linux-arm-kernel.lists.infradead.org archive mirror
 help / color / mirror / Atom feed
From: lee.jones@linaro.org (Lee Jones)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH v2 1/4] ARM: STiH407: Add nodes for RemoteProc
Date: Fri, 28 Aug 2015 11:31:48 +0100	[thread overview]
Message-ID: <1440757911-9120-2-git-send-email-lee.jones@linaro.org> (raw)
In-Reply-To: <1440757911-9120-1-git-send-email-lee.jones@linaro.org>

Signed-off-by: Ludovic Barre <ludovic.barre@st.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
---
 arch/arm/boot/dts/stih407-family.dtsi | 48 +++++++++++++++++++++++++++++++++++
 1 file changed, 48 insertions(+)

diff --git a/arch/arm/boot/dts/stih407-family.dtsi b/arch/arm/boot/dts/stih407-family.dtsi
index 33daa49..89a363c 100644
--- a/arch/arm/boot/dts/stih407-family.dtsi
+++ b/arch/arm/boot/dts/stih407-family.dtsi
@@ -608,5 +608,53 @@
 			status		= "okay";
 			tx-only;
 		};
+
+		st231_gp0: st231-gp0 at 0 {
+			compatible = "st,st231-rproc";
+			reg = <0x40000000 0x01000000>;
+			reg-names = "carveout";
+			resets = <&softreset STIH407_ST231_GP0_SOFTRESET>;
+			reset-names = "sw_reset";
+			clocks = <&clk_s_c0_flexgen CLK_ST231_GP_0>;
+			clock-names = "rproc_clk";
+			clock-frequency = <600000000>;
+			st,syscfg-boot = <&syscfg_core 0x22C>;
+		};
+
+		st231_gp1: st231-gp1 at 0 {
+			compatible = "st,st231-rproc";
+			reg = <0x41000000 0x01000000>;
+			reg-names = "carveout";
+			resets = <&softreset STIH407_ST231_GP1_SOFTRESET>;
+			reset-names = "sw_reset";
+			clocks = <&clk_s_c0_flexgen CLK_ST231_GP_1>;
+			clock-names = "rproc_clk";
+			clock-frequency = <600000000>;
+			st,syscfg-boot = <&syscfg_core 0x220>;
+		};
+
+		st231_audio: st231-audio at 0 {
+			compatible = "st,st231-rproc";
+			reg = <0x42000000 0x01000000>;
+			reg-names = "carveout";
+			resets = <&softreset STIH407_ST231_AUD_SOFTRESET>;
+			reset-names = "sw_reset";
+			clocks = <&clk_s_c0_flexgen CLK_ST231_AUD_0>;
+			clock-names = "rproc_clk";
+			clock-frequency = <600000000>;
+			st,syscfg-boot = <&syscfg_core 0x228>;
+		};
+
+		st231_dmu: st231-dmu at 0 {
+			compatible = "st,st231-rproc";
+			reg = <0x43000000 0x01000000>;
+			reg-names = "carveout";
+			resets = <&softreset STIH407_ST231_DMU_SOFTRESET>;
+			reset-names = "sw_reset";
+			clocks = <&clk_s_c0_flexgen CLK_ST231_DMU>;
+			clock-names = "rproc_clk";
+			clock-frequency = <600000000>;
+			st,syscfg-boot = <&syscfg_core 0x224>;
+		};
 	};
 };
-- 
1.9.1

  reply	other threads:[~2015-08-28 10:31 UTC|newest]

Thread overview: 22+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2015-08-28 10:31 [PATCH v2 0/4] remoteproc: Add driver for STMicroelectronics platforms Lee Jones
2015-08-28 10:31 ` Lee Jones [this message]
2015-09-01  8:28   ` [STLinux Kernel] [PATCH v2 1/4] ARM: STiH407: Add nodes for RemoteProc Peter Griffin
2015-09-01  9:11     ` Lee Jones
2015-09-01  9:17       ` Peter Griffin
2015-08-28 10:31 ` [PATCH v2 2/4] remoteproc: dt: Provide bindings for ST's Remote Processor Controller driver Lee Jones
2015-08-31 15:28   ` Rob Herring
2015-09-01 10:41     ` Lee Jones
2015-09-01 11:49       ` Rob Herring
2015-09-01  8:58   ` [STLinux Kernel] " Peter Griffin
2015-09-01  9:14     ` Lee Jones
2015-09-01 12:54     ` Lee Jones
2015-08-28 10:31 ` [PATCH v2 3/4] remoteproc: Supply controller driver for ST's Remote Processors Lee Jones
2015-08-28 16:24   ` Nathan Lynch
2015-09-01  7:55     ` Lee Jones
2015-09-01  8:17       ` [STLinux Kernel] " Peter Griffin
2015-09-01  9:12         ` Lee Jones
2015-08-28 10:31 ` [PATCH v2 4/4] remoteproc: debugfs: Add ability to boot remote processor using debugfs Lee Jones
2015-08-28 15:23   ` Nathan Lynch
2015-09-01  7:48     ` Lee Jones
2015-08-28 17:17   ` Florian Fainelli
2015-09-01  7:41     ` Lee Jones

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1440757911-9120-2-git-send-email-lee.jones@linaro.org \
    --to=lee.jones@linaro.org \
    --cc=linux-arm-kernel@lists.infradead.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).