From mboxrd@z Thu Jan 1 00:00:00 1970 From: b38611@freescale.com (Fugang Duan) Date: Mon, 24 Aug 2015 11:29:47 +0800 Subject: [PATCH v2 0/5] Add fec1 and fec2 support for i.MX7d sdb board Message-ID: <1440386992-6775-1-git-send-email-b38611@freescale.com> To: linux-arm-kernel@lists.infradead.org List-Id: linux-arm-kernel.lists.infradead.org The patch series is to add fec support for i.MX7d sdb board. Since i.MX7d fec ip is the same as i.MX6SX, so there have no change for driver itself. Patch#1: add bcm54220 PHY ID entry into brcmphy.h file. Patch#2: add new iomux-gpr file to define iomux-gpr register and field for i.MX7d. Patch#3: i.MX7d sdb board install bcm54220 phy, i.MX7d arm2 board install AR8031 phy. For the two phys, there needs extra phy setting, so package the setting to fixup. Patch#4~6: Add fec dts node and pinmux setting in dts file. Change: V2: * Remove patch#1 in V1 patch series. Move the sigle BCM54220 PHY ID define to machine file. * The current BCM54220 switch phy still use generic phy driver since broadcom phy driver don't support the switch phy, there need effort to add the switch phy support. Once broadcom phy driver will support the bcm54220 switch phy, we can add the special config to imx_v6_v7_defconfig. Fugang Duan (5): ARM: imx7d: add imx7d iomux-gpr field define ARM: imx: add enet init for i.MX7D platform ARM: dts: imx: pinfunc: add GPIO1 pin define for i.MX7d ARM: dts: imx7d: add fec1 and fec2 support for i.MX7d soc ARM: dts: imx7d-sdb: add fec1 and fec2 support arch/arm/boot/dts/imx7d-pinfunc.h | 115 +++++++++++++++++++++++++++++ arch/arm/boot/dts/imx7d-sdb.dts | 76 ++++++++++++++++++- arch/arm/boot/dts/imx7d.dtsi | 36 +++++++++ arch/arm/mach-imx/mach-imx7d.c | 76 ++++++++++++++++++- include/linux/mfd/syscon/imx7-iomuxc-gpr.h | 49 ++++++++++++ 5 files changed, 349 insertions(+), 3 deletions(-) create mode 100644 include/linux/mfd/syscon/imx7-iomuxc-gpr.h -- 1.9.1