linux-arm-kernel.lists.infradead.org archive mirror
 help / color / mirror / Atom feed
From: wens@csie.org (Chen-Yu Tsai)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH 2/6] ARM: dts: sunxi: Add dtsi for AXP221 PMIC
Date: Fri, 28 Aug 2015 17:54:35 +0800	[thread overview]
Message-ID: <1440755679-8266-3-git-send-email-wens@csie.org> (raw)
In-Reply-To: <1440755679-8266-1-git-send-email-wens@csie.org>

The AXP221 PMIC is used with some Allwinner SoCs. This patch adds
a dtsi file listing all the regulator nodes. The regulators are
initialized based on their device node names.

This can later be used with the AXP223 PMIC as well, which has
the same functionality as AXP221, except for its host interface.

Signed-off-by: Chen-Yu Tsai <wens@csie.org>
---
 arch/arm/boot/dts/axp221.dtsi | 148 ++++++++++++++++++++++++++++++++++++++++++
 1 file changed, 148 insertions(+)
 create mode 100644 arch/arm/boot/dts/axp221.dtsi

diff --git a/arch/arm/boot/dts/axp221.dtsi b/arch/arm/boot/dts/axp221.dtsi
new file mode 100644
index 000000000000..74836f329863
--- /dev/null
+++ b/arch/arm/boot/dts/axp221.dtsi
@@ -0,0 +1,148 @@
+/*
+ * Copyright 2015 Chen-Yu Tsai
+ *
+ * Chen-Yu Tsai <wens@csie.org>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/*
+ * AXP221/221s/223 Integrated Power Management Chip
+ * http://www.x-powers.com/product/AXP22X.php
+ * http://dl.linux-sunxi.org/AXP/AXP221%20Datasheet%20V1.2%2020130326%20.pdf
+ */
+
+&axp221 {
+	compatible = "x-powers,axp221";
+	interrupt-controller;
+	#interrupt-cells = <1>;
+
+	regulators {
+		/* Default work frequency for buck regulators */
+		x-powers,dcdc-freq = <3000>;
+
+		/* supplies for dc1sw & dc5ldo are connected internally */
+		dcdc1-supply = <&reg_dcdc1>;
+		dcdc5-supply = <&reg_dcdc5>;
+
+		reg_dcdc1: dcdc1 {
+			regulator-name = "dcdc1";
+		};
+
+		reg_dcdc2: dcdc2 {
+			regulator-name = "dcdc2";
+		};
+
+		reg_dcdc3: dcdc3 {
+			regulator-name = "dcdc3";
+		};
+
+		reg_dcdc4: dcdc4 {
+			regulator-name = "dcdc4";
+		};
+
+		reg_dcdc5: dcdc5 {
+			regulator-name = "dcdc5";
+		};
+
+		reg_dc1sw: dc1sw {
+			regulator-name = "dc1sw";
+		};
+
+		reg_dc5ldo: dc5ldo {
+			regulator-name = "dc5ldo";
+		};
+
+		reg_aldo1: aldo1 {
+			regulator-name = "aldo1";
+		};
+
+		reg_aldo2: aldo2 {
+			regulator-name = "aldo2";
+		};
+
+		reg_aldo3: aldo3 {
+			regulator-name = "aldo3";
+		};
+
+		reg_dldo1: dldo1 {
+			regulator-name = "dldo1";
+		};
+
+		reg_dldo2: dldo2 {
+			regulator-name = "dldo2";
+		};
+
+		reg_dldo3: dldo3 {
+			regulator-name = "dldo3";
+		};
+
+		reg_dldo4: dldo4 {
+			regulator-name = "dldo4";
+		};
+
+		reg_eldo1: eldo1 {
+			regulator-name = "eldo1";
+		};
+
+		reg_eldo2: eldo2 {
+			regulator-name = "eldo2";
+		};
+
+		reg_eldo3: eldo3 {
+			regulator-name = "eldo3";
+		};
+
+		reg_ldo_io0: ldo_io0 {
+			regulator-name = "ldo_io0";
+		};
+
+		reg_ldo_io1: ldo_io1 {
+			regulator-name = "ldo_io1";
+		};
+
+		reg_rtc_ldo: rtc_ldo {
+			/* RTC_LDO is a fixed, always-on regulator */
+			regulator-always-on;
+			regulator-min-microvolt = <3000000>;
+			regulator-max-microvolt = <3000000>;
+			regulator-name = "rtc_ldo";
+		};
+	};
+};
-- 
2.5.0

  parent reply	other threads:[~2015-08-28  9:54 UTC|newest]

Thread overview: 28+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2015-08-28  9:54 [PATCH 0/6] ARM: sunxi: Support MSI Primo81 tablet and Sinlinx SinA31s Chen-Yu Tsai
2015-08-28  9:54 ` [PATCH 1/6] ARM: dts: sun6i: Add lradc node Chen-Yu Tsai
2015-08-28 12:30   ` Maxime Ripard
2015-08-28  9:54 ` Chen-Yu Tsai [this message]
2015-08-28 12:31   ` [PATCH 2/6] ARM: dts: sunxi: Add dtsi for AXP221 PMIC Maxime Ripard
2015-08-28 16:09     ` Chen-Yu Tsai
2015-08-28 20:43       ` Maxime Ripard
2015-08-29  2:07         ` Chen-Yu Tsai
2015-09-01  6:29           ` Maxime Ripard
2015-09-01  6:40             ` Chen-Yu Tsai
2015-09-03 20:07               ` Maxime Ripard
2015-08-28  9:54 ` [PATCH 3/6] ARM: dts: sun6i: hummingbird: Use axp221.dtsi for axp221 regulators Chen-Yu Tsai
2015-08-28 12:32   ` Maxime Ripard
2015-08-28 16:47     ` Chen-Yu Tsai
2015-08-28 20:44       ` Maxime Ripard
2015-08-28  9:54 ` [PATCH 4/6] ARM: dts: sun6i: Add mmc2 pins for 8 bit emmc Chen-Yu Tsai
2015-08-28 12:33   ` Maxime Ripard
2015-08-28  9:54 ` [PATCH 5/6] ARM: dts: sun6i: Add support for Sinlinx A31s SDK board Chen-Yu Tsai
2015-08-28 12:34   ` Maxime Ripard
2015-09-14  7:24     ` Chen-Yu Tsai
2015-09-16  6:20       ` Maxime Ripard
2015-09-18  9:36         ` Chen-Yu Tsai
2015-08-28  9:54 ` [PATCH 6/6] ARM: dts: sun6i: Add dts file for MSI Primo81 tablet Chen-Yu Tsai
2015-08-28 12:38   ` Maxime Ripard
2015-08-28 13:31     ` Siarhei Siamashka
2015-08-28 21:02       ` Maxime Ripard
2015-08-29  4:43         ` Siarhei Siamashka
2015-09-10 13:09           ` Maxime Ripard

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1440755679-8266-3-git-send-email-wens@csie.org \
    --to=wens@csie.org \
    --cc=linux-arm-kernel@lists.infradead.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).