvek
2015-08-19 18:41 ` Robert Jarzmik
2015-08-17 22:00 ` [PATCH v2 08/21] ARM: pxa: magician: Add StrataFlash Vpp GPIO and alternative driver Petr Cvek
2015-08-17 22:01 ` [PATCH v2 09/21] ARM: pxa: magician: Add OV9640 camera support Petr Cvek
2015-08-20 19:48 ` Robert Jarzmik
2015-08-20 20:26 ` Arnd Bergmann
2015-08-20 22:39 ` Petr Cvek
2015-08-21 13:45 ` Arnd Bergmann
2015-08-21 17:36 ` Robert Jarzmik
2015-08-21 22:09 ` Petr Cvek
2015-08-22 12:41 ` Robert Jarzmik
2015-08-24 6:53 ` Lee Jones
2015-08-17 22:01 ` [PATCH v2 10/21] ARM: pxa: magician: Add UDA1380 sound support Petr Cvek
2015-08-20 19:51 ` Robert Jarzmik
2015-08-20 23:01 ` Petr Cvek
2015-08-28 8:48 ` Robert Jarzmik
2015-08-17 22:01 ` [PATCH v2 11/21] ARM: pxa: magician: Add MAX1586 Vcore regulator support Petr Cvek
2015-08-20 19:32 ` Robert Jarzmik
2015-08-20 22:33 ` Petr Cvek
2015-08-28 8:49 ` Robert Jarzmik
2015-08-17 22:02 ` [PATCH v2 12/21] ARM: pxa: magician: Add PXA27x UDC support Petr Cvek
2015-08-20 17:23 ` Robert Jarzmik
2015-08-20 22:21 ` Petr Cvek
2015-08-28 9:58 ` Robert Jarzmik
2015-08-17 22:03 ` [PATCH v2 13/21] ARM: pxa: magician: Fix charging source and add NiCd backup charging Petr Cvek
2015-08-17 22:18 ` Petr Cvek
2015-08-17 22:03 ` [PATCH v2 14/21] ARM: pxa: magician: Fix PXA USB OHCI port enable flags Petr Cvek
2015-08-17 22:03 ` [PATCH v2 15/21] ARM: pxa: magician: Fix PWM backlight regulator Petr Cvek
2015-08-20 19:58 ` Robert Jarzmik
2015-08-17 22:04 ` [PATCH v2 16/21] ARM: pxa: magician: Add support for alternative LCD backlight Petr Cvek
2015-08-20 20:01 ` Robert Jarzmik
2015-08-23 20:55 ` Petr Cvek
2015-08-24 8:25 ` Robert Jarzmik
2015-08-17 22:04 ` [PATCH v2 17/21] ARM: pxa: magician: Remove (temporarily) pasic3 LED support Petr Cvek
2015-08-22 16:25 ` Robert Jarzmik
2015-08-17 22:05 ` [PATCH v2 18/21] mfd: htc-pasic3: Prepare driver for leds-pasic3 Petr Cvek
2015-08-18 6:52 ` Lee Jones
2015-08-18 21:01 ` Petr Cvek
2015-08-19 6:58 ` Lee Jones
2015-08-17 22:06 ` [PATCH v2 19/21] leds: leds-pasic3: Add support for PASIC3 LED controller Petr Cvek
2015-08-17 22:14 ` Petr Cvek
2015-08-18 10:27 ` Jacek Anaszewski
2015-08-18 21:48 ` Petr Cvek
2015-08-19 8:09 ` Philipp Zabel
2015-08-19 8:49 ` Jacek Anaszewski
2015-08-17 22:06 ` [PATCH v2 20/21] ARM: pxa: magician: Re-add pdata for new leds-pasic3 driver Petr Cvek
2015-08-17 22:07 ` [PATCH v2 21/21] ARM: pxa: magician: Move platform_add_devices() to the end of magician_init() Petr Cvek
2015-08-22 16:27 ` Robert Jarzmik
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1439969382.11928.6.camel@gmail.com \
--to=philipp.zabel@gmail.com \
--cc=linux-arm-kernel@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).