linux-arm-kernel.lists.infradead.org archive mirror
 help / color / mirror / Atom feed
From: gary.bisson@boundarydevices.com (Gary Bisson)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH v3 0/9] ARM: dts: update Boundary Devices boards support
Date: Wed,  9 Sep 2015 14:30:44 +0200	[thread overview]
Message-ID: <1441801853-10264-1-git-send-email-gary.bisson@boundarydevices.com> (raw)
In-Reply-To: <1441645069-27263-1-git-send-email-gary.bisson@boundarydevices.com>

Hi all,

This series is a follow-up to the previous series that added LCD display
support.
http://lists.infradead.org/pipermail/linux-arm-kernel/2015-August/364425.html

This one aims at adding touchscreen and WiFi support for Nitrogen6x as well as
adding two boards: Nitrogen6_Max and Nit6xlite.

It also takes care of updating the licenses to be GPLv2/X11.

The series has been tested against linux-next tag next-20150909.

Note that imx_v6_v7_defconfig has been used with the following additions:
CONFIG_TOUCHSCREEN_EDT_FT5X06=y
CONFIG_I2C_MUX_GPIO=y
CONFIG_RTC_DRV_M41T80=y

Modifications:
v2->v3:
- Rename nodes to general class of device as suggested by Philipp and Russell.
- Remove useless wakeup-gpio field for edt,ft5x06 touchscreen
- Add missing muxing for interrupt GPIO
- Rebased on next-20150909
v1->v2:
- Add Boundary Devices Inc. to vendor prefixes
- Relicense devices trees to GPLv2/X11 as suggested by Fabio for:
  - Nitrogen6x
  - SabreLite
  - Nit6xLite
  - Nitrogen6_MAX
- Change manufacturer to Boundary Devices as suggested by Fabio for:
  - Nitrogen6x
  - Nit6xLite
  - Nitrogen6_MAX
- Fixed missing macros for gpio/irq values as suggested by Philipp.
- Rebased on next-20150908

Regards,
Gary

Gary Bisson (9):
  ARM: dts: imx6dql-nitrogen6x: add touchscreen support
  ARM: dts: imx6qdl-nitrogen6x: add wifi wl1271 support
  ARM: dts: imx6qdl-nitrogen6x: relicense under GPLv2/X11
  ARM: dts: imx6qdl-sabrelite: relicense under GPLv2/X11
  of: Add Boundary Devices Inc. vendor prefix
  ARM: dts: imx6q-nitrogen6x: change manufacturer to Boundary Devices
  ARM: dts: imx6dl-nitrogen6x: change manufacturer to Boundary Devices
  ARM: dts: imx: add Boundary Devices Nitrogen6_Max board
  ARM: dts: imx: add Boundary Devices Nitrogen6_Lite board

 .../devicetree/bindings/vendor-prefixes.txt        |   1 +
 arch/arm/boot/dts/Makefile                         |   2 +
 arch/arm/boot/dts/imx6dl-nit6xlite.dts             |  49 ++
 arch/arm/boot/dts/imx6dl-nitrogen6x.dts            |  44 +-
 arch/arm/boot/dts/imx6dl-sabrelite.dts             |  40 +-
 arch/arm/boot/dts/imx6q-nitrogen6_max.dts          |  53 ++
 arch/arm/boot/dts/imx6q-nitrogen6x.dts             |  44 +-
 arch/arm/boot/dts/imx6q-sabrelite.dts              |  40 +-
 ...6qdl-nitrogen6x.dtsi => imx6qdl-nit6xlite.dtsi} | 396 ++++++----
 arch/arm/boot/dts/imx6qdl-nitrogen6_max.dtsi       | 873 +++++++++++++++++++++
 arch/arm/boot/dts/imx6qdl-nitrogen6x.dtsi          | 111 ++-
 arch/arm/boot/dts/imx6qdl-sabrelite.dtsi           |  40 +-
 12 files changed, 1523 insertions(+), 170 deletions(-)
 create mode 100644 arch/arm/boot/dts/imx6dl-nit6xlite.dts
 create mode 100644 arch/arm/boot/dts/imx6q-nitrogen6_max.dts
 copy arch/arm/boot/dts/{imx6qdl-nitrogen6x.dtsi => imx6qdl-nit6xlite.dtsi} (50%)
 create mode 100644 arch/arm/boot/dts/imx6qdl-nitrogen6_max.dtsi

-- 
2.5.1

  parent reply	other threads:[~2015-09-09 12:30 UTC|newest]

Thread overview: 46+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2015-09-07 16:57 [PATCH 0/4] ARM: dts: update Boundary Devices boards support Gary Bisson
2015-09-07 16:57 ` [PATCH 1/4] ARM: dts: imx6dql-nitrogen6x: add touchscreen support Gary Bisson
2015-09-08  6:58   ` Philipp Zabel
2015-09-08 13:12     ` Gary Bisson
2015-09-07 16:57 ` [PATCH 2/4] ARM: dts: imx6qdl-nitrogen6x: add wifi wl1271 support Gary Bisson
2015-09-07 16:57 ` [PATCH 3/4] ARM: dts: imx: add Boundary Devices Nitrogen6_Max board Gary Bisson
2015-09-07 16:57 ` [PATCH 4/4] ARM: dts: imx: add Boundary Devices Nitrogen6_Lite board Gary Bisson
2015-09-08  1:08   ` Fabio Estevam
2015-09-08 10:18     ` Gary Bisson
2015-09-08 11:41       ` Fabio Estevam
2015-09-08 14:34 ` [PATCH v2 0/9] ARM: dts: update Boundary Devices boards support Gary Bisson
2015-09-08 14:34   ` [PATCH v2 1/9] ARM: dts: imx6dql-nitrogen6x: add touchscreen support Gary Bisson
2015-09-08 14:49     ` Philipp Zabel
2015-09-08 20:33       ` Russell King - ARM Linux
2015-09-09 10:03       ` Gary Bisson
2015-09-08 14:34   ` [PATCH v2 2/9] ARM: dts: imx6qdl-nitrogen6x: add wifi wl1271 support Gary Bisson
2015-09-08 14:34   ` [PATCH v2 3/9] ARM: dts: imx6qdl-nitrogen6x: relicense under GPLv2/X11 Gary Bisson
2015-09-08 14:34   ` [PATCH v2 4/9] ARM: dts: imx6qdl-sabrelite: " Gary Bisson
2015-09-08 14:34   ` [PATCH v2 5/9] of: Add Boundary Devices Inc. vendor prefix Gary Bisson
2015-09-08 14:34   ` [PATCH v2 6/9] ARM: dts: imx6q-nitrogen6x: change manufacturer to Boundary Devices Gary Bisson
2015-09-08 14:34   ` [PATCH v2 7/9] ARM: dts: imx6dl-nitrogen6x: " Gary Bisson
2015-09-08 14:34   ` [PATCH v2 8/9] ARM: dts: imx: add Boundary Devices Nitrogen6_Max board Gary Bisson
2015-09-08 14:34   ` [PATCH v2 9/9] ARM: dts: imx: add Boundary Devices Nitrogen6_Lite board Gary Bisson
2015-09-09 12:30 ` Gary Bisson [this message]
2015-09-09 12:30   ` [PATCH v3 1/9] ARM: dts: imx6dql-nitrogen6x: add touchscreen support Gary Bisson
2015-09-09 12:30   ` [PATCH v3 2/9] ARM: dts: imx6qdl-nitrogen6x: add wifi wl1271 support Gary Bisson
2015-09-09 12:30   ` [PATCH v3 3/9] ARM: dts: imx6qdl-nitrogen6x: relicense under GPLv2/X11 Gary Bisson
2015-09-09 12:30   ` [PATCH v3 4/9] ARM: dts: imx6qdl-sabrelite: " Gary Bisson
2015-09-09 12:30   ` [PATCH v3 5/9] of: Add Boundary Devices Inc. vendor prefix Gary Bisson
2015-09-09 12:30   ` [PATCH v3 6/9] ARM: dts: imx6q-nitrogen6x: change manufacturer to Boundary Devices Gary Bisson
2015-09-09 12:30   ` [PATCH v3 7/9] ARM: dts: imx6dl-nitrogen6x: " Gary Bisson
2015-09-09 12:30   ` [PATCH v3 8/9] ARM: dts: imx: add Boundary Devices Nitrogen6_Max board Gary Bisson
2015-09-09 12:30   ` [PATCH v3 9/9] ARM: dts: imx: add Boundary Devices Nitrogen6_Lite board Gary Bisson
2015-09-30  6:03   ` [PATCH v3 0/9] ARM: dts: update Boundary Devices boards support Shawn Guo
2015-09-30 13:46 ` [RESEND][PATCH " Gary Bisson
2015-09-30 13:46   ` [RESEND][PATCH v3 1/9] ARM: dts: imx6dql-nitrogen6x: add touchscreen support Gary Bisson
2015-09-30 13:46   ` [RESEND][PATCH v3 2/9] ARM: dts: imx6qdl-nitrogen6x: add wifi wl1271 support Gary Bisson
2015-09-30 13:46   ` [RESEND][PATCH v3 3/9] ARM: dts: imx6qdl-nitrogen6x: relicense under GPLv2/X11 Gary Bisson
2015-09-30 13:46   ` [RESEND][PATCH v3 4/9] ARM: dts: imx6qdl-sabrelite: " Gary Bisson
2015-09-30 13:46   ` [RESEND][PATCH v3 5/9] of: Add Boundary Devices Inc. vendor prefix Gary Bisson
2015-10-01 13:26     ` Rob Herring
2015-09-30 13:46   ` [RESEND][PATCH v3 6/9] ARM: dts: imx6q-nitrogen6x: change manufacturer to Boundary Devices Gary Bisson
2015-09-30 13:46   ` [RESEND][PATCH v3 7/9] ARM: dts: imx6dl-nitrogen6x: " Gary Bisson
2015-09-30 13:46   ` [RESEND][PATCH v3 8/9] ARM: dts: imx: add Boundary Devices Nitrogen6_Max board Gary Bisson
2015-09-30 13:46   ` [RESEND][PATCH v3 9/9] ARM: dts: imx: add Boundary Devices Nitrogen6_Lite board Gary Bisson
2015-10-08  8:02   ` [RESEND][PATCH v3 0/9] ARM: dts: update Boundary Devices boards support Shawn Guo

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1441801853-10264-1-git-send-email-gary.bisson@boundarydevices.com \
    --to=gary.bisson@boundarydevices.com \
    --cc=linux-arm-kernel@lists.infradead.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).