linux-arm-kernel.lists.infradead.org archive mirror
 help / color / mirror / Atom feed
From: peter.griffin@linaro.org (Peter Griffin)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH v2 7/9] ARM: STi: DT: STiH407: Add FDMA driver dt nodes.
Date: Fri, 11 Sep 2015 15:14:29 +0100	[thread overview]
Message-ID: <1441980871-24475-8-git-send-email-peter.griffin@linaro.org> (raw)
In-Reply-To: <1441980871-24475-1-git-send-email-peter.griffin@linaro.org>

These nodes are required to get the fdma driver working
on STiH407 based silicon.

Signed-off-by: Peter Griffin <peter.griffin@linaro.org>
---
 arch/arm/boot/dts/stih407-family.dtsi | 51 +++++++++++++++++++++++++++++++++++
 1 file changed, 51 insertions(+)

diff --git a/arch/arm/boot/dts/stih407-family.dtsi b/arch/arm/boot/dts/stih407-family.dtsi
index 838b812..da07474b 100644
--- a/arch/arm/boot/dts/stih407-family.dtsi
+++ b/arch/arm/boot/dts/stih407-family.dtsi
@@ -565,5 +565,56 @@
 						  <&phy_port2 PHY_TYPE_USB3>;
 			};
 		};
+
+		fdma0: fdma0-audio at 8e20000 {
+			compatible = "st,stih407-fdma-mpe31";
+			reg = <0x8e20000 0x20000>;
+			interrupts = <GIC_SPI 5 IRQ_TYPE_NONE>;
+			dma-channels = <16>;
+			#dma-cells = <3>;
+			st,fdma-id = <0>;
+			clocks = <&clk_s_c0_flexgen CLK_FDMA>,
+				 <&clk_s_c0_flexgen CLK_EXT2F_A9>,
+				 <&clk_s_c0_flexgen CLK_EXT2F_A9>,
+				 <&clk_s_c0_flexgen CLK_EXT2F_A9>;
+			clock-names = "fdma_slim",
+				      "fdma_hi",
+				      "fdma_low",
+				      "fdma_ic";
+		};
+
+		fdma1: fdma1-app at 8e40000 {
+			compatible = "st,stih407-fdma-mpe31";
+			reg = <0x8e40000 0x20000>;
+			interrupts = <GIC_SPI 7 IRQ_TYPE_NONE>;
+			dma-channels = <16>;
+			#dma-cells = <3>;
+			st,fdma-id = <1>;
+			clocks = <&clk_s_c0_flexgen CLK_FDMA>,
+				 <&clk_s_c0_flexgen CLK_TX_ICN_DMU>,
+				 <&clk_s_c0_flexgen CLK_TX_ICN_DMU>,
+				 <&clk_s_c0_flexgen CLK_EXT2F_A9>;
+			clock-names = "fdma_slim",
+				      "fdma_hi",
+				      "fdma_low",
+				      "fdma_ic";
+		};
+
+		fdma2: fdma2-free_running at 8e60000 {
+			compatible = "st,stih407-fdma-mpe31";
+			reg = <0x8e60000 0x20000>;
+			interrupts = <GIC_SPI 9 IRQ_TYPE_NONE>;
+			dma-channels = <16>;
+			#dma-cells = <3>;
+			st,fdma-id = <2>;
+			clocks = <&clk_s_c0_flexgen CLK_FDMA>,
+				 <&clk_s_c0_flexgen CLK_EXT2F_A9>,
+				 <&clk_s_c0_flexgen CLK_TX_ICN_DISP_0>,
+				 <&clk_s_c0_flexgen CLK_EXT2F_A9>;
+			clock-names = "fdma_slim",
+				      "fdma_hi",
+				      "fdma_low",
+				      "fdma_ic";
+		};
 	};
 };
-- 
1.9.1

  parent reply	other threads:[~2015-09-11 14:14 UTC|newest]

Thread overview: 41+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2015-09-11 14:14 [PATCH v2 0/9] Add support for FDMA DMA controller found on STi chipsets Peter Griffin
2015-09-11 14:14 ` [PATCH v2 1/9] dmaengine: st_fdma: Add STMicroelectronics FDMA DT binding documentation Peter Griffin
2015-09-11 20:36   ` Arnd Bergmann
2015-09-12 12:07     ` Peter Griffin
2015-09-14  8:19       ` Lee Jones
2015-09-29 10:04         ` Peter Griffin
2015-09-29 11:17           ` Arnd Bergmann
2015-09-29 12:11             ` Peter Griffin
2015-09-29 12:30               ` Arnd Bergmann
2015-09-29 13:42                 ` Peter Griffin
2015-09-29 14:15                   ` Arnd Bergmann
2015-10-13 11:18                     ` Peter Griffin
2015-09-11 14:14 ` [PATCH v2 2/9] dmaengine: st_fdma: Add st fdma platform specific header Peter Griffin
2015-09-11 20:32   ` Arnd Bergmann
2015-09-29  9:24     ` Peter Griffin
2015-09-29 11:10       ` Arnd Bergmann
2015-09-11 14:14 ` [PATCH v2 3/9] dmaengine: st_fdma: Add STMicroelectronics FDMA driver header file Peter Griffin
2015-10-08 15:43   ` Koul, Vinod
2015-10-13 10:43     ` Peter Griffin
2015-09-11 14:14 ` [PATCH v2 4/9] dmaengine: st_fdma: Add STMicroelectronics FDMA engine driver support Peter Griffin
2015-09-11 20:30   ` Arnd Bergmann
2015-09-29 10:23     ` Peter Griffin
2015-10-07 11:15   ` Vinod Koul
2015-09-11 14:14 ` [PATCH v2 5/9] dmaengine: st_fdma: Add xp70 firmware loading mechanism Peter Griffin
2015-10-07 11:22   ` Vinod Koul
2015-10-13 10:53     ` Peter Griffin
2015-09-11 14:14 ` [PATCH v2 6/9] dmaengine: st_fdma: Add fdma suspend and resume callbacks Peter Griffin
2015-10-07 11:23   ` Vinod Koul
2015-10-13 11:19     ` Peter Griffin
2015-10-13 11:33       ` Koul, Vinod
2015-09-11 14:14 ` Peter Griffin [this message]
2015-09-11 16:27   ` [PATCH v2 7/9] ARM: STi: DT: STiH407: Add FDMA driver dt nodes Lee Jones
2015-09-11 16:48     ` Peter Griffin
2015-09-11 17:55       ` Lee Jones
2015-09-11 18:06         ` Peter Griffin
2015-09-11 19:33           ` Lee Jones
2015-09-12 12:23             ` Peter Griffin
2015-09-11 14:14 ` [PATCH v2 8/9] MAINTAINERS: Add FDMA driver files to STi section Peter Griffin
2015-09-11 16:22   ` Lee Jones
2015-09-11 14:14 ` [PATCH v2 9/9] ARM: multi_v7_defconfig: Enable STi FDMA driver Peter Griffin
2015-09-11 16:22   ` Lee Jones

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1441980871-24475-8-git-send-email-peter.griffin@linaro.org \
    --to=peter.griffin@linaro.org \
    --cc=linux-arm-kernel@lists.infradead.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).