linux-arm-kernel.lists.infradead.org archive mirror
 help / color / mirror / Atom feed
From: marc.zyngier@arm.com (Marc Zyngier)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH 23/25] KVM: arm/arm64: timer: Allow the timer to control the active state
Date: Thu, 20 Aug 2015 17:29:01 +0100	[thread overview]
Message-ID: <1440088143-4722-24-git-send-email-marc.zyngier@arm.com> (raw)
In-Reply-To: <1440088143-4722-1-git-send-email-marc.zyngier@arm.com>

In order to remove the crude hack where we sneak the masked bit
into the timer's control register, make use of the phys_irq_map
API control the active state of the interrupt.

This causes some limited changes to allow for potential error
propagation.

Reviewed-by: Christoffer Dall <christoffer.dall@linaro.org>
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
---
 arch/arm/kvm/reset.c         |  4 +---
 arch/arm64/kvm/reset.c       |  4 +---
 include/kvm/arm_arch_timer.h |  7 +++++--
 virt/kvm/arm/arch_timer.c    | 29 ++++++++++++++++++++++-------
 4 files changed, 29 insertions(+), 15 deletions(-)

diff --git a/arch/arm/kvm/reset.c b/arch/arm/kvm/reset.c
index f558c07..eeb8585 100644
--- a/arch/arm/kvm/reset.c
+++ b/arch/arm/kvm/reset.c
@@ -77,7 +77,5 @@ int kvm_reset_vcpu(struct kvm_vcpu *vcpu)
 	kvm_reset_coprocs(vcpu);
 
 	/* Reset arch_timer context */
-	kvm_timer_vcpu_reset(vcpu, cpu_vtimer_irq);
-
-	return 0;
+	return kvm_timer_vcpu_reset(vcpu, cpu_vtimer_irq);
 }
diff --git a/arch/arm64/kvm/reset.c b/arch/arm64/kvm/reset.c
index b4af618..91cf535 100644
--- a/arch/arm64/kvm/reset.c
+++ b/arch/arm64/kvm/reset.c
@@ -121,7 +121,5 @@ int kvm_reset_vcpu(struct kvm_vcpu *vcpu)
 	kvm_reset_sys_regs(vcpu);
 
 	/* Reset timer */
-	kvm_timer_vcpu_reset(vcpu, cpu_vtimer_irq);
-
-	return 0;
+	return kvm_timer_vcpu_reset(vcpu, cpu_vtimer_irq);
 }
diff --git a/include/kvm/arm_arch_timer.h b/include/kvm/arm_arch_timer.h
index e596675..e1e4d7c 100644
--- a/include/kvm/arm_arch_timer.h
+++ b/include/kvm/arm_arch_timer.h
@@ -52,13 +52,16 @@ struct arch_timer_cpu {
 
 	/* Timer IRQ */
 	const struct kvm_irq_level	*irq;
+
+	/* VGIC mapping */
+	struct irq_phys_map		*map;
 };
 
 int kvm_timer_hyp_init(void);
 void kvm_timer_enable(struct kvm *kvm);
 void kvm_timer_init(struct kvm *kvm);
-void kvm_timer_vcpu_reset(struct kvm_vcpu *vcpu,
-			  const struct kvm_irq_level *irq);
+int kvm_timer_vcpu_reset(struct kvm_vcpu *vcpu,
+			 const struct kvm_irq_level *irq);
 void kvm_timer_vcpu_init(struct kvm_vcpu *vcpu);
 void kvm_timer_flush_hwstate(struct kvm_vcpu *vcpu);
 void kvm_timer_sync_hwstate(struct kvm_vcpu *vcpu);
diff --git a/virt/kvm/arm/arch_timer.c b/virt/kvm/arm/arch_timer.c
index 98c95f2..76e38d2 100644
--- a/virt/kvm/arm/arch_timer.c
+++ b/virt/kvm/arm/arch_timer.c
@@ -64,10 +64,10 @@ static void kvm_timer_inject_irq(struct kvm_vcpu *vcpu)
 	int ret;
 	struct arch_timer_cpu *timer = &vcpu->arch.timer_cpu;
 
-	timer->cntv_ctl |= ARCH_TIMER_CTRL_IT_MASK;
-	ret = kvm_vgic_inject_irq(vcpu->kvm, vcpu->vcpu_id,
-				  timer->irq->irq,
-				  timer->irq->level);
+	kvm_vgic_set_phys_irq_active(timer->map, true);
+	ret = kvm_vgic_inject_mapped_irq(vcpu->kvm, vcpu->vcpu_id,
+					 timer->map,
+					 timer->irq->level);
 	WARN_ON(ret);
 }
 
@@ -117,7 +117,8 @@ bool kvm_timer_should_fire(struct kvm_vcpu *vcpu)
 	cycle_t cval, now;
 
 	if ((timer->cntv_ctl & ARCH_TIMER_CTRL_IT_MASK) ||
-		!(timer->cntv_ctl & ARCH_TIMER_CTRL_ENABLE))
+	    !(timer->cntv_ctl & ARCH_TIMER_CTRL_ENABLE) ||
+	    kvm_vgic_get_phys_irq_active(timer->map))
 		return false;
 
 	cval = timer->cntv_cval;
@@ -184,10 +185,11 @@ void kvm_timer_sync_hwstate(struct kvm_vcpu *vcpu)
 	timer_arm(timer, ns);
 }
 
-void kvm_timer_vcpu_reset(struct kvm_vcpu *vcpu,
-			  const struct kvm_irq_level *irq)
+int kvm_timer_vcpu_reset(struct kvm_vcpu *vcpu,
+			 const struct kvm_irq_level *irq)
 {
 	struct arch_timer_cpu *timer = &vcpu->arch.timer_cpu;
+	struct irq_phys_map *map;
 
 	/*
 	 * The vcpu timer irq number cannot be determined in
@@ -196,6 +198,17 @@ void kvm_timer_vcpu_reset(struct kvm_vcpu *vcpu,
 	 * vcpu timer irq number when the vcpu is reset.
 	 */
 	timer->irq = irq;
+
+	/*
+	 * Tell the VGIC that the virtual interrupt is tied to a
+	 * physical interrupt. We do that once per VCPU.
+	 */
+	map = kvm_vgic_map_phys_irq(vcpu, irq->irq, host_vtimer_irq);
+	if (WARN_ON(IS_ERR(map)))
+		return PTR_ERR(map);
+
+	timer->map = map;
+	return 0;
 }
 
 void kvm_timer_vcpu_init(struct kvm_vcpu *vcpu)
@@ -335,6 +348,8 @@ void kvm_timer_vcpu_terminate(struct kvm_vcpu *vcpu)
 	struct arch_timer_cpu *timer = &vcpu->arch.timer_cpu;
 
 	timer_disarm(timer);
+	if (timer->map)
+		kvm_vgic_unmap_phys_irq(vcpu, timer->map);
 }
 
 void kvm_timer_enable(struct kvm *kvm)
-- 
2.1.4

  parent reply	other threads:[~2015-08-20 16:29 UTC|newest]

Thread overview: 27+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2015-08-20 16:28 [GIT PULL] KVM/ARM pull request for 4.3 Marc Zyngier
2015-08-20 16:28 ` [PATCH 01/25] KVM: add comments for kvm_debug_exit_arch struct Marc Zyngier
2015-08-20 16:28 ` [PATCH 02/25] KVM: arm64: guest debug, define API headers Marc Zyngier
2015-08-20 16:28 ` [PATCH 03/25] KVM: arm: guest debug, add stub KVM_SET_GUEST_DEBUG ioctl Marc Zyngier
2015-08-20 16:28 ` [PATCH 04/25] KVM: arm: introduce kvm_arm_init/setup/clear_debug Marc Zyngier
2015-08-20 16:28 ` [PATCH 05/25] KVM: arm64: guest debug, add SW break point support Marc Zyngier
2015-08-20 16:28 ` [PATCH 06/25] KVM: arm64: guest debug, add support for single-step Marc Zyngier
2015-08-20 16:28 ` [PATCH 07/25] KVM: arm64: re-factor hyp.S debug register code Marc Zyngier
2015-08-20 16:28 ` [PATCH 08/25] KVM: arm64: introduce vcpu->arch.debug_ptr Marc Zyngier
2015-08-20 16:28 ` [PATCH 09/25] KVM: arm64: guest debug, HW assisted debug support Marc Zyngier
2015-08-20 16:28 ` [PATCH 10/25] KVM: arm64: enable KVM_CAP_SET_GUEST_DEBUG Marc Zyngier
2015-08-20 16:28 ` [PATCH 11/25] KVM: arm64: add trace points for guest_debug debug Marc Zyngier
2015-08-20 16:28 ` [PATCH 12/25] arm64/kvm: Add generic v8 KVM target Marc Zyngier
2015-08-20 16:28 ` [PATCH 13/25] arm64: KVM: remove remaining reference to vgic_sr_vectors Marc Zyngier
2015-08-20 16:28 ` [PATCH 14/25] arm/arm64: KVM: Fix ordering of timer/GIC on guest entry Marc Zyngier
2015-08-20 16:28 ` [PATCH 15/25] arm/arm64: KVM: Move vgic handling to a non-preemptible section Marc Zyngier
2015-08-20 16:28 ` [PATCH 16/25] KVM: arm/arm64: vgic: Convert struct vgic_lr to use bitfields Marc Zyngier
2015-08-20 16:28 ` [PATCH 17/25] KVM: arm/arm64: vgic: Allow HW irq to be encoded in LR Marc Zyngier
2015-08-20 16:28 ` [PATCH 18/25] KVM: arm/arm64: vgic: Relax vgic_can_sample_irq for edge IRQs Marc Zyngier
2015-08-20 16:28 ` [PATCH 19/25] KVM: arm/arm64: vgic: Allow dynamic mapping of physical/virtual interrupts Marc Zyngier
2015-08-20 16:28 ` [PATCH 20/25] KVM: arm/arm64: vgic: Allow HW interrupts to be queued to a guest Marc Zyngier
2015-08-20 16:28 ` [PATCH 21/25] KVM: arm/arm64: vgic: Add vgic_{get, set}_phys_irq_active Marc Zyngier
2015-08-20 16:29 ` [PATCH 22/25] KVM: arm/arm64: vgic: Prevent userspace injection of a mapped interrupt Marc Zyngier
2015-08-20 16:29 ` Marc Zyngier [this message]
2015-08-20 16:29 ` [PATCH 24/25] arm64: KVM: Optimize arm64 skip 30-50% vfp/simd save/restore on exits Marc Zyngier
2015-08-20 16:29 ` [PATCH 25/25] arm: KVM: keep arm vfp/simd exit handling consistent with arm64 Marc Zyngier
2015-08-22  7:00 ` [GIT PULL] KVM/ARM pull request for 4.3 Paolo Bonzini

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1440088143-4722-24-git-send-email-marc.zyngier@arm.com \
    --to=marc.zyngier@arm.com \
    --cc=linux-arm-kernel@lists.infradead.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).