From: wens@csie.org (Chen-Yu Tsai)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH 0/6] ARM: sunxi: Support MSI Primo81 tablet and Sinlinx SinA31s
Date: Fri, 28 Aug 2015 17:54:33 +0800 [thread overview]
Message-ID: <1440755679-8266-1-git-send-email-wens@csie.org> (raw)
Hi Maxime,
This series adds support for MSI's Primo81 tablet, and Sinlinx's SinA31s
development kit. This also adds a common axp221.dtsi, like we have for
axp209 and axp152. The Hummingbird A31 dts is also migrated to this.
The Primo81 patch is actually a v5. Changes since the last version can
be found in that patch.
Patch 1 adds an lradc node to sun6i-a31.dtsi. This is the same lradc
for tablet buttons found on the other sunxi SoCs.
Patch 2 adds a common dtsi for the AXP221 PMIC. This includes listing
all the regulators, and the basic common properties, like
"interrupt-controller".
Patch 3 migrates the Hummingbird A31 dts to use the new axp221.dtsi
Patch 4 adds the pinmux settings for A31/A31s mmc2 with 8-bit bus for
emmc.
Patch 5 adds dtsi/dts files for the Sinlinx SinA31s development kit.
Patch 6 adds a dts file for the A31s based MSI Primo81 tablet.
Regards
ChenYu
Chen-Yu Tsai (5):
ARM: dts: sun6i: Add lradc node
ARM: dts: sunxi: Add dtsi for AXP221 PMIC
ARM: dts: sun6i: hummingbird: Use axp221.dtsi for axp221 regulators
ARM: dts: sun6i: Add mmc2 pins for 8 bit emmc
ARM: dts: sun6i: Add support for Sinlinx A31s SDK board
Karsten Merker (1):
ARM: dts: sun6i: Add dts file for MSI Primo81 tablet
arch/arm/boot/dts/Makefile | 4 +-
arch/arm/boot/dts/axp221.dtsi | 148 ++++++++++++++
arch/arm/boot/dts/sun6i-a31-hummingbird.dts | 114 ++++++-----
arch/arm/boot/dts/sun6i-a31.dtsi | 17 ++
arch/arm/boot/dts/sun6i-a31s-primo81.dts | 255 +++++++++++++++++++++++++
arch/arm/boot/dts/sun6i-a31s-sina31s-core.dtsi | 131 +++++++++++++
arch/arm/boot/dts/sun6i-a31s-sina31s.dts | 149 +++++++++++++++
7 files changed, 759 insertions(+), 59 deletions(-)
create mode 100644 arch/arm/boot/dts/axp221.dtsi
create mode 100644 arch/arm/boot/dts/sun6i-a31s-primo81.dts
create mode 100644 arch/arm/boot/dts/sun6i-a31s-sina31s-core.dtsi
create mode 100644 arch/arm/boot/dts/sun6i-a31s-sina31s.dts
--
2.5.0
next reply other threads:[~2015-08-28 9:54 UTC|newest]
Thread overview: 28+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-08-28 9:54 Chen-Yu Tsai [this message]
2015-08-28 9:54 ` [PATCH 1/6] ARM: dts: sun6i: Add lradc node Chen-Yu Tsai
2015-08-28 12:30 ` Maxime Ripard
2015-08-28 9:54 ` [PATCH 2/6] ARM: dts: sunxi: Add dtsi for AXP221 PMIC Chen-Yu Tsai
2015-08-28 12:31 ` Maxime Ripard
2015-08-28 16:09 ` Chen-Yu Tsai
2015-08-28 20:43 ` Maxime Ripard
2015-08-29 2:07 ` Chen-Yu Tsai
2015-09-01 6:29 ` Maxime Ripard
2015-09-01 6:40 ` Chen-Yu Tsai
2015-09-03 20:07 ` Maxime Ripard
2015-08-28 9:54 ` [PATCH 3/6] ARM: dts: sun6i: hummingbird: Use axp221.dtsi for axp221 regulators Chen-Yu Tsai
2015-08-28 12:32 ` Maxime Ripard
2015-08-28 16:47 ` Chen-Yu Tsai
2015-08-28 20:44 ` Maxime Ripard
2015-08-28 9:54 ` [PATCH 4/6] ARM: dts: sun6i: Add mmc2 pins for 8 bit emmc Chen-Yu Tsai
2015-08-28 12:33 ` Maxime Ripard
2015-08-28 9:54 ` [PATCH 5/6] ARM: dts: sun6i: Add support for Sinlinx A31s SDK board Chen-Yu Tsai
2015-08-28 12:34 ` Maxime Ripard
2015-09-14 7:24 ` Chen-Yu Tsai
2015-09-16 6:20 ` Maxime Ripard
2015-09-18 9:36 ` Chen-Yu Tsai
2015-08-28 9:54 ` [PATCH 6/6] ARM: dts: sun6i: Add dts file for MSI Primo81 tablet Chen-Yu Tsai
2015-08-28 12:38 ` Maxime Ripard
2015-08-28 13:31 ` Siarhei Siamashka
2015-08-28 21:02 ` Maxime Ripard
2015-08-29 4:43 ` Siarhei Siamashka
2015-09-10 13:09 ` Maxime Ripard
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1440755679-8266-1-git-send-email-wens@csie.org \
--to=wens@csie.org \
--cc=linux-arm-kernel@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).