[PATCH 2/2] arm64/apm: add dts for Gigabyte MP30-AR0 board

[j@jannau.net (Janne Grunau)]

Creates apm-storm-883408.dtsi which should be shareable with the HP
Moonshot m400 cartridge.

Signed-off-by: Janne Grunau <j@jannau.net>
---
 arch/arm64/boot/dts/apm/Makefile              |  1 +
 arch/arm64/boot/dts/apm/apm-storm-883408.dtsi | 98 +++++++++++++++++++++++++++
 arch/arm64/boot/dts/apm/mp30ar0.dts           | 85 +++++++++++++++++++++++
 3 files changed, 184 insertions(+)
 create mode 100644 arch/arm64/boot/dts/apm/apm-storm-883408.dtsi
 create mode 100644 arch/arm64/boot/dts/apm/mp30ar0.dts

diff --git a/arch/arm64/boot/dts/apm/Makefile b/arch/arm64/boot/dts/apm/Makefile
index a2afabb..b0ec2b6 100644
--- a/arch/arm64/boot/dts/apm/Makefile
+++ b/arch/arm64/boot/dts/apm/Makefile
@@ -1,4 +1,5 @@
 dtb-$(CONFIG_ARCH_XGENE) += apm-mustang.dtb
+dtb-$(CONFIG_ARCH_XGENE) += mp30ar0.dtb
 
 always		:= $(dtb-y)
 subdir-y	:= $(dts-dirs)
diff --git a/arch/arm64/boot/dts/apm/apm-storm-883408.dtsi b/arch/arm64/boot/dts/apm/apm-storm-883408.dtsi
new file mode 100644
index 0000000..83116df
--- /dev/null
+++ b/arch/arm64/boot/dts/apm/apm-storm-883408.dtsi
@@ -0,0 +1,98 @@
+/*
+ * dts file for AppliedMicro (APM) X-Gene Storm SOC APM883408
+ *
+ * Copyright (C) 2013, Applied Micro Circuits Corporation
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ */
+
+/ {
+	compatible = "apm,xgene-storm";
+	interrupt-parent = <&gic>;
+	#address-cells = <2>;
+	#size-cells = <2>;
+
+	cpus {
+		#address-cells = <2>;
+		#size-cells = <0>;
+
+		cpu at 000 {
+			device_type = "cpu";
+			compatible = "apm,potenza", "arm,armv8";
+			reg = <0x0 0x000>;
+			enable-method = "spin-table";
+			cpu-release-addr = <0x40 0x0000fff8>;
+		};
+		cpu at 001 {
+			device_type = "cpu";
+			compatible = "apm,potenza", "arm,armv8";
+			reg = <0x0 0x001>;
+			enable-method = "spin-table";
+			cpu-release-addr = <0x40 0x0000fff8>;
+		};
+		cpu at 100 {
+			device_type = "cpu";
+			compatible = "apm,potenza", "arm,armv8";
+			reg = <0x0 0x100>;
+			enable-method = "spin-table";
+			cpu-release-addr = <0x40 0x0000fff8>;
+		};
+		cpu at 101 {
+			device_type = "cpu";
+			compatible = "apm,potenza", "arm,armv8";
+			reg = <0x0 0x101>;
+			enable-method = "spin-table";
+			cpu-release-addr = <0x40 0x0000fff8>;
+		};
+		cpu at 200 {
+			device_type = "cpu";
+			compatible = "apm,potenza", "arm,armv8";
+			reg = <0x0 0x200>;
+			enable-method = "spin-table";
+			cpu-release-addr = <0x40 0x0000fff8>;
+		};
+		cpu at 201 {
+			device_type = "cpu";
+			compatible = "apm,potenza", "arm,armv8";
+			reg = <0x0 0x201>;
+			enable-method = "spin-table";
+			cpu-release-addr = <0x40 0x0000fff8>;
+		};
+		cpu at 300 {
+			device_type = "cpu";
+			compatible = "apm,potenza", "arm,armv8";
+			reg = <0x0 0x300>;
+			enable-method = "spin-table";
+			cpu-release-addr = <0x40 0x0000fff8>;
+		};
+		cpu at 301 {
+			device_type = "cpu";
+			compatible = "apm,potenza", "arm,armv8";
+			reg = <0x0 0x301>;
+			enable-method = "spin-table";
+			cpu-release-addr = <0x40 0x0000fff8>;
+		};
+	};
+
+	gic: interrupt-controller at 78090000 {
+		compatible = "arm,cortex-a15-gic";
+		#interrupt-cells = <3>;
+		interrupt-controller;
+		reg = <0x0 0x78090000 0x0 0x10000>,	/* GIC Dist */
+		      <0x0 0x780a0000 0x0 0x10000>,	/* GIC CPU */
+		      <0x0 0x780c0000 0x0 0x20000>,	/* GIC VCPU Control */
+		      <0x0 0x780e0000 0x0 0x20000>;	/* GIC VCPU */
+		interrupts = <1 9 0xf04>;
+	};
+	timer {
+		compatible = "arm,armv8-timer";
+		interrupts = <1 0 0xff04>,	/* Secure Phys IRQ */
+			     <1 13 0xff04>,	/* Non-secure Phys IRQ */
+			     <1 14 0xff04>,	/* Virt IRQ */
+			     <1 15 0xff04>;	/* Hyp IRQ */
+		clock-frequency = <50000000>;
+	};
+};
diff --git a/arch/arm64/boot/dts/apm/mp30ar0.dts b/arch/arm64/boot/dts/apm/mp30ar0.dts
new file mode 100644
index 0000000..f7a9dae5
--- /dev/null
+++ b/arch/arm64/boot/dts/apm/mp30ar0.dts
@@ -0,0 +1,85 @@
+/*
+ * dts file for Gigabyte MP30-AR0 board
+ *
+ * Copyright (C) 2013, Applied Micro Circuits Corporation
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ */
+
+/dts-v1/;
+
+/include/ "apm-storm-883408.dtsi"
+/include/ "apm-storm-soc.dtsi"
+
+/ {
+	pmu {
+		compatible = "arm,armv8-pmuv3";
+		interrupts = <0x1 0xc 0xff04>;
+	};
+
+	memory {
+		#address-cells = <0x2>;
+		#size-cells = <0x2>;
+		device_type = "memory";
+		reg = <0x0 0x0 0x0 0x2000000>;
+	};
+
+	poweroff_mbox: poweroff_mbox at 10548000 {
+		compatible = "syscon";
+		reg = <0x0 0x10548000 0x0 0x100>;
+	};
+
+	poweroff at 10548010 {
+		compatible = "syscon-poweroff";
+		regmap = <&poweroff_mbox>;
+		offset = <0x10>;
+		mask = <0x1>;
+	};
+
+	chosen {
+		linux,stdout-path = "/soc/serial at 1c020000";
+	};
+};
+
+&pcie0clk {
+	status = "ok";
+};
+
+&pcie2clk {
+	status = "ok";
+};
+
+&pcie3clk {
+	status = "ok";
+};
+
+&pcie0 {
+	status = "ok";
+};
+
+&pcie2 {
+	status = "ok";
+};
+
+&pcie3 {
+	status = "ok";
+};
+
+&serial0 {
+	status = "ok";
+};
+
+&sgenet0 {
+	status = "ok";
+};
+
+&sgenet1 {
+	status = "ok";
+};
+
+&xgenet {
+	status = "ok";
+};
-- 
2.5.0